MPE report

FCC ID: 2AKIT-AS013

RF Exposure Info

Download: PDF
FCCID_4404883

CTC Laboratories, Inc. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel: +86-755- 27521059 Fax: +86-755- 27521011 Http://www.sz-ctc.com.cn Maximum Permissible Exposure Evaluation FCC ID: 2AKIT- AS013 According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) Radiation as specified in §1.1307(b) EUT Specification EUT Weather Sensor T1 Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Others (Zigbee 2405MHz ~ 2480MHz) Device category Portable (<20cm separation) Mobile (>20cm separation) fixed (>20cm separation) Others ___ Exposure classification Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm2) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power 10.35dBm Antenna gain (Max) 2dBi Evaluation applied MPE Evaluation SAR Evaluation Limits for Maximum Permissible Exposure (MPE) Frequency Electric Field Magnetic Field Power Average Range(MHz) Strength(V/m) Strength(A/m) Density(mW/cm2) Time (A) Limits for Occupational/Control Exposures 300-1500 -- -- F/300 6 1500-100000 -- -- 5 6 (B) Limits for General Population/Uncontrol Exposures 300-1500 -- -- F/1500 6 1500-100000 -- -- 1 30 CTC Laboratories, Inc. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn

Page 2 of 2 Report No.: GTI20190660F-1 Friis transmission formula: Pd=(Pout*G)\(4*pi*R2) Where Pd= Power density in mW/cm2 Pout=output power to antenna in Mw G= gain of antenna in linear scale Pi=3.1416 R= distance between observation point and center of the radiator in cm Pd the limit of MPE 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Measurement Result Max. Power Power Channel Tune up Max. Tune up Antenna Measured density at density frequency tolerance Power Gain Power 20cm Limits (MHz) (dBm) (dBm) (dBi) (dBm) (mW/cm2 ) (mW/cm2 ) 2405 10.35 11±1 12 2 0.00500 1 2440 10.29 11±1 12 2 0.00500 1 2480 0.17 1±1 2 2 0.00050 1 Note For a more detailed features description, please refer to the RF Test Report. **********************THE END********************** CTC Laboratories, Inc. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel.: (86)755-27521059 Fax: (86)755-27521011 Http://www.sz-ctc.org.cn For anti-fake verification, please visit the official website of Certification and Accreditation Administration of the People’s Republic of China : yz.cncaic.cn


Document Created: 2019-08-14 10:34:26
Document Modified: 2019-08-14 10:34:26
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC