SAR Test Report-2

FCC ID: 2AKQUVZCKV505C

RF Exposure Info

Download: PDF
FCCID_4485228

omm 8 In Collaboration with -‘ CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinatt.com hitp://www.chinattl.en Impedance Measurement Plot for Head TSL Tri Si1 Log Mag 10.00d/ref 0.000d8 [FL] 50—00— rsa—ass.oo000 miz =25. 963 do 40.00 30.00 20.00 10. 00 0.000)) r —10.00 —20.00 i ~30.00 ~40.00 —50.00 x BM 511 swith (R+JX) scale 1.000U F1 bel] »1. 835.00000 mWz 48.931 o —4.8694 o zsui i ommeinUR Certificate No: Z19—60121 Page 6 of 8

bu in Collaboration with @x7JJ;j, a m CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com http=//www.chinattl.en DASYS Validation Report for Body TSL Date: 04.22.2019 Test Laboratory: CTTL, Beijing, China DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 — SN: 40166 Communication System: UID 0, CW; Frequency: 835 MHz; Duty Cycle: 1:1 Medium parameters used: {= 835 MHz; a = 0.942 S/m; s, = 56.82; p = 1000 kg/m3 Phantom section: Center Section DASYS Configuration: * Probe: EX3DV4 — SN3617; ConvF(9.61, 9.61, 9.61) @ 835 MHz; Calibrated: 1/31/2019 * Sensor—Surface: 1.4mm (Mechanical Surface Detection) + Electronics: DAE4 Sn1331; Calibrated: 2/6/2019 + Phantom: MFP_V5.1C ; Type: QD 000 P51CA; Serial: 1062 * Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7450) Dipole Calibration/Zoom Sean (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=Smm Reference Value = 56.07 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 3.50 W/kg SAR(I g) =2.34 W/kg; SAR(10 g) =1.56 W/kg Maximum value of SAR (measured) = 3.10 W/kg —1.98 —3.95 S3 _ TT TL —7.90 —9.88 0 dB =3.10 W/kg =4.91 dBW/kg Certificate No: Z19—60121 Page 7 of 8

ru in with TTIL _@a zs Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinatt.com hitp://www.chinattl.en Impedance Measurement Plot for Body TSL Tri si1 tog mag 10. 0ode/ ref 0.000de [FZ) I 5900 rea—ass. 00000 whe 22. 008 ce 40. 00 30.00 20.00 10. 00 0.000)} 4 —10.00 ~20.00 ~30.00 ~40.00 ~50.00 IIRM si1 smith (ReJ>) scate 1.000u [F1 vel] »1 835.00000 mz 45.349 n ~5.9435 n 32.07 Certificate No: Z19—60121 Page 8 of 8

s R 49109 Calibration Laboratory of i\“\\\\t/;’"/,} g Schweizerischer Kalibrierdienst Schmid & Partner ;lafigé s Service suisse d‘étalonnage Engineering AG 4 ns Servizio svizzero di taratura x A zy S K Enpat 5 Zeughausstrasse 43, 8004 Zurich, Switzerland /7;\?\\3 Swiss Calibration Service rbiiubs Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client Auden Certificate No: D1900V2—5d018_Jun19 |CALIBRATION CERTIFICATE | Object D1900V2 — SN:5d018 Calibration procedure(s) QA CAL—O5.v11 Calibration Procedure for SAR Validation Sources between 0.7—3 GHz Calibration date: June 27, 2019 This calibration certificate documents the traceability to national standards, which realize the physicalunits of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 03—Apr—19 (No. 217—02892/02893) Apr—20 Power sensor NRP—Z291 SN: 103244 03—Apr—19 (No. 217—02892) Apr—20 Power sensor NRP—Z291 SN: 103245 03—Apr—19 (No. 217—02893) Apr—20 Reference 20 dB Attenuator SN: 5058 (20k) 04—Apr—19 (No. 217—02894) Apr—20 Type—N mismatch combination SN: 5047.2 / 06327 04—Apr—19 (No. 217—02895) Apr—20 Reference Probe EX3DV4 SN: 7349 29—May—19 (No. EX3—7349_May19) May—20 DAE4 SN: 601 30—Apr—19 (No. DAE4—601_Apr19) Apr—20 Secondary Standards ID # Check Date (in house) Scheduled Check Power meter E44198 SN: GB39512475 30—Oct—14 (in house check Feb—19) In house check: Oct—20 Power sensor HP 8481A SN: US37202783 07—Oct—15 (in house check Oct—18) In house check: Oct—20 Power sensor HP 8481A SN: MY41092317 07—Oct—15 (in house check Oct—18) in house check: Oct—20 RF generator R&S SMT—06 SN: 100972 15—Jun—15 (in house check Oct—18) In house check: Oct—20 Network Analyzer Agilent E8358A SN: US41080477 31—Mar—14 (in house check Oct—18) In house check: Oct—19 Name Function Signature Calibrated by: Michael Weber Laboratory Technician WQI—- Approved by: Katia Pokovic Technical Manager /@ Issued: June 27, 2019 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D1900V2—50018_Jun19 Page 1 of 8

Calibration L Laboratory of wilyt», & t'// > S Schweizerischer Kalibrierdienst Schmid & Partner M c Service suisse d‘étalonnage Engineering AG prrok Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland 1,,4////\\\\\‘\? S swiss Calibration Service AMMS Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Measurement procedure for the assessment of Specific Absorption Rate (SAR) from hand—held and body—mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)", July 2016 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle! to the body axis. Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. SAR measured: SAR measured at the stated antenna input power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: D1900V2—5d018_Jun19 Page 2 of 8

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASYS V52.10.2 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 1900 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 40.0 1.40 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 41.4 +6 % 1.39 mho/m + 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 9.96 W/kg SAR for nominal Head TSL parameters normalized to 1W 40.3 Wikg + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 5.24 W/kg SAR for nominal Head TSL parameters normalized to 1W 21.1 Wikg * 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 53.3 1.52 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 54.2 + 6 % 1.50 mho/m + 6 % Body TSL temperature change during test <0.5 °C ——— ——— SAR result with Body TSL SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 250 mW input power 9.91 W/kg SAR for nominal Body TSL parameters normalized to 1W 40.1 W/kg * 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 5.25 Wikg SAR for nominal Body TSL parameters normalized to 1W 21.2 Wikg * 16.5 % (k=2) Certificate No: D1900V2—5d018_Jun19 Page 3 of 8

Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters with Head TSL Impedance, transformed to feed point 50.8 Q + 1.8 jQ Return Loss — 34.4 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 47.5 Q + 3.0 jQ Return Loss —28.1 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.196 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Certificate No: D1900V2—5d018_Jun19 Page 4 of 8

DASY5 Validation Report for Head TSL Date: 27.06.2019 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 — SN:5d018 Communication System: UID 0 — CW; Frequency: 1900 MHz Medium parameters used: f = 1900 MHz; 0 = 1.39 S/m; & =41.4; p = 1000 kg/m" Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C€63.19—2011) DASY52 Configuration: Probe: EX3DV4 — SN7349; ConvF(8.44, 8.44, 8.44) @ 1900 MHz; Calibrated: 29.05.2019 e Sensor—Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 Sn601; Calibrated: 30.04.2019 Phantom: Flat Phantom 5.0 (front); Type: QD 000 P50 AA; Serial: 1001 DASY52 52.10.2(1504); SEMCAD X 14.6.12(7470) Dipole Calibration for Head Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 109.9 V/m; Power Drift =—0.01 dB Peak SAR (extrapolated) = 18.5 W/kg SAR(1 g) = 9.96 W/kg; SAR(10 g) = 5.24 W/kg Maximum value of SAR (measured) = 15.5 W/kg —4.00 —12.00 —16.00 —20.00 0 dB = 15.5 W/kg = 11.90 dBW/kg Certificate No: D1900V2—50018_Jun19 Page 5 of 8

Impedance Measurement Plot for Head TSL File Yiew Channel Sweep Calibration Trace Scale Marker System Window Help 1800000 GHz 50.755§ C 148.43 pH 1.7718 0 m 1.900000 GHz 19. 112 mU 85 922 ® Ch1Avg= 20 Chi: Start 1.70000 GHz —— Stop 2.10000 GHz 00 00 00 00 .00 Ch1 = Chi: Start 1.70000 GHz Stop 2,10000 GHz Certificate No: D1900V2—5d018_Jun19 Page 6 of 8

DASY5 Validation Report for Body TSL Date: 27.06.2019 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 — SN:5d018 Communication System: UID 0 — CW; Frequency: 1900 MHz Medium parameters used: f = 1900 MHz; o = 1.5 S/m; & = 54.2; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC/ANSI €63.19—2011) DASY52 Configuration: Probe: EX3DV4 — SN7349; ConvF(8.42, 8.42, 8.42) @ 1900 MHz; Calibrated: 29.05.2019 Sensor—Surface: 1.4mm (Mechanical Surface Detection) Electronics: DAE4 $n601; Calibrated: 30.04.2019 Phantom: Flat Phantom 5.0 (back); Type: QD 000 P50 AA; Serial: 1002 DASY532 52.10.2(1504); SEMCAD X 14.6.12(7470) Dipole Calibration for Body Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 104.5 V/m; Power Drift =—0.06 dB Peak SAR (extrapolated) = 17.7 W/kg SAR(1 g) = 9.91 W/kg; SAR(10 g) = 5.25 W/kg Maximum value of SAR (measured) = 14.9 W/kg —3.80 —1.60 —11.40 ~15.20 —19.00 0 dB = 14.9 W/kg =11.73 dBW/kg Certificate No: D1900V2—5d018_Jun19 Page 7 of 8

Impedance Measurement Plot for Body TSL File View Channel Sweep Calibration Trace Scale Marker System Window Help 1.900000 GHz 47.544 0 248.32 pH 2.9645 O 1.900000 GHz 39.450 mU I 127.80 ° Ch1Avg= 20 i * Chi: Start 1.70000 GHz —— Stop 2.10000 GHz 1400000 GHz 10 00 00 00 Stop 2,10000 GHz Certificate No: D1900V2—5d018_Jun19 Page 8 of 8

_!\ &‘w@' A ;EW’I «7TL CALIBRA _p_ e—2 isem kGCNASz Beft _ |; TION LABORATORY Tm Zrany CALIBRATION Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China 4,/,,,/|\\“\\> CNAS LO570 Tel: +86—10—62304633—2512 Fax: +86—10—62304633—2504 t E—mail: ctt@chinattl.com Hitp://www.chinattl.cn Client ; Auden Certificate No: Z219—60141 CALIBRATIONCERTIFICATE Object DAE4 — SN: 913 Calibration Procedure(s) FF—211—002.01 Calibration Procedure for the Data Acquisition Electronics (DAEX) Calibration date: April 23, 2019 This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature(@213)c and humidity<70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Process Calibrator 753 1971018 20—Jun—18 (CTTL, No.J18X05034) June—19 Name Function Signature Calibrated by: Yu Zongying SAR Test Engineer % Reviewed by: Lin Hao SAR Test Engineer tfi'}dfv Approved by: Qi Dianyuan SAR Project Leader % Issued: April 25, 2019 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: Z19—60141 Page 1 of 3

e© .( Collaboration with @=‘7"7‘J, a \TiBmzzeee~" CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2512 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Hitp://www.chinattl.en Glossary: DAE data acquisition electronics Connector angle information used in DASY system to align probe sensor X to the robot coordinate system. Methods Applied and Interpretation of Parameters: «_ DC Voltage Measurement: Calibration Factor assessed for use in DASY system by comparison with a calibrated instrument traceable to national standards. The figure given corresponds to the full scale range of the voltmeter in the respective range. * Connector angle: The angle of the connector is assessed measuring the angle mechanically by a tool inserted. Uncertainty is not required. & The report provide only calibration results for DAE, it does not contain other performance test results. Certificate No: 19—60141 Page 2 of 3

e in Collaboration with e=x7"7"]J, a igmmeeae~"~ CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2512 Fax: +86—10—62304633—2504 E—mail: ctt@chinattl.com Hitp://www.chinattl.en DC Voltage Measurement AID — Converter Resolution nominal High Range: 1LSB= 6AuV , full range = —100... +300 mV Low Range: 1LSB = 61nV , full range = Pscac +3mV DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec Calibration Factors X ¥ Z High Range 403.999 + 0.15% (k=2) 404.406 + 0.15% (k=2) 404.961 + 0.15% (k=2) Low Range 3.98597 + 0.7% (k=2) 3.99424 + 0.7% (k=2) 4.01903 + 0.7% (k=2) Connector Angle Connector Angle to be used in DASY system 185.5°41° Certificate No: Z19—60141 Page 3 of 3

Calibration Laboratory of S Schweizerischer Kalibrierdienst Schmid & Partner c Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client Auden Certificate No: EX3—7350_Dec18 |CALIBRATION CERTIFICATE Object EX3DV4 — SN:7350 Calibration procedure(s) QA CAL—01.v9, QA CAL—14.v4, QA CAL—23.v5, QA CAL—25.v6 Calibration procedurefor dosimetric E—field probes Calibration date: December 14, 2018 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70% . Calibration Equipment used (M&TE critical for calibration) Primary Standards ID Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 04—Apr—18 (No. 217—02672/02673) Apr—19 Power sensor NRP—Z291 SN: 103244 04—Apr—18 (No. 217—02672) Apr—19 Power sensor NRP—Z291 SN: 103245 04—Apr—18 (No. 217—02673) Apr—19 Reference 20 dB Attenuator SN: 5277 (20%) 04—Apr—18 (No. 217—02682) Apr—19 Reference Probe ESSDV2 SN: 3013 30—Dec—17 (No. ES3—3013_Dec17) Dec—18 DAE4 SN: 660 21—Dec—17 (No. DAE4—660_Dec17) Dec—18 Secondary Standards ID Check Date (in house) Scheduled Check Power meter E44198 SN: GB41293874 06—Apr—16 (in house check Jun—18) In house check: Jun—20 Power sensor E4412A SN: MY41498087 06—Apr—16 (in house check Jun—18) In house check: Jun—20 Power sensor E4412A SN: 000110210 06—Apr—16 (in house check Jun—18) In house check: Jun—20 RF generator HP 8648C SN: US3642U01700 04—Aug—99 (in house check Jun—18) In house check: Jun—20 Network Analyzer E8358A SN: US41080477 31—Mar—14 (in house check Oct—18) In house check: Oct—19 Name Function Signature Calibrated by: Leif Klysner Laboratory Technician W % Approved by: Katia Pokovie Technical Manager /gf% issued: December 15, 2018 This calibration certificate shall not be reproduced except in full without written approval of the laboratory Certificate No: EX3—7350_Dec18 Page 1 of 39

Calibration Laboratory of FayZ/% s\ Schweizerischer Kalibrierdienst Schmid & Partner i%mf g Service suisse d‘étalonnage Engineering AG L zes s Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland ‘«/,’,’fi\\“\g Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid NORMx,.y,z sensitivity in free space ConvF sensitivity in TSL / NORMx,y,z DCP diode compression point CF crest factor (1/duty_cycle) of the RF signal A, B, C, D modulation dependentlinearization parameters Polarization ip rotation around probe axis Polarization 3 8 rotation around an axis that is in the plane normal to probe axis (at measurement center), ie., 8 = 0 is normal to probe axis Connector Angle information used in DASY system to align probe sensor X to the robot coordinate system Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, ", "Measurement procedure for the assessment of Specific Absorption Rate (SAR) from hand— held and body—mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)", July 2016 ) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Methods Applied and Interpretation of Parameters: NORMx,y,z: Assessed for E—field polarization 9 = 0 (f < 900 MHz in TEM—cell; f> 1800 MHz: R22 waveguide). NORMx,y,2 are only intermediate values, i.e., the uncertainties of NORMx,y,z does not affect the E*—field uncertainty inside TSL (see below ConvF). NORM(®)x,y,z = NORMx,y,z * frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency response is included in the stated uncertainty of ConvF. DCPx,y,z: DCP are numerical linearization parameters assessed based on the data of power sweep with CW signal (no uncertainty required). DCP does not depend on frequency nor media. PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal characteristics Ax,y,2; Bxy,2; Cx,y,2; Dx,y,z; VRx,y,z: A, B, C, D are numerical linearization parameters assessed based on the data of power sweep for specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across the diode. ConvF and Boundary Effect Parameters: Assessed in flat phantom using E—field (or Temperature Transfer Standard for f < 800 MHz) and inside waveguide using analytical field distributions based on power measurements for f > 800 MHz. The same setups are used for assessment of the parameters applied for boundary compensation (alpha, depth) of which typical uncertainty values are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx,y,z * ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in DASY version 4.4 and higher which allows extending the validity frormn + 50 MHz to + 100 MHz. Spherical isotropy (3D deviation from isotropy): in a field of low gradients realized using a flat phantom exposed by a patch antenna. Sensor Offset: The sensor offset corresponds to the offset of virtual measurement center from the probe tip (on probe axis). No tolerance required. Connector Angle: The angle is assessed using the information gained by determining the NORMx (no uncertainty required). Certificate No: EX3—7350_Dec18 Page 2 of 39

EX3DV4 - SN:7350 December 14 , 2018 Probe EX3DV4 SN:7350 Manufactured: October 13 , 2014 Calibrated : Oecember 14, 2018 Calibrated for OASY/EASY Systems (Note: non-compatible with DASY2 system!) Certificate No: EX3-7350 Dec18 Page 3 of 39

EX3DV4— SN:7350 December 14, 2018 DASY/EASY — Parameters of Probe: EX3DV4 — SN:7350 Basic Calibration Parameters Sensor X Sensor Y Sensor Z Unc (k=2) Norm (uV/(V/m))"* 0.55 0.56 0.45 £10.1% DCP (mV)" 100.7 89.9 105.8 Modulation Calibration Parameters UID Communication System Name A B C D VR Unc® dB dByuV dB mV (k=2) o Cw x 0.0 0.0 1.0 0.00 1562 #35% Y 0.0 0.0 1.0 175.3 Z 0.0 0.0 1.0 159.5 Note: For details on UID parameters see Appendix. Sensor Model Parameters C1 C2 a T1 T2 T3 T4 T5 T6 fF fF V ms.V~* ms.V~* ms V~ V~* 45.12 335.3 35.43 10.83 0.000 5.089 0.862 0.307 1.006 NJ<[x 42.19 324.9 37.46 7.110 0.156 5.089 0.082 0.489 1.008 33.97 252.0 35.40 6.365 0.000 5.059 1.980 0.000 1.009 The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. * The uncertainties of Norm X,Y.Z do not affect the E—field uncertainty inside TSL (see Pages 5 and 6). © Numerical linearization parameter: uncertainty not required © Uncertainty is determined using the max. deviation from linear response applying rectangulardistribution and is expressed for the square of the field value Certificate No: EX3—7350_Dec18 Page 4 of 39

EX3DV4— SN:7350 December 14, 2018 DASY/EASY — Parameters of Probe: EX3DV4 — SN:7350 Calibration Parameter Determined in Head Tissue Simulating Media Relative Conductivity Depth * Unc f(MHz)* Permittivity" (S/m)" ConvFX ConvFY ConvFZ Alpha® _(mm) (k=2) 750 41.9 0.89 10.32 10.32 10.32 0.56 0.80 £12.0% 835 41.5 0.90 9.93 9.93 9.93 0.56 0.82 #12.0 % 900 41.5 0.97 9.74 9.74 9.74 0.49 0.85 +12.0 % 1450 40.5 1.20 8.68 8.68 8.68 0.37 0.80 £12.0 % 1750 40.1 1.37 8.63 8.63 8.63 0.40 0.80 +12.0 % 1900 40.0 1.40 8.24 8.24 8.24 0.31 0.84 +12.0 % 2100 39.8 1.49 8.32 8.32 8.32 0.35 0.84 £12.0 % 2300 39.5 1.67 7.88 7.88 7.88 0.31 0.85 +12.0% 2450 39.2 1.80 7.53 7.53 7.53 0.42 0.80 £12.0 % 2600 39.0 1.96 7.35 7.35 7.35 0.46 0.84 +12.0 % 3300 38.2 2.71 7.26 7.26 7.26 0.20 1.20 £13.1 % 3500 37.9 2.91 7.22 7.22 7.22 0.25 1.20 +13.1% 3700 37.7 3.12 7.03 7.03 7.03 0.30 1.25 £13.1% 3900 37.5 3.32 6.84 6.84 6.84 0.21 1.70 £13.1 % 4600 36.7 4.04 6.75 6.75 6.75 0.25 1.70 £13.1 % 5200 36.0 4.66 5.38 5.38 5.38 0.40 1.80 £13.1 % 5300 35.9 4.76 5.17 5.17 5.17 0.40 1.80 +131 % 5500 35.6 4.96 4.80 4.80 4.80 0.40 1.80 £13.1 % 5600 35.5 5.07 4.61 4.61 4.61 0.40 1.80 £13.1 % 5800 35.3 5.27 4.79 4.79 4.79 0.40 1.80 £13.1 % © Frequency validity above 300 MHz of + 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS of the ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. Frequency validity below 300 MHz is + 10, 25, 40, 50 and 70 MHz for ConvF assessments at 30, 64, 128, 150 and 220 MHz respectively. Above 5 GHz frequency validity can be extended to + 110 MHz. "At frequencies below 3 GHz, the validity of tissue parameters (s and a) can be relaxed to + 10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (s and a) is restricted to + 5%. The uncertainty is the RSS of the ConvF uncertainty for indicated target tissue parameters. © Alpha/Depth are determined during calibration. SPEAG warrants that the remaining deviation due to the boundary effectafter compensation is always less than + 1% for frequencies below 3 GHz and below + 2% for frequencies between 3—6 GHz at any distance larger than half the probe tip diameter from the boundary Certificate No: EX3—7350_Dec18 Page 5 of 39

EX3DV4— SN:7350 December 14. 2018 DASY/EASY — Parameters of Probe: EX3DV4 — SN:7350 Calibration Parameter Determined in Body Tissue Simulating Media Relative Conductivity Depth ° Unc f(MHz)* Permittivity" (S/m)" ConvFX ConvFY ConvFZ Aipha® _(mm) (k=2) 750 55.5 0.96 10.31 10.31 10.31 0.49 0.85 £12.0 % 835 55.2 0.97 10.07 10.07 10.07 0.49 0.80 +*12.0 % 900 55.0 1.05 9.94 9.94 9.94 0.51 0.80 +12.0 % 1450 54.0 1.30 8.74 8.74 8.74 0.32 0.80 +12.0 % 1750 53.4 149 8.38 8.38 8.38 0.35 0.90 £12.0 % 1900 53.3 1.52 8.05 8.05 8.05 0.35 0.92 £12.0 % 2100 53.2 1.62 8.23 8.23 8.23 0.26 1.10 £12.0 % 2300 52.9 1.81 7.80 7.80 7.80 0.45 0.81 £+12.0 % 2450 52.7 1.95 7.69 7.69 7.69 0.37 0.87 £12.0 % 2600 52.5 216 7.49 7.49 7.49 0.33 0.89 £12.0 % |__3300 51.6 3.08 715 715 7.15 0.25 1.30 +131 % 3500 51.3 3.31 6.98 6.98 6.98 0.22 1.25 +13.1 % 3700 51.0 3.55 6.97 6.97 6.97 0.25 1.25 £13.1 % 3900 51.2 3.78 6.82 6.82 6.82 0.20 1.80 £13.1 % 4600 49.8 4.60 6.62 6.62 6.62 0.20 1.80 £13.1% 5200 49.0 5.30 4.73 4.73 4.73 0.50 1.90 £13.1% 5300 48.9 5.42 4.58 4.58 4.58 0.50 1.90 £13.1% 5500 48.6 5.65 4.26 4.26 4.26 0.50 1.90 £13.1% 5600 48.5 5.77 4.09 4.09 4.09 0.50 1.90 +13.1 % 5800 48.2 6.00 4.20 4.20 4.20 0.50 1.90 £13.1 % © Frequency validity above 300 MHz of + 100 MHz only applies for DASY v4.4 and higher(see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS of the ConvF uncertainty at calibration frequency and the uncertaintyfor the indicated frequency band. Frequency validity below 300 MHz is + 10, 25, 40, 50 and 70 MHz for ConvF assessments at 30, 64, 128, 150 and 220 MHz respectively. Above 5 GHz frequency validity can be extended to £ 110 MHz. * At frequencies below 3 GHz, the validity of tissue parameters (e and &) can be relaxed to + 10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (c and ) is restricted to + 5%. The uncertainty is the RSS of the ConvF uncertainty for indicated target tissue parameters. © Alpha/Depth are determined during calibration. SPEAG warrants that the remaining deviation due to the boundary effect after compensation is always less than + 1% for frequencies below 3 GHz and below + 2% for frequencies between 3—6 GHz at any distance larger than half the probe tip diameter from the boundary. Certificate No: EX3—7350_Dec18 Page 6 of 39

EX3DV4— SN:7350 December 14, 2018 Frequency Response of E—Field Frequency response (normalized) (TEM—Cell:ifi110 EXX, Waveguide: R22) BOiDO ted Uncertainty of Frequency Response of E—field: * 6.3% (k=2) Certificate No: EX3—7350_Dec18 Page 7 of 39

EX3DV4— SN:7350 December 14, 2018 Receiving Pattern (¢), 8 = 0° £=600 MHz,TEM f=1800 MHz,R22 ~*gs"* a & C s °_ % s e & % e e e Tot X Y 2 Tot X Y 2 Error [dB] £o io $ h 4o h es gh gg ut ge d pg £ on ge pe d aieg t .5 1 $3 3 SMcck I <3 T a3 I ~150 ~100 «éO [3 50 100 150 Roll [*] e : ] * | ® 10%2 600 MHz 1800 MHz 2500 MHz Uncertainty of Axial Isotropy Assessment: £ 0.5% (k=2) Certificate No: EX3—7350_Dec18 Page 8 of 39

EX3DV4— SN:7350 December 14, 2018 Dynamic Range f(SARneaq) (TEM cell , feyyi= 1900 MHz) 105 3 104 C & J ® 2 € 10%; 102 10 102 10 10 10‘ 10 10 SAR [mWi/cm3] _*] not compensated compensated 2 14 m . kA § ia *L a4— 2 T T t T T 103 102 101 100 101 102 103 R SAR [mW/cm3] L* not compensated compensated Uncertainty of Linearity Assessment: £ 0.6% (k=2) Certificate No: EX3—7350_Dec18 Page 9 of 39

EX3DV4— SN:7350 December 14, 2018 Conversion Factor Assessment f= 835 MHz.WGLS R9 (H_convF) f= 1900 MHz,.WGLS R22 (H_convF) 10 2s| s % 2 s .4 3 o & & 10 | | | | { *=: o 1 i . of — — w4 o 10 1 2o xo a o 10 1 x 30 ao fmm s {mm} a * * * #) araivical reasaed nahmce Deviation from Isotropy in Liquid Error (¢, 8), f = 900 MHz Deviation —~1.0 —0.8 —0.6 —0.4 —0.2 00 02 04 0.6 08 1.0 Uncertainty of Spherical Isotropy Assessment: £ 2.6% (k=2) Certificate No: EX3—7350_Dec18 Page 10 of 39

EX3DV4- SN:7350 December 14 , 2018 DASY/EASY - Parameters of Probe: EX3DV4 - SN:7350 Other Probe Parameters Sensor Arrangement Triangular Connector Angle n 131.2 Mechanical Surface Detection Mode enabled Optical Surface Detection Mode disabled Probe Overall Length 337mm Probe Body Diameter 10mm Tip Length 9mm Tip Diameter 2.5mm Probe Tip to Sensor X Calibration Point 1 mm Probe Tip to Sensor Y Calibration Point 1 mm Probe Tip to Sensor Z Calibration Point 1 mm I Recommended Measurement Distance from Surface 1.4 mm Certificate No: EX3-7350 Dec18 Page 11 of 39

EX3DV4— SN:7350 December 14, 2018 Appendix: Modulation Calibration Parameters uiD Communication System Name A B C D VR Max aB dBvpV aB mV Unc® (ke2) 0 CW X 0.00 0.00 1.00 0.00 156.2 £3.5 % Y 0.00 0.00 1.00 175.3 Z 0.00 0.00 1.00 159.5 10010— SAR Validation (Gquare, 100ms, 10ms) X 2.20 66.84 10.16 10.00 20.0 +9.6 % CAA Y 1.65 6349 8.44 20.0 F4 1.52 62.80 1.75 20.0 10011— UMTS—FDD (WCDMA) X 1.21 70.82 17.28 0.00 150.0 £9.6 % CaB Y 0.84 64.71 13.16 150.0 F 142 75.02 19.12 150.0 10012— IEEE 802.11b Wiri 2.4 GHz (DSSS, 1 X 1.18 64.72 16.13 0.41 150.0 £9.6 % CaB Mops) Y 1.05 62.55 14.21 150.0 2 1.16 65.38 16.59 150.0 10013 IEEE 802.11g WiFi 2.4 GHz (DSSS— X 4.85 66.90 17.39 146 150.0 +9.0 % CaB OFDM, 6 Mbps) Y 4.73 66.42 16.94 150.0 2 4.67 67.14 17.37 150.0 10021— GSNM—FDD (TDMA, GMSK) X 100.00 114.12 26.66 9.39 50.0 +9.6 % DAC Y 100.00 110.74 25.17 50.0 2 100.00 107 44 23.45 50.0 10023— GPRS—FDD (TDMA, GMSK, TN 0) X 100.00 113.27 26.32 9.57 50.0 +9.6 % DAC Y 100.00 110.05 24.92 50.0 Fa 100.00 106.59 23.12 50.0 10024— GPRS—FDD (TDMA, GMSK, TN 0—1) xX 100.00 118.81 27.76 6.56 60.0 +9.0 % DAG Y 100.00 11215 24.61 60.0 Z 100.00 110.90 23.81 60.0 10025— EDGE—FDD (TDMA, 8PSK, TN 0) X 9.89 104.70 44.34 12.57 50.0 +9.6 % DAC Y 3.86 69.98 26.77 50.0 Z 4.97 79.83 32.39 50.0 10026— EDGE—FDD (TDMA, 8SPSK, TN 0—1) X 10.32 100.14 37.35 9.56 60.0 £9.6 % DAC Y 6.26 85.71 31.18 60.0 2 6.39 88.14 32.63 60.0 10027— GPRS—FDD (TDMA, GMSK, TN 0—1—2) X 100.00 125.86 30.02 4.80 80.0 +9.0 % DaAC Y 100.00 114.04 24.56 80.0 Z 100.00 119.67 26.67 80.0 10028— GPRS—FDD (TDMA, GMSK, TN 0—1—2—3) X 100.00 135.85 33.44 3.55 100.0 +9.0 % DAC Y 100.00 115.17 24.27 100.0 2 100.00 140.08 34.14 100.0 10028— EDGE—FDD (TDMA, 8PSK, TN 0—1—2) X 5.51 83.33 20.36 7.80 80.0 +9.0 % DAC Y 4.14 75.91 25.72 80.0 Z 4.04 76.74 26.48 80.0 10030— IEEE 802.15.1 Bluetooth (GFSK, DH1) X 100.00 119.20 27.48 5.30 70.0 +9.0 % CAA Y 100.00 110.26 2328 70.0 2 100.00 110.28 23.03 70.0 10031— IEEE 802.15.1 Bluelooth (GFSK, DH3) X 100.00 149.14 36.96 1.88 100.0 £9.6 % CAA Y 100.00 94.08 14.75 100.0 2 100.00 184.80 48.80 100.0 Certificate No: EX3—7350_Dect8 Page 12 of 39

EX3DV4— SN:7350 December 14, 2018 10082— IEEE 802.15.1 Bluetooth (GFSK, DHS) X 100.00 18669 49.93 117 100.0 £96% CAA Y 0.14 60.00 3.69 100.0 Z 99.99 130.00 138.11 100.0 10033— IEEE 802.15.1 Bluetooth (PI4—DQPSK, X 100.00 135.86 37.38 5.30 70.0 £9.6 % CAA DH1) x 18.80 105.40 26.75 70.0 Z 100.00 129.25 33.66 70.0 10034— IEEE 802.15.1 Bluetooth (PV4—DQPSK, X 17.29 105.57 27.79 1.88 100.0 +9.6 % CaA DH3) Y 2.04 73.36 16.21 100.0 Z 100.00 12348 29.63 |_ 100.0 10035— IEEE 802.15.1 Bluetooth (PI4—DQPSK, X 5.32 88.79 22.56 117 100.0 £9.6 % CAA DHS) Y 1.34 68.55 13.72 100.0 2 26.90 106.48 25.25 100.0 10036— IEEE 802.15.1 Bluetooth (8—DPSK, DH1) X 100.00 136.49 37.67 5.30 70.0 +9.6 % CAA Y 41.80 118.42 32.21 70.0 2 100.00 130.02 34.02 70.0 10037 IEEE 802.15.1 Bluetooth (8—DPSK, DH3) X 13.23 101.81 26.76 1.88 100.0 £9.6 % CAA Y 1.88 72.38 15.80 100.0 H 94.58 12288 2048 100.0 10038— IEEE 802.15.1 Bluetooth (8—DPSK, DHS) X 541 89.47 22.93 117 100.0 £9.6 % CAA Y 1.34 68.82 13.96 100.0 Z 32.95 109.91 26.31 100.0 10038— CDMA2000 (1xRTT, RC1) X 2.95 79.27 18.53 0.00 150.0 +9.0 % CaB Y 1.10 65.76 11.61 150.0 2 6.65 88.36 19.64 150.0 10042— 1S—54 / I8—136 FDD (TDMAFFDM, PI4— X 100.00 111.38 24.74 7.78 50.0 +9.6 % CAB DQPSK, Halfrate) Y 100.00 106.54 2248 50.0 Z 100.00 104.31 21.30 50.0 10044— IS—91/EIATIA—553 FDD (FDMA, FM) X 0.00 107.10 0.54 0.00 150.0 £9.6 % CAA Y 0.05 120.35 5.82 150.0 Z 0.01 126.04 5.48 150.0 10048— DECT (TDD, TDMA/FDM, GFSK, Full X 100.00 108.44 25.50 13.80 25.0 £9.6 % CAA Stot, 24) Y 100.00 105.78 24.66 25.0 2 25.36 87.54 19.07 25.0 10049— DECT (TDD, TDMA/FDM, GFSK, Double X 130.00 138.61 31.02 10.79 40.0 +9.0 % CAA Slot, 12) Y 106.59 108.69 24.54 40.0 2 i7769 110.37 2386 40.0 10056— UMTS—TDD (TD—SCDMA, 1.28 Mcps) xX 100.00 127.91 34.08 9.03 50.0 £9.6 % CAA Y |_100.00 124.20 33.06 50.0 Z 100.00 121.05 31.20 50.0 10058— EDGE—FDD (TDMA, 8PSK, TN 0—1—2—3) xX 4.19 77.04 25.71 6.55 100.0 £9.6 % DAC £ 3.38 71.92 25.02 100.0 F4 3.30 72.62 23.73 100.0 10059— IEEE 802.11b WiFi 2.4 GHz (DSSS, 2 X 1.22 66.00 16.92 0.61 110.0 +9.6 % CAB Mops) Y 1.05 63.32 14.72 110.0 2 1.18 66.56 17.31 110.0 10060— IEEE 802.1 tb WiFi 2.4 GHz (DSSS, 5.5 X 100.00 150.32 40.79 1.30 110.0 £9.6 % cas Mops) Y 3.34 80.84 23.58 110.0 Z 100.00 155.46 4249 110.0 Certificate No: EX3—7350_Dect8 Page 13 of 39

EX3DVA— SN:7360 December 14, 2018 10061— IEEE 802.11b WiFi 2.4 GHz (DSSS, 11 X 4.14 90.83 27 32 2.04 110.0 £9.6 % CAB NMops) Y 1.81 74.98 20.46 110.0 2 3.30 88.77 26.75 110.0 10062— IEEE 802.1ta/h WiFi 5 GHz (OFDM, 6 X 4.06 66.92 16.74 0.49 100.0 +9.0 % [ee Mops) Y 4.52 66.36 16.30 100.0 2 449 67.18 16.62 100.0 10063— IEEE 802.11a/h WiFi 5 GHz (OFDM, 9 X 4.68 67.01 16.85 0.72 100.0 +9.0 % CAG Mops) Y 4.54 66.45 16.40 100.0 2 4.50 67.27 16.92 100.0 10064— IEEE 802.11a/h WiFi 5 GHz (OFDM, 12 X 4.96 67.26 17.07 0.86 100.0 +9.6 % CAG Mbps) Y 4.81 66.72 16.65 100.0 2 4.73 6744 17.09 100.0 10065— IEEE 802.11a/h WiFi 5 GHz (OFDM, 18 X 4.82 67.15 1718 121 100.0 +9.0 % CAC Mops) Y 4.68 66.60 16.76 100.0 F4 4.60 6728 17.18 100.0 10066— IEEE 802.11a/n WiFi 5 GHz (OFDM, 24 X 4.83 67.17 17.36 146 100.0 £9.6 % CAG Mops) Y 4.69 66.62 16.93 100.0 Z 4.60 67.25 17.33 100.0 10067— IEEE 802.11a/h WiFi 5 GHz (OFDM, 36 X 5.12 67.33 17.80 2.04 100.0 £9.6 % Cac Mbps) Y 4.98 66.86 17.43 100.0 2 4.88 5748 17.78 100.0 10068— IEEE 802.11a/h WiFi 5 GHz (OFDM, 48 X 5.15 67.33 18.02 2.55 100.0 +9.6 % cac Mops) Y 5.01 66.83 17.63 100.0 2 4.89 67.35 17.93 100.0. 10069— IEEE 802.11a/h WiFi 5 GHz (OFDM, 54 X 5.23 67.33 18.21 2.67 100.0 +9.6 % CAC Mops) Y 5.09 66.86 17.84 100.0 2 4.95 67.36 18.11 100.0 10071— IEEE 802.119 WiFi 24 GHz X 4.94 66.97 17.63 1.99 100.0 £9.6 % CAB (DSSS/OFDM, 9 Mbps) x 4.82 66.50 17.26 100.0 Z 4.75 67.17 17.65 100.0 10072— IEEE 802.119 WiFi 2.4 GHz X 4.91 6729 17.07 2.30 100.0 £9.6 % CaAB (DSSS/OFDM, 12 Mbops) Y 4.78 66.77 17.47 100.0 2 4.70 67.41 17.85 100.0 10073— IEEE 802.119 WiFi 24 GHz s 4.95 6742 18.20 2.83 100.0 £9.0 % cas (DSSSIOFDM, 18 Mbps) Y 4.83 66.91 17.80 100.0 2 4.75 67.57 18.19 100.0 10074— IEEE 802.119 WiFi 2.4 GHz X 4.92 67.28 18.35 3.30 100.0 +9.6 % cas (DSSSIOFDM, 24 Mbps) Y 4.81 66.79 17.95 100.0 Z 4.74 67.48 10.33 100.0 10075— IEEE 802.119 WiFi 2.4 GHz X 4.94 67.35 18.66 3.82 90.0 +9. % cas (DSSS/OFDM, 36 Mops) i 4.82 66.84 18.25 90.0 _| 2 4.75 67.44 18.96 90.0 10076— IEEE 802.119 WiFi 2.4 GHz xX 4.95 67.10 18.76 4.15 90.0 +9.0 % cas (DSSS/OFDM, 48 Mbps) Y 4.84 66.64 18.38 90.0 2 4.77 67.26 18.71 90.0 10077— IEEE 802.119 WiFi 2.4 GHz X 4.97 67.16 18.86 4.30 90.0 £9.6 % Cas _{DSSS/OFDM, 54 Mops) Y 4.87 66.71 18.48 90.0 Z 4.80 67.35 18.82 90.0 Certiicate No: EX3—7350_Dec18 Page 14 of 39

EX3DV4— SN:7350 December 14, 2018 10081— CDMA2000 (1xRTT, RC3) X 1.08 70.13 14.57 0.00 150.0 +9.0 % CAB Y 0.57 62.09 9.09 150.0 Z 1.07 70.71 13.14 150.0 10082— 18—54 / I8—136 FDD (TDMA/FDM, PI4— X 3.00 66.17 6.10 4.77 80.0 +9.6 % CaBs DQPSK, Fullrate) Y 0.57 60.00 3.29 80.0 Z 0.61 60.00 2.86 80.0 10090— GPRS—FDD (TOMA, GMSK, TN 0—4) X 100.00 11883 27.79 6.56 60.0 £9.6 % DAG Y 100.00 112.27 24.08 60.0 2 100.00 110.95 23.65 60.0 10097— UMTS—FDD (HSDPA) X 1.97 69.49 16.73 0.00 1500 £96% cas Y 1.62 66.08 14.34 150.0 2 220 72.57 17.83 150.0 10098— UMTS—FDD (HSUPA, Subtest 2) s 1.93 69.49 16.72 0.00 150.0 £9.6 % CaB Y 1.59 66.01 14.30, 150.0 2 215 72.57 17.85 150.0 10089— EDGE—FDD (TDMA, 8PSK, TN 0—4) X 10.46 100.47 3746 9.56 60.0 £9.6 % DAC Y 6.31 85.68 31.25 60.0 Z 6.45 88.36 82.71 60.0 10100— LTE—FDD (SC—FDMA, 100% RB, 20 X 3.31 7169 17.50 0.00 150.0 £96% CAE MHz, QPSK) Y 2.81 68.64 15.71 150.0 2 3.29 72.55 18.07 150.0 10101— LTE—FDD (SC—FDMA, 100% RB, 20 s 3.20 68.11 16.36 0.00 150.0 £96% CAE MHz, 16—QAM) Y 3.04 66.61 15.93 150.0 2 3.19 68.46 16.62 150.0 10102 LTE—FDD (SC—FDMA, 100% RB, 20 X 3.39 68.03 1642 0.00 150.0 +9.0 % CAE MHz, 64—0AM) Y 315 66.64 15.46 150.0 2 3.29 6841 16.68 150.0 10103— LTE—TDD (SC—FDMA, 100% RB, 20 X 6.56 78.07 21.95 3.98 65.0 +9.0 % cas MHz, QPSK) Y 5.15 73.76 20.02 65.0 Z 5.61 T655 21.41 65.0 10104— LTE—TDD (SC—FDMA, 100% RB, 20 X 5.99 74.23 2111 3.98 65.0 +9.6 % cas MHz, 16—GAM) Y 5.23 71.66 19.82 65.0 2 5.22 72.67 20.40 65.0 10105— LTE—TDD (SC—FDMA, 100% RB, 20 x 5.81 7342 21.06 3.98 65.0 £9.6 % CAG MHz, 64—GAM) Y 4.09 70.08 19.38 65.0 2 4.98 7145 20.11 65.0 10108— LTE—FDD (SC—FDMA, 100% RB, 10 X 288 70.93 17.35 0.00 1500 £96% CAG MHz, QPSK) Y 243 67.93 15.51 150.0 £ 2.85 72.10 18.03 150.0 10108— LTE—FDD (SC—FDMA, 100% RB, 10 x 2.95 68.08 16.32 0.00 1500 £96% caG MHz, 16—GAM) Y 2.68 66.39 15.12 150.0 Z 2.86 68.76 16.64 150.0 10110— LTE—FDD (SC—FDNMA, 100% RB, 5 MHz, X 2.35 70.24 17.07 0.00 1500 £9.6% CaG arsk) Y 1.94 66.95 14.93 150.0 2 2.35 71.97 17.83 150.0 10111— LTE—FDD (SC—FDMA, 100% RB, 5 MHz, x 2.71 69.29 16.77 0.00 150.0 £9.6 % CaG 16—QAM) Y 2.36 66.97 15.13 150.0 2 2.76 7147 17.40 150.0 Certificate No: EX3—7350_Dec18 Page 15 of 39

EX3DV4— SN:7350 December 14, 2018 10112 LTE—FDD (SC—FDMA, 100% RB, 10 x 3.07 68.03 16.34 0.00 150.0 £96% cas MHiz, 64—QAM) | Y 281 6647 | 1522 150.0 2 206 se.76 _|_16.68 150.0 10113— LTE—FDD (GC—FDMA, 100% RB, SMHz, X 285 sasr 1685 0.00 1500 £96% caG 64—0AM) y 251 6720 1532 |_150.0 2 290 Ti2s 1747 150.0 10114— IEEE 802.11n (HT Greenfield, 13.5 X 512 srao f6e2 o00 1500 ©96% cac Mbps, BPSK) Y |_4so s6s4 16.22 150.0 2 495 erso 16.73 150.0 10115 IEEE 802.1 in (HT Greenfield, 81 Mbps, X 5.39 Br4e ises ooo is00 £96% cac 16—0AM) Y sz sees 1628 150.0 7 518 ers1_| 16.73 150.0 10116— IEEE 802.11n (HT Greenfield, 135 Mbps, X 5.21 erse i6es o00 1500 £96% cac 64—0AM) Y_| 506 6702 1624 150.0 2| 503 ere8 _|_16.74 150.0 10117— IEEE 802.11n (HT Mixed, 13.5 Mops, x 508 eras i656 0.00 1500 £96% Cac sPSsi) y 286 6671 1618 150.0 Z 494 6742 16.71 150.0 10118— IEEE 802.11n (HT Mixed, 81 Mbps, 16— X 5.46 Bree fere o00 1500 £96% cac QAM) Y 53 6r.is 16.40 150.0 2 526 6r.72 16.84 150.0 10119 IEEE 802.11n (HT Mixed, 135 Mbps, 64— X 5.19 erse 662 000 1500 £96% cac cav) Y 506 s6.e9 16.24 150.0 2 sos e7.e9 _|_16.76 150.0 10140— LTE—FDD (SC—FDMA, 100% RB, 15 x 342 sa04 1634 0.00 1500 £96% cae MHz, 16—0AM) y 318 6665 15.37 150.0 2 in 6a.4a _|_16.60 150.0 1oi41— LTE—FDD (SC—FDMA, 100% RB, 15 x as4 sa11 te4s 000 1500 £96% cae Mtiz, 64—QAM) y—1 38 6681_| 1558 150.0 z s44 case 16.77 |__ 150.0 10142— LTE—FDD (SC—FDMA, 100% RB, 3 MHz, X 216 Toés t6.88 0.00 1500 £96% cae arsk) y 168 sesr 1421 150.0 2 226 7320 _|_17.64 150.0 10148— LTE—FDD (SC—FDMA, 100% R&, 3 MHz, x 264 Tose 1664 0.00 1500 £96% cae 16—0AM) Ti —iG 6705 1420 150.0 z2 282 73.05 _|_17.06 150.0 1014d— LTE—FDD (SC—FDMA, 100% RB, 3 MHz, X 232 sree 1477 o00 is00 £96% cae | 64—0AM) YJ 184 501| 1277 150.0 2 212 6787 |_14.10 150.0 10145— LTE—FDD (SC—FDMA, 100% RB, 14 x im seso t24s 0.00 is00 £96% CaF MHz, OPSK) y |_o%6 s162 568 150.0 z 076 6197 827 150.0 10146— LTE—FDD (SC—FONA, 100% RB, 14 x 184 seo9s 1129 000 1500 £96% Car MHz, 16—0AM) Y 133 6247 a85 150.0 2 i04 6132 |_7.05 150.0 10147 LTE—FDD (SC—FDOMA, 100% RB, 14 x 224 dase 1248 000 1500 £96% Car MHz, 64—0AM) y 143 sa21_| 936 150.0 2| i12 e189 _|_7.45 150.0 Certificate No: EX3—7350_Dect8 Page 16 of 39

EX3DV4— SN:7350 December 14, 2018 10149— LTE—FDD (SC—FDMA, 50% RB, 20 MHz, x 2.96 68.15 16.37 0.00 150.0 £96% cae 16—0AM) y 269 6645 1517 1500 2 287 6884 16.70 150.0 T0150— |LTEFDD(SGFDMA,S0%RE, 20MHz, x a.08 6800 i63o 000 1500 £96% cae 64—aAM) y 282 se52 1526 1500 2| 290 sa84 16.73 150.0 To1s1— LTE—TDD(GCFDMA.SO%RE, 2OMHz, x 7.04 ai28 2337 398 650 £906% cas arsk) y s Tess 2129 650 z 610 8027 2300 65.0 Tois2 |LTETDD(SGFDMA, S0% RE,20MHz, X 557 rads 2006 398 650 £90% cac 16—0AM) y 476 Tise 1946 650 z |_480 7293 |_20.10 65.0 Toiss— |LTE—TDD(SGFDMA, S0% RE, 20MHz, X 5.92 raar 2170 98 650 +96% cas 64—2AM) Y_|_sos T258 2o2 |_650 2 |_si8 7a.t2 |_21.00 65.0 10154— LTEFDD (SC—FDMA, 50% RB, 10 MHiz, x 241 oo 1734 000 1500 £96% cas arsk) YJ oar orzo i 1500 2 243 rass 1815 150.0 T0155— LTE—FDD (SG—FDMA, 50% RB, 10 MHz, X 271 bas2 fero 000 1500 £96% cas 16—0AM) y zsr 6700 1545 1500 2|21 Tizs 1744 150.0 10186— |LTEFDD(SCFDMA,50%RB,SMHz, x 204 7140 1681 0.00 1500 £96% cas arsk) y 149 se20 1364 150.0 z 219 Tasr 1742 150.0 10157— LTE—FDD (SC—FDMA, 50% RB, 5 MHz, X 220 66.64 14.96 0.00 1500 £96% cas 16—0A0) y—| 17e saos iz 1500 2 200 ss6e_| 14.00 150.0 f01s8— LTE—FDD(SGFDMA.50% RB, f0MHz, X 286 ead4 1690 000 1500 £96% cag 64—0AM) y 252 er2r 1537 150.0 Z2 292 7136 1754 150.0 i0159— |LTEFDD(SCFDMA,50% RB,5MHz, x 233 6914 1525 0.00 1500 £96% cag 64—0AM) y aa1 6536 1263 1500 z 212 917 1428 150.0 10160 LTEFDD(GCFDMA,5O%RB, foMHz, x 284 ea74 16990 000 1500 +96% cae arsk) y z81 er51_| 1549 150.0 2| 283 mor 1762 150.0 foie1— |LTEFDD(SCFDMA, 5O%RB, toMHz, x 297 6e07 1633 000 1500 £96% cae 16—0AM) y2i m 6624 1514 1500 2 280 s893 1666 150.0 10162— LTE—FDD (SC—FDMA, 50% RB, 15 MHz, x 3.08 sa22 f644 000 1500 £96% cae 64—0AM) y 282 seed 1529 1500 z 30 69.16 |_16.80 150.0 10166— LTE—FDD (SC—FDMA, 50% RB, 14 MHz, x 3.55 Toos 1948 301 1500 £96% Car arsi) y 332 sa75 1872 1500 z s4s ie 2061 150.0 T0167— LTEFDD(SCFDMA, SO%RE. 14MHz, X 443 7347 2043 301 1500 #96% car 16—0AM) y 3e T18 1897 1500 z 473 Tra2 2213 150.0 Certificate No: EX3—7350_Dec18 Page 17 of 39

EXGDV4— SN:7350 December 14, 2018 10168— LTE—FDD (SC—FDMA, 50% RB, 1.4 MHz, x 4.98 76.00 | 2156 3.01 150.0 +9.0 % CaAr 64—0AM) y 436 Tasr zo1 150.0 2 587 8219 2447 150.0 10169— LTE—FDD (SG—FDMA, 1 RB, 20 MHz, x 29 6945 1929 301 1500 £96% cae arsi) y zes erse 1810 1500 z 287 fose 2045 150.0 10170— LTE—FDD (SC—FDMA, 1 RB, 20 MHz, X 415 Te4s 2205 301 t500 £96% cae 16—0AM) y 344 72ze 2010 150.0 Z s29 8408 25.60 150.0 Tor71— LTE—FDD (SC—FOMA, 1 R&, 20 MHz, X 335 miea ioi3 301 1500 £96% AAE 64—0AM) y zse sa60_| i744 150.0 2 _s6s 7502 2118 150.0 10172— LTE—TOD (GG—FOMA, 1 RB, 20 MHz, X 1047 10040 3283 602 650 £96% cas arsk) y 437 si24 257 650 z 512 sose_| 2o0s 650 10173— LTE—TOD (SC—FOMA, 1 RB, 20 MHz, X a447 i2291 se7i 602 650 196% cas 16—0AM) y 920 ssor Peor 650 2z 100.00 144.73 4267 65.0 Tor73— LTE—TDD (GC—FDNA, 1 RB, 20 MHz, X 2ear magi sa32 602 650 £96% cas 64—0AM) y 68e sosi 2538 650 2 4228 12569 3727 65.0 To175— LTEFDD (GC—FDNA, 1 RB, 10 MHiz, X 28e se1s to0s 401 1500 +96% cas arsk) y 256 |_er12 1787 150.0 z 283 rose 2045 150.0 10176— LTE—FDD (GC—FDMA, 1 RB, 10 MHz, X 445 Teas 2207 a01 1500 £96% cas 16—0AM) y 344 7aze 201 150.0 z s81 8412 2561 150.0 10177— LTEFDD (SC—FDMA, 1 RB, 5 MHz, x 290 sa2e i91s 301 1500 £96% cal arsk) y 268 6725 1795 150.0 z 285 |_rore 2025 150.0 10178— LTE—FDD (GC—FDMA,1 RB, 5 MHz, 16— x 411 Teze 2198 301 1500 £96% cas QAM) y 342 7211 2oo 1500 z 523 8380 2547 150.0 10179 LTEFDD (SC—FDVA, 1 RB, 10 MHz, X a72 yaii 2047 301 1500 196% cas 64—0AM) Y 313 Tos 1863 1500 z 4ss resi_| 2324 150.0 foi80— |LTEFDD{SCFDMA. 1RE, SMHz 64— x 334 7187 1908 301 1500 £96% cas cam) Y 28e sass 1740 1500 z se« os 2113 150.0 10181— LTEFDD (GC—FDVA, 1 RB, 15 MHz, X 2oo se28 fois 301 is00 £96% cae arsi) y 27 6723 i7ga 1500 z 285 yors 2024 150.0 10182— LTEFDD (GC—FDMA,1 RB, 15 MHiz, x 4n Tera 2194 301 1500 £96% cae 16—0aM) Y 341 7209 _|_20.00 150.0 2 s22 sars 2545 150.0 10183 LTE—FDD (SC—FDNMA, 1 RB, 15 MHz, X s3 Time foo7 301 1500 £96% AAD 64—0AM) y 2sr sass irse 1500 2z ses 7eso 2111 150.0 Certificate No: EX3—7350_Dec18 Page 18 of 39

EX3DVA— SN:7350 December 14, 2018 10184— LTE—FDD (SC—FDMA, 1 RB, 3 MHz, x 2.91 69.32 19.15 3.01 150.0 +9.6 % cae arsig y zes erar irge 1500 z 286 |_7ore 2026 150.0 T015 |LTEFDD(SCFDMA, TRE, aMHz, 16. X 443 yes2 2198 301 1500 £96% cae QAM) y 345 7216 2ood 1500 Z 52e ss89 2551 150.0 Toig6— |LTEFDD(GCFDMA, TRE, 3MHz, 64— X ass ri92 1811 301 1500 £96% Ane qau) y 28e saso 1742 1500 z 366| Teot 2116 150.0 10187 LTEFDD (GC—FOMA, 1 RB, 1.4 MHz, X 2o2 cose jg22 301 1500 +90% car arsiq y zes orss i8os 1500 2 287 7ose 2036 150.0 10188— LTEFDD (SC—FOMA, 1 RB, 1.4 MHz, x 427 roae 2237 am is00 #96% CaAr 16—0A) Y—| 352 7272 2ose 150.0 2 557 6617 210 150.0 10189 LTEFDD (SC—FOMA, 1 RB, 14 MHz, X a4s 7ase fo40 401 1500 296% AAF 64—0AM) y 2oa sae5 ires 150.0 z |_s79 7ees 2156 150.0 10193— IEEE 802.11n (HT Greenfield, 6.5 Mops, X 4.51 be8r 1634 000 1500 £96% cac. sesi) y 437 seze iss 1500 2 437 sr2r 1649 150.0 10194 IEEE8O21in(HT Greenfeld, 39 Mbps, X 468 67.17 1646 000 1500 £96% ‘cac 16—0am) % y |_as2 cose is90 1500 2 &8 era9 16.62 150.0 10195— IEEEBOZ.1in(HT Greenfield, 65 Mbps, X 4.72 6720 1648 0.00 1500 £96% cac 64—0AM) y ase sese 1601 1500 z 4s sr50 1662 150.0 10196— IEEE 802.11n (HT Mixed, 6.5 Mops, xX asi beos i6.3s 000 is00 196 % cac Brsk) Y 436 6620 1586 150.0 z 436 er2r 1648 150.0 10197— IEEE8O2.1in(HTMixed, 39Mbps, 16— X 469 e7.19 1647 0.00 1500 £96% cac QAM) y 4s sase 1600 1500 z 452 e749 1662 150.0 10198— IEEE 802.1in (HT Mixed, 6a Mops, 64— X 4172 6722 1649 000 1500 296% cac QAM) y 456 _|_sese 1602 150.0 z 4ss 6749 1663 150.0 10219— IEEE 802.11n (HT Mixed, 7.2 Mbops, x 446 sees 1632 000 1500 +96% cac sPsk) y a@m es 1581 1500 z im 6733 16.46 150.0 10220— IEEEBO2.1in (HTMixed, 433 Mbps, 16— X 469 e7.16 1646 0.00 1500 196 % cac QAM) y 453 ses2 159 1500 z s e7as i6.61 150.0 10221— IEEEBOZ.1in(HTMixed, 722Mbps, 64— X 4.73 6714 1647 000 1500 £96% cac aaM) y 487 sass feo 1500 2 as5 er43 1661 150.0 10222— TEEE 802.11n (HT Mixed, 15 Mops, X So6 erze i6se 000 1500 +96% cac srsi) y ass |_sen 166 1500 2 49 6742 16.70 150.0 Certificate No: EX3—7350_Dec18 Page 19 of 39


Document Created: 2019-10-21 08:36:34
Document Modified: 2019-10-21 08:36:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC