letter modular approval

FCC ID: 2AKQD-M2600

Cover Letter(s)

Download: PDF

FCCID_3503042

Modular approval Declaration letter
We ，Shenzhen RodinBell Technology Co., Ltd. apply modular approval for
Product Name: M-2600 UHF RFID Single Port Module
Model: M-2600
FCC ID: 2AKQD-M2600
According to 996369 D01 Module Equip Auth Guide v01r04 and 15.212requirements:

1) The radio elements must have the radio frequency circuitry shielded. Physical
components and tuning capacitor(s) may be located external to the shield, but must
beon the module assembly;
Answer; Yes, All the main radio frequency circuitry and components are shielded.

2)The module must have buffered modulation/data inputs to ensure that the device
will comply with Part 15 requirements with any type of input signal;
Answer ：Yes, All inputs to the modules are buffered through logic or microprocessor
inputs.

3) The modular transmitter must have its own power supply regulation.
Answer ：Yes, DC/DC converter is used for modular power supply regulation.

4) The module must contain a permanently attached antenna, or contain a unique
antenna connector, and be marketed and operated only with specific antenna(s), per
Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b);
Answer ：Yes. Device is equipped with unique non-standard antenna connector and
the recommended specific antenna by the manufacture, the detail can refer user
manual.

(5)The module must demonstrate compliance in a stand-alone configuration;
Answer ：Yes，the module have a regular hardware and firmware configuration to
demonstrate the compliance.

(6) The module must be labelled with its permanently affixed FCC ID label, or use an
electronic display (See KDB Publication 784748 about labelling requirements);
Answer ：Yes. The modular has a permanent fixed label, and below statement was
listed in the User Manual;

(7)The module must comply with all specific rules applicable to the transmitter
including all the conditions provided in the integration instructions by the grantee;
Answer ：Yes ,The module comply with all specific rules applicable to the transmitter
including all the conditions provided in the integration instructions by the grantee,
Refer to test report and user manual .

Document Created: 2017-08-09 08:53:22
Document Modified: 2017-08-09 08:53:22

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC