14_GN-EW002-999 TestRpt

FCC ID: 2AKG3GNEW002999

Test Report

Download: PDF
FCCID_4048350

Page 1 of 22 FCC TEST REPORT Test report On Behalf of Shenzhen JBT Smart Lighting Co.,LTD For LED STRIP Model No.: GN-EW002-999, GNU-EW002-999, GNC-EW002-999, GNC-EW002-999, MI-EW003-999W, GN-EW002-999, MI-EW003-999W, 837004, 837003 FCC ID: 2AKG3GNEW002999 Prepared for : Shenzhen JBT Smart Lighting Co.,LTD No.7 Building,No.1 Furong Road,Furong Industrial Park,Shajing Town,Baoan District,Shenzhen City China. Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1F, B2 Building, Junfeng Zhongcheng Zhizao Innovation Park, Fuhai Street, Bao'an District, Shenzhen City, China Date of Test: Aug.30, 2018 ~ Sep.03, 2018 Date of Report: Sep.04, 2018 Report Number: HUAK180905986E

Report No.: HUAK180905986E Page 2 of 22 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY .......................................................................................................3 2. SYSTEM DESCRIPTION .......................................................................................................................4 3. MEASUREMENT UNCERTAINTY .........................................................................................................4 4. PRODUCT INFORMATION ....................................................................................................................5 5. SUPPORT EQUIPMENT ........................................................................................................................6 6. TEST FACILITY .....................................................................................................................................7 7. FCC LINE CONDUCTED EMISSION TEST ..........................................................................................8 7.1. LIMITS OF LINE CONDUCTED EMISSION TEST...........................................................................8 7.2. BLOCK DIAGRAM OF TEST SETUP ..............................................................................................8 7.3. PROCEDURE OF LINE CONDUCTED EMISSION TEST ...............................................................9 7.4. TEST RESULT OF LINE CONDUCTED EMISSION TEST ............................................................10 8. FCC RADIATED EMISSION TEST ......................................................................................................12 8.1. LIMITS OF RADIATED EMISSION TEST ......................................................................................12 8.2. BLOCK DIAGRAM OF TEST SETUP ............................................................................................12 8.3. PROCEDURE OF RADIATED EMISSION TEST ...........................................................................13 8.4. TEST RESULT OF RADIATED EMISSION TEST ..........................................................................14 APPENDIX A: PHOTOGRAPHS OF TEST SETUP ................................................................................16 APPENDIX B: PHOTOGRAPHS OF EUT ...............................................................................................17

Report No.: HUAK180905986E Page 3 of 22 1. VERIFICATION OF CONFORMITY Applicant Shenzhen JBT Smart Lighting Co., LTD No.7 Building, No.1 Furong Road, Furong Industrial Park, Shajing Town, Address Baoan District, Shenzhen City China. Manufacturer Shenzhen JBT Smart Lighting Co., LTD No.7 Building, No.1 Furong Road, Furong Industrial Park, Shajing Town, Address Baoan District, Shenzhen City China. Product Designation LED STRIP Brand Name N/A Test Model GN-EW002-999 GNU-EW002-999, GNC-EW002-999, GNC-EW002-999, MI-EW003-999W, Series Models GN-EW002-999, MI-EW003-999W, 837004, 837003 Model Difference All the same except from the model name. Measurement Procedure ANSI C63.4: 2014 Date of test Aug.30, 2018 to Sep.03, 2018 Deviation None Condition of Test Normal Sample Test Result Pass Report Template AGCRT-US-IT/AC(2013-03-01) The above equipment was tested by Shenzhen HUAK Testing Technology Co., Ltd. for compliance with the requirements set forth in the FCC Rules and Regulations Part 15, the measurement procedure according to ANSI C63.4:2014. This said equipment in the configuration described in this report shows the maximum emission levels emanating from equipment are within the compliance requirements. The test results of this report relate only to the tested sample identified in this report. Testing Engineer : (Gary Qian) Technical Manager : (Eden Hu) Authorized Signatory : (Jason Zhou)

Report No.: HUAK180905986E Page 4 of 22 2. SYSTEM DESCRIPTION TEST MODE DESCRIPTION NO. TEST MODE DESCRIPTION WORST 1 Light on mode V Note:1. V means EMI worst mode. 3. MEASUREMENT UNCERTAINTY The uncertainty is calculated using the methods suggested in the “Guide to the Expression of Uncertainty in measurement” (GUM) published by CISPR and ANSI. - Uncertainty of Radiated Conducted Emission, Uc = ±2.56 dB - Uncertainty of Radiated Emission Below 1G, Uc = ±3.92 dB - Uncertainty of Radiated Emission Above 1G, Uc = ±4.28 dB

Report No.: HUAK180905986E Page 5 of 22 4. PRODUCT INFORMATION Housing Type Plastic and metal Hardware Version TYWE3S Software Version 3.3.1 FCC ID 2AKG3GNEW002999 Adapter Model JK120100-S37USVD Adapter Input Rating AC 100-240V 50/60Hz 0.5A Adapter Output Rating DC 12V 1000mA I/O Port Information ( Applicable Not Applicable) I/O Port of EUT I/O Port Type Number Cable Description Tested With DC Input port 1 1.50m Unshielded 1 6 pin port 1 0.10m Unshielded 1

Report No.: HUAK180905986E Page 6 of 22 5. SUPPORT EQUIPMENT Device Type Manufacturer Model Name Serial No. Data Cable Power Cable -- -- -- -- -- -- Note: 1.“-- “means no any support device during testing.

Report No.: HUAK180905986E Page 7 of 22 6. TEST FACILITY Site Shenzhen HUAK Testing Technology Co., Ltd. 1F, B2 Building, Junfeng Zhongcheng Zhizao Innovation Park, Fuhai Street, Location Bao'an District, Shenzhen City, China Designation Number CN1229 Test Firm 616276 Registration Number Cal. Item Equipment Manufacturer Model No. Serial No. Last Cal. Interval L.I.S.N. 1. Artificial Mains R&S ENV216 HKE-002 Dec. 28, 2017 1 Year Network 2. Receiver R&S ESCI 7 HKE-010 Dec. 28, 2017 1 Year RF automatic 3. Tonscend JS0806-2 HKE-060 Dec. 28, 2017 1 Year control unit 4. Spectrum analyzer R&S FSP40 HKE-025 Dec. 28, 2017 1 Year 5. Spectrum analyzer Agilent N9020A HKE-048 Dec. 28, 2017 1 Year 6. Preamplifier Schwarzbeck BBV 9743 HKE-006 Dec. 28, 2017 1 Year 7. EMI Test Receiver Rohde & Schwarz ESCI 7 HKE-010 Dec. 28, 2017 1 Year Bilog Broadband 8. Schwarzbeck VULB9163 HKE-012 Dec. 28, 2017 1 Year Antenna FMZB 1519 9. Loop Antenna Schwarzbeck HKE-014 Dec. 28, 2017 1 Year B 10. Horn Antenna Schewarzbeck 9120D HKE-013 Dec. 28, 2017 1 Year EMC051845 11. Pre-amplifier EMCI HKE-015 Dec. 28, 2017 1 Year SE 12. Pre-amplifier Agilent 83051A HKE-016 Dec. 28, 2017 1 Year EMI Test Software JS1120-B 13. Tonscend HKE-083 Dec. 28, 2017 N/A EZ-EMC Version 14. Power Sensor Agilent E9300A HKE-086 Dec. 28, 2017 1 Year 15. Spectrum analyzer Agilent N9020A HKE-048 Dec. 28, 2017 1 Year 16. Signal generator Agilent N5182A HKE-029 Dec. 28, 2017 1 Year 17. Signal Generator Agilent 83630A HKE-028 Dec. 28, 2017 1 Year 18. Shielded room Shiel Hong 4*3*3 HKE-039 Dec. 28, 2017 3 Year

Report No.: HUAK180905986E Page 8 of 22 7. FCC LINE CONDUCTED EMISSION TEST 7.1. LIMITS OF LINE CONDUCTED EMISSION TEST Maximum RF Line Voltage Frequency Q.P.( dBuV) Average( dBuV) 150kHz-500kHz 66-56 56-46 500kHz-5MHz 56 46 5MHz-30MHz 60 50 Note: 1. The lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50MHz. For unintentional device, according to § 15.107(a) Line Conducted Emission Limits is as following For intentional device, according to §15.207(a) Line Conducted Emission Limit is same as above table. 7.2. BLOCK DIAGRAM OF TEST SETUP

Report No.: HUAK180905986E Page 9 of 22 7.3. PROCEDURE OF LINE CONDUCTED EMISSION TEST (1) The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.4 (see Test Facility for the dimensions of the ground plane used). When the EUT is a floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. (2) Support equipment, if needed, was placed as per ANSI C63.4. (3) All I/O cables were positioned to simulate typical actual usage as per ANSI C63.4. (4) The EUT received DC12V power from adapter which received AC120V/60Hz power from a LISN. (5) The EUT test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. (6) Analyzer / Receiver scanned from 150 kHz to 30MHz for emissions in each of the test modes. (7) During the above scans, the emissions were maximized by cable manipulation. (8) A scan was taken on both power lines, Line 1 and Line 2, recording at least the six highest emissions. (9) Emission frequency and amplitude were recorded into a computer in which correction factors were used to calculate the emission level and compare reading to the applicable limit. If EUT emission level was less –2dB to the A.V. limit in Peak mode, then the emission signal was re-checked using Q.P and Average detector.

Report No.: HUAK180905986E Page 10 of 22 7.4. TEST RESULT OF LINE CONDUCTED EMISSION TEST LINE CONDUCTED EMISSION TEST-L RESULT: PASS

Report No.: HUAK180905986E Page 11 of 22 LINE CONDUCTED EMISSION TEST-N RESULT: PASS

Report No.: HUAK180905986E Page 12 of 22 8. FCC RADIATED EMISSION TEST 8.1. LIMITS OF RADIATED EMISSION TEST Frequency Distance Maximum Field Strength Limit (MHz) (m) (dBuV/m/ Q.P.) 30~88 3 40.0 88~216 3 43.5 216~960 3 46.0 Above 960 3 54.0 Note: The lower limit shall apply at the transition frequency. 8.2. BLOCK DIAGRAM OF TEST SETUP System Diagram of Connections between EUT and Simulators

Report No.: HUAK180905986E Page 13 of 22 8.3. PROCEDURE OF RADIATED EMISSION TEST (1) The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden turntable with a height of 0.8 meters is used which is placed on the ground plane as per ANSI C63.4 (see Test Facility for the dimensions of the ground plane used). When the EUT is floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. (2) Support equipment, if needed, was placed as per ANSI C63.4. (3) All I/O cables were positioned to simulate typical actual usage as per ANSI C63.4. (4) The EUT was turned on. All support equipments received AC120V/60Hz power from socket under the turntable, if any. (5) The antenna was placed at 3 meter away from the EUT as stated in FCC Part 15. The antenna connected to the Analyzer via a cable and at times a pre-amplifier would be used. (6) The Analyzer / Receiver quickly scanned from 30MHz to 1000MHz. The EUT test program was started. Emissions were scanned and measured rotating the EUT to 360 degrees and positioning the antenna 1 to 4 meters above the ground plane, in both the vertical and the horizontal polarization, to maximize the emission reading level. (7) The test mode(s) were scanned during the test: (8) Recorded at least the six highest emissions. Emission frequency, amplitude, antenna position, polarization and turntable position were recorded into a computer in which correction factors were used to calculate the emission level and compare reading to the applicable limit and Q.P./Peak reading is presented.

Report No.: HUAK180905986E Page 14 of 22 8.4. TEST RESULT OF RADIATED EMISSION TEST Radiated Emission Test at 3m Distance-Horizontal Factor Level Limit Frequency Reading Margin Height Angle Polarization dB dB(uV/m) dB(uV/m) Pass/Fail MHz dB(uV) dB cm deg (1/m) PK QP 45.520 H 6.4 17.3 23.7 40.0 16.3 Pass 150.0 23.9 61.525 H 7.2 16.0 23.2 40.0 16.8 Pass 150.0 23.9 149.310 H 11.3 16.6 27.9 43.5 15.6 Pass 150.0 142.3 185.685 H 13.9 14.0 27.9 43.5 15.6 Pass 150.0 334.8 256.010 H 12.3 16.0 28.3 46.0 17.7 Pass 150.0 20.6 364.165 H 9.9 19.5 29.4 46.0 16.6 Pass 150.0 20.6 RESULT: PASS

Report No.: HUAK180905986E Page 15 of 22 Radiated Emission Test at 3m Distance-Vertical Factor Level Limit Frequency Reading Margin Height Angle Polarization dB dB(uV/m) dB(uV/m) Pass/Fail MHz dB(uV) dB cm deg (1/m) PK QP 36.305 V 11.5 16.6 28.1 40.0 11.9 Pass 100.1 292.1 54.250 V 8.8 16.8 25.6 40.0 14.4 Pass 100.1 215.9 67.830 V 12.9 15.0 27.9 40.0 12.1 Pass 100.1 195.1 148.340 V 17.0 16.6 33.6 43.5 9.9 Pass 100.1 198.3 186.170 V 11.5 14.0 25.5 43.5 18.0 Pass 100.1 261.0 254.070 V 12.1 16.0 28.1 46.0 17.9 Pass 100.1 138.9 RESULT: PASS Note： Level(dBuV/m)=Reading(dBuV)+Factor(dB/m) Factor(dB/m)=Antenna Factor(dB/m)+Cable loss(dB)+Attenuation(dB)for Attenuator Margin= Limit -Level All Other modes above 1GHz have more than 20db margin, no recording in the report

Report No.: HUAK180905986E Page 16 of 22 APPENDIX A: PHOTOGRAPHS OF TEST SETUP FCC LINE CONDUCTED EMISSION TEST SETUP FCC RADIATED EMISSION TEST SETUP

Report No.: HUAK180905986E Page 17 of 22 APPENDIX B: PHOTOGRAPHS OF EUT ALL VIEW OF EUT TOP VIEW OF EUT

Report No.: HUAK180905986E Page 18 of 22 BOTTOM VIEW OF EUT FRONT VIEW OF EUT

Report No.: HUAK180905986E Page 19 of 22 BACK VIEW OF EUT LEFT VIEW OF EUT

Report No.: HUAK180905986E Page 20 of 22 RIGHT VIEW OF EUT OPEN VIEW OF EUT

Report No.: HUAK180905986E Page 21 of 22 INTERNAL VIEW OF EUT-1 INTERNAL VIEW OF EUT-2

Report No.: HUAK180905986E Page 22 of 22 INTERNAL VIEW OF EUT-3 ----END OF REPORT----


Document Created: 2018-10-18 16:08:13
Document Modified: 2018-10-18 16:08:13
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC