18_X13 RFExp r2

FCC ID: 2AKBP-X13

RF Exposure Info

Download: PDF
FCCID_4339278

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE166245 Page: 1 of 3 Maximum Permissible Exposure Evaluation FCC ID: 2AKBP-X13 1. Client Information Applicant : Shenzhen Hysiry Technology Co., Ltd. 2403d, 24th floor, coast huanqing building, no.24 futian road, xu town Address : community, futian street, futian district, shenzhen Manufacturer : Shenzhen Hysiry Technology Co., Ltd. 2403d, 24th floor, coast huanqing building, no.24 futian road, xu town Address : community, futian street, futian district, shenzhen 2. General Description of EUT EUT Name : Outdoor Smart Plug Models No. : X13 Model Different : N/A Operation 802.11b/g/n(HT20): 2412MHz~2462MHz Frequency: RF Output Power: 802.11b: 6.60dBm 802.11g: 4.26dBm Product 802.11n (HT20): 4.07dBm : Description Antenna Gain: 1.7dBi PCB Antenna Modulation Type: 802.11b: DSSS(CCK, DQPSK, DBPSK) 802.11g/n: OFDM(BPSK,QPSK,16QAM, 64QAM) Power Supply : AC Voltage supplied Input: AC 100-240V 50/60Hz 15A MAX Power Rating : Output: AC 100-240V 50/60Hz 15A MAX Software Version : N/A Hardware Version : N/A Connecting I/O : Please refer to the User's Manual Port(S) TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Report No.: TB-MPE166245 Page: 2 of 3 MPE Calculations for WIFI 1. Antenna Gain: PCB Antenna: 1.7dBi. 2. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 4. Test Result: Conducted Max tune up Power Turn-up ANT Gain Distance Density Power(max) power Mode Power (dBi) (cm) 2 (dBm) (dBm) (mW/ cm ) (dB) [G] [R] [P] [S] 802.11b 6.60 6±1 7 1.7 20 0.00147 802.11g 4.27 4±1 5 1.7 20 0.00093 802.11n 4.07 4±1 5 1.7 20 0.00093 (HT20) TB-RF-075-1.0

Report No.: TB-MPE166245 Page: 3 of 3 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range Power density (MHz) (mW/ cm2) 300-1,500 F/1500 1,500-100,000 1.0 For 802.11b/g/n:2412~2462 MHz MPE limit S: 1mW/ cm2 The MPE is calculated as 0.00147mW / cm2 < limit 1mW / cm2. So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report. -----END OF REPORT----- TB-RF-075-1.0


Document Created: 2019-06-29 14:39:16
Document Modified: 2019-06-29 14:39:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC