Test Report_JBP

FCC ID: 2AKLNG20A1

Test Report

Download: PDF
FCCID_3311530

ORLAB! REPORT No. : SZ16120062E02 _ FCC TEST REPORT APPLICANT Beijing LLVision Technology Co., Itd PRODUCT NAME Smart Glass Host MODEL NAME GLXSS Pro TRADE NAME GLXSS BRAND NAME GLXSS STANDARD(S) 47 CFR Part 15 Subpart B TEST DATE 2017—01—20 to 2017—02—06 ISSUE DATE 2017—02—07 SHENZHEN MORLAB C @ECHNOLOGY Co., Ltd. NOTE: This document is issued by MORLAB, the test report shall not be—reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. FL1—3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86—755—36698555 Fax: 86—755—36698525 MORLAB GROU P Blocké7, BacAn ‘Distric(, ShenZhen , G,uar;gDong Province, P. R. China Hittp:/Awww.morlab.cn E—mail: service@morlab.cn

REPORT No.：SZ16120062E02 DIRECTORY 1. TECHNICAL INFORMATION∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙5 1.1. APPLICANT INFORMATION ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙5 1.2. EQUIPMENT UNDER TEST (EUT) DESCRIPTION∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙5 2. TEST RESULTS ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙6 2.1. APPLIED REFERENCE DOCUMENTS ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙6 3. TEST CONDITIONS SETTING ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙7 3.1. TEST MODE ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙7 3.2. TEST SETUP AND EQUIPMENTS LIST∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙8 3.2.1. CONDUCTED EMISSION ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙8 3.2.2. RADIATED EMISSION ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙9 4. 47 CFR PART 15B REQUIREMENTS ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 11 4.1. CONDUCTED EMISSION ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙11 4.1.1. REQUIREMENT ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 11 4.1.2. TEST DESCRIPTION ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 11 4.1.3. TEST RESULT ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 11 4.2. RADIATED EMISSION ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙14 4.2.1. REQUIREMENT ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 14 4.2.2. TEST DESCRIPTION ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 14 4.2.3. FREQUENCY RANGE OF MEASUREMENT ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 15 4.2.4. TEST RESULT ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 15 ANNEX A TEST SETUP PHOTOS ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙18 1. MAINS TERMINAL DISTURBANCE VOLTAGE MEASUREMENT ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙18 2. CONDUCTED EMISSION MAIN’S PORT SIDE VIEW ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 18 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 2 0f 21

REPORT No.：SZ16120062E02 3. RADIATED EMISSION (30MHZ-1GHZ) ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 19 4. RADIATED EMISSION (ABOVE 1GHZ) ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 19 ANNEX B TEST UNCERTAINTY ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙20 ANNEX C TESTING LABORATORY INFORMATION ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 21 1. IDENTIFICATION OF THE RESPONSIBLE TESTING LABORATORY ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙21 2. IDENTIFICATION OF THE RESPONSIBLE TESTING LOCATION ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙21 3. ACCREDITATION CERTIFICATE ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙21 4. TEST ENVIRONMENT CONDITIONS ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙21 Change History Issue Date Reason for change 1.0 2017-02-07 First edition FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 3 0f 21

ORLAB: REPORT No. : SZ16120062E02 wW Test Report Declaration Applicant Beijing LLVision Technology Co., Itd Room903, Unit A, The Spaces International Center, No.8 ApplicantAddress Dongdagiao Road, Chaoyang District, Beijing, P.R. China Manufacturer Huizhou BYD Electronic Company Limited Mianutactdfer Addrets filua;fi :l:“(j;iuii,\:;;(I;):ga Bay Economic Development Zone Product Name Smart Glass Host Model Name GLXSS Pro Brand Name GLXSS HW Version B2 SW Version G20A_V0O3.1201 Test Standards 47 CFR Part 15 Subpart B * Test Result PasS Tested by : M/V\ 21/\?)"/("1\/\/?/*’\ Wu Zhongwen (Test Engineer) Reviewed by _: Xiao Xiong Xiao Xiong (EM& Manager) Approved by _: M 3’&&\/ U Andy Yeh (Technology Manager) M o RLAB G Ro U P FL1—3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86—755—36698555 Fax: 86—755—36698525 Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Hittp:/Awww.morlab.cn E—mail: service@morlab.cn Page 4 Of 21

REPORT No.：SZ16120062E02 1. Technical Information Note： Provided by applicant 1.1. Applicant Information Company： Beijing LLVision Technology Co., ltd Address： Room903, Unit A, The Spaces International Center, No.8 Dongdaqiao Road, Chaoyang District, Beijing, P.R. China 1.2. Equipment under Test (EUT) Description EUT Type: Smart Glass Host Serial No: (N/A, marked #1 by test site) Hardware Version: B2 Software Version: G20A_V03.1201 Power supply: Battery Brand Name: GLXSS Model No.: B18650-2 Serial No.: (N/A, marked #1 by test site) Capacity: 5800mAh Normal Voltage: 3.7V Charge Limit: 4.35V Ancillary Equipment: AC Adapter (Charger for Battery) Brand Name: GLXSS Model No.: TUUS050200-L00 Serial No.: (N/A, marked #1 by test site) Rated Input: 100-240V, 50/60Hz, 500mA Rated Output: 5.0V 2A NOTE: 1. The EUT is a Smart Glass Host which supports 5.8G SRD, ISM 2.4GHz Bluetooth band, WIFI (802.11a/b/g/n) band and GPS. 2. The EUT is equipped with a Type-C port which can be connected to ancillary equipments. 3. For a more detailed description, please refer to specification or user’s manual supplied by the applicant and/or manufacturer. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 5 0f 21

REPORT No.：SZ16120062E02 2. Test Results 2.1. Applied Reference Documents The objective of the report is to perform testing according to 47 CFR Part 15 Subpart B: No. Identity Document Title 1 47 CFR Part 15 Radio Frequency Devices Test detailed items/section required by FCC rules and results are as below: No. Section Description Test Date Result 1 15.107 Conducted Emission 2017.01.23 PASS 2 15.109 Radiated Emission 2017.01.23 PASS NOTE: The tests were performed according to the method of measurements prescribed in ANSI C63.4-2014. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 6 0f 21

REPORT No.：SZ16120062E02 3. Test Conditions Setting 3.1. Test Mode 1 The first test mode The EUT configuration of the emission tests is EUT + Battery + PC. During the measurement, the EUT was connected to a PC via the Type-C port and the EUT was charged by the PC. During the measurement, the data is transmitting between the PC and the EUT. 2 The second test mode The EUT configuration of the emission tests is EUT + Battery + Adapter. During the measurement, the EUT was connected with the Adapter via the Type-C port and kept charging by the Adapter, meanwhile, it was kept rated output and working normally. 3 The third test mode The EUT configuration of the emission tests is EUT + Battery + Smart glasses. Before the test, the EUT was charged fully. During the measurement, the EUT was connected with the Smart glasses, meanwhile, it was kept rated output and working normally. Note: All the test modes were performed, only the worst case (the first) was recorded in the report. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 7 0f 21

REPORT No.：SZ16120062E02 3.2. Test Setup and Equipments List 3.2.1. Conducted Emission A. Test Setup: The EUT is placed on a 0.8m high insulating table, which stands on the grounded conducting floor, and keeps 0.4m away from the grounded conducting wall. The EUT is connected to the power mains through a LISN which provides 50Ω/50µH of coupling impedance for the measuring instrument. A Pulse Limiter is used to protect the measuring instrument. The factors of the whole test system are calibrated to correct the reading. The power strip or extension cord has been investigated to make sure that the LISN integrity in maintained with respect to the impedance characteristics as prescribed in ANSI C63.4-2014 at Clause 4.3. B. Equipments List: Description Manufacturer Model Serial No. Cal. Date Due. Date Receiver Narda PMM 9010 595WX11007 2016.06.02 2017.06.01 LISN Schwarzbeck NSLK 8127 812744 2016.06.02 2017.06.01 Pulse Limiter VTSD 9561D 9537 2016.07.05 2017.07.04 (20dB) FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 8 0f 21

REPORT No.：SZ16120062E02 3.2.2. Radiated Emission A. Test Setup: 1. For radiated emissions from 30MHz to1GHz 2. For radiated emissions above 1GHz The test is performed in a 3m Semi-Anechoic Chamber; the antenna factor, cable loss and so on of FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 9 0f 21

REPORT No.：SZ16120062E02 the site (factors) is calculated to correct the reading. The EUT is placed on a 0.8m high insulating Turn Table, and keeps 3m away from the Test Antenna, which is mounted on a variable-height antenna master tower. For the test Antenna: In the frequency range above 30MHz, Bi-Log Test Antenna (30MHz to 1GHz) and Horn Test Antenna (above 1GHz) are used. Test Antenna is 3m away from the EUT. Test Antenna height is varied from 1m to 4m above the ground to determine the maximum value of the field strength. The emission levels at both horizontal and vertical polarizations should be tested. B. Equipments List: Description Manufacturer Model Serial No. Cal. Date Due. Date MXE EMI Receiver Agilent N9038A MY54130016 2016.06.03 2017.06.02 Semi-Anechoic Changning 9m*6m*6m N/A 2016.03.25 2017.03.24 Chamber Test Antenna - Bi-Log Schwarzbeck VULB 9163 9163-274 2016.12.09 2017.12.08 Test Antenna - Horn Schwarzbeck BBHA9120C 9120C-384 2016.07.05 2017.07.04 18-26.5GHz MA03 TS-PR18 Rohde&Schwarz 2016.03.02 2017.03.01 pre-Amplifier 26.5-40GHz NSP4000-SP C00990 Miteq 2016.03.02 2017.03.01 pre-Amplifier 2 FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 10 0f 21

REPORT No.：SZ16120062E02 4. 47 CFR Part 15B Requirements 4.1. Conducted Emission 4.1.1. Requirement According to FCC section 15.107, the radio frequency voltage that is conducted back onto the AC power line on any frequency within the band 150kHz to 30MHz shall not exceed the limits in the following table, as measured using a 50µH/50Ω line impedance stabilization network (LISN). Frequency range Conducted Limit (dBµV) (MHz) Quasi-peak Average 0.15 - 0.50 66 to 56 56 to 46 0.50 - 5 56 46 5 - 30 60 50 NOTE: a) The limit subjects to the Class B digital device. b) The lower limit shall apply at the band edges. c) The limit decreases linearly with the logarithm of the frequency in the range 0.15 - 0.50MHz. 4.1.2. Test Description See section 3.2.1 of this report. 4.1.3. Test Result The maximum conducted interference is searched using Peak (PK), Quasi-peak (QP) and Average (AV) detectors; the emission levels more than the AV and QP limits, and that have narrow margins from the AV and QP limits will be re-measured with AV and QP detectors. Tests for both L phase and N phase lines of the power mains connected to the EUT are performed. All test modes are considered, refer to recorded points and plots below. A. Test Plot and Suspicious Points: FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 11 0f 21

REPORT No.：SZ16120062E02 (Plot A: L Phase) Fre. Emission Level (dBµV) Limit (dBµV) No. Power-line Verdict (MHz) Quai-peak Average Quai-peak Average 1 0.15 51.68 30.48 66.00 56.00 PASS 2 0.265 44.93 32.08 62.71 52.71 PASS 3 0.58 42.94 30.93 56.00 46.00 PASS Line 4 1.66 43.96 28.92 56.00 46.00 PASS 5 2.68 40.81 28.55 56.00 46.00 PASS 6 4.525 38.81 27.00 56.00 46.00 PASS FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 12 0f 21

REPORT No.：SZ16120062E02 (Plot B: N Phase) Fre. Emission Level (dBµV) Limit (dBµV) No. Power-line Verdict (MHz) Quai-peak Average Quai-peak Average 1 0.165 52.07 32.79 65.57 55.57 PASS 2 0.22 45.96 32.53 64.00 54.00 PASS 3 0.60 42.33 31.02 56.00 46.00 PASS Neutral 4 1.225 43.01 35.24 56.00 46.00 PASS 5 1.65 44.37 38.16 56.00 46.00 PASS 6 3.02 41.99 33.97 56.00 46.00 PASS Result: Pass FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 13 0f 21

REPORT No.：SZ16120062E02 4.2. Radiated Emission 4.2.1. Requirement According to FCC section 15.109 (a), the field strength of radiated emissions from unintentional radiators at a distance of 3 meters shall not exceed the following values: Frequency Field Strength Limitation at 3m Measurement Dist range (MHz) (µV/m) (dBµV/m) 30.0 - 88.0 100 20log 100 88.0 - 216.0 150 20log 150 216.0 - 960.0 200 20log 200 Above 960.0 500 20log 500 As shown in FCC section 15.35 (b), for frequencies above 1000MHz, the field strength limits are based on average detector. When average radiated emission measurements are specified in this part, including emission measurements below 1000MHz, there also is a limit on the radio frequency emissions, as measured using instrumentation with a peak detector function, corresponding to 20dB above the maximum permitted average limit for the frequency being investigated unless a different peak emission limit is otherwise specified in the rules. Note: 1) The tighter limit shall apply at the boundary between two frequency range. 2) Limitation expressed in dBµV/m is calculated by 20log Emission Level (µV/m). 3) If measurement is made at 3m distance, then F.S Limitation at 3m distance is adjusted by using the formula of Ld1 = Ld2 * (d2/d1)2. Example: F.S Limit at 30m distance is 30µV/m, then F.S Limitation at 3m distance is adjusted as Ld1 = L1 = 30µV/m * (10)2 = 100 * 30µV/m 4.2.2. Test Description See section 3.2.2 of this report. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 14 0f 21

REPORT No.：SZ16120062E02 4.2.3. Frequency range of measurement According to 15.33(b) (1), the frequency range of radiated measurement for the EUT is listed in the following table: 4.2.4. Test Result The maximum radiated emission is searched using PK, QP and AV detectors; the emission levels more than the limits, and that have narrow margins from the limits will be re-measured with AV and QP detectors. Both the vertical and the horizontal polarizations of the Test Antenna are considered to perform the tests. All test modes are considered, refer to recorded points and plots below. The amplitude of emissions (6GHz-30GHz) which are attenuated more than 20 dB below the permissible value need not be reported. Note: All radiated emission tests were performed in X, Y, Z axis direction, and only the worst axis test condition was recorded in this test report. A. Test Plots and Suspicious Points: FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 15 0f 21

REPORT No.：SZ16120062E02 (Plot A: 30MHz – 6GHz, Test Antenna Vertical) No. Fre. Pk QP AV Limit-PK Limit-QP Limit-AV ANT Verdict MHz dBµV/m dBµV/m dBµV/m dBµV/m dBµV/m dBµV/m 1 30.970 N.A. 37.69 N.A. N.A. 40.00 N.A. V PASS 2 172.590 N.A. 24.13 N.A. N.A. 43.50 N.A. V PASS 3 470.380 N.A. 25.49 N.A. N.A. 46.00 N.A. V PASS 4 1452.267 40.31 N.A. 34.33 74.00 N.A. 54.00 V PASS 5 2838.080 45.28 N.A. 39.07 74.00 N.A. 54.00 V PASS 6 5632.320 47.71 N.A. 41.24 74.00 N.A. 54.00 V PASS FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 16 0f 21

REPORT No.：SZ16120062E02 (Plot B: 30MHz – 6GHz, Test Antenna Horizontal) No. Fre. Pk QP AV Limit-PK Limit-QP Limit-AV ANT Verdict MHz dBµV/m dBµV/m dBµV/m dBµV/m dBµV/m dBµV/m 1 49.400 N.A. 19.85 N.A. N.A. 40.00 N.A. H PASS 2 169.680 N.A. 23.48 N.A. N.A. 43.50 N.A. H PASS 3 283.170 N.A. 29.14 N.A. N.A. 46.00 N.A. H PASS 4 1280.000 40.12 N.A. 34.08 74.00 N.A. 54.00 H PASS 5 2784.320 45.80 N.A. 39.64 74.00 N.A. 54.00 H PASS 6 4539.200 46.56 N.A. 40.15 74.00 N.A. 54.00 H PASS Result: Pass FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 17 0f 21

REPORT No.：SZ16120062E02 Annex A Test Setup photos 1. Mains Terminal Disturbance Voltage Measurement 2. Conducted emission main’s port side view FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 18 0f 21

REPORT No.：SZ16120062E02 3. Radiated emission (30MHz-1GHz) 4. Radiated emission (Above 1GHz) FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 19 0f 21

REPORT No.：SZ16120062E02 Annex B Test Uncertainty The uncertainty is calculated using the methods suggested in the "Guide to the Expression of Uncertainty in Measurement" (GUM) published by ISO. Uncertainty of Conducted Emission: ±1.8dB Uncertainty of Radiated Emission: ±3.1dB FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 20 0f 21

REPORT No.：SZ16120062E02 Annex C Testing Laboratory Information 1. Identification of the Responsible Testing Laboratory Company Name: Shenzhen Morlab Communications Technology Co., Ltd. Department: Morlab Laboratory Address: FL.3, Building A, FeiYang Science Park, No.8 LongChang Road, Block 67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Responsible Test Lab Manager: Mr. Su Feng Telephone: +86 755 36698555 Facsimile: +86 755 36698525 2. Identification of the Responsible Testing Location Name: Shenzhen Morlab Communications Technology Co., Ltd. Morlab Laboratory Address: FL.3, Building A, FeiYang Science Park, No.8 LongChang Road, Block 67, BaoAn District, ShenZhen, GuangDong Province, P. R. China 3. Accreditation Certificate Accredited Testing Laboratory: The FCC registration number is 695796. (Shenzhen Morlab Communications Technology Co., Ltd.) 4. Test Environment Conditions During the measurement, the environmental conditions were within the listed ranges: Temperature (°C): 15 - 35 Relative Humidity (%): 30 - 60 Atmospheric Pressure (kPa): 86 - 106 ***** END OF REPORT ***** FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Tel: 86-755-36698555 Fax: 86-755-36698525 M ORLAB GROU P Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn Page 21 0f 21


Document Created: 2017-12-25 12:31:34
Document Modified: 2017-12-25 12:31:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC