RF Exposure Report

FCC ID: 2AKBP-Q9

RF Exposure Info

Download: PDF
FCCID_4090232

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE162936 Page: 1 of 3 Maximum Permissible Exposure Evaluation FCC ID: 2AKBP-Q9 1. Client Information Applicant : Shenzhen Hysiry Technology Co., Ltd. No.524, BLDG A, One square world NET Industry Park, Xia Wei Addres : Yuan Wan Li Hua Industrial Zone, XiXiang Street, BaoAn District, ShenZhen, China Manufacturer : Shenzhen Hysiry Technology Co., Ltd. No.524, BLDG A, One square world NET Industry Park, Xia Wei Address : Yuan Wan Li Hua Industrial Zone, XiXiang Street, BaoAn District, ShenZhen, China 2. General Description of EUT EUT Name : SMART LAMP Models No. : Q9 Model Different : N/A Operation 802.11b/g/n(HT20): 2412MHz~2462MHz Frequency: 802.11b: 14.31dBm RF Output Power: 802.11g: 13.75dBm Product 802.11n (HT20): 13.58dBm : Description Antenna Gain: 1dBi PCB Antenna 802.11b: DSSS(CCK, DQPSK, DBPSK) Modulation Type: 802.11g/n: OFDM(BPSK,QPSK,16QAM, 64QAM) Power Supply : AC Voltage supplied Power Rating : Input: AC 100~240V,50/ 60Hz Software Version : N/A Hardware Version : N/A Connecting I/O : Please refer to the User's Manual Port(S) TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Report No.: TB-MPE162736 Page: 2 of 3 MPE Calculations for WIFI 1. Antenna Gain: PCB Antenna: 1dBi. 2. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 4. Test Result: Conducted Max tune up Power Turn-up ANT Gain Distance Density Power(max) power Mode Power (dBi) (cm) 2 (dBm) (dBm) (mW/ cm ) (dB) [G] [R] [P] [S] 802.11b 14.31 14±1 15 1 20 0.00792 802.11g 13.75 13±1 14 1 20 0.00629 802.11n 13.58 13±1 14 1 20 0.00629 (HT20) TB-RF-075-1.0

Report No.: TB-MPE162736 Page: 3 of 3 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range Power density (MHz) (mW/ cm2) 300-1,500 F/1500 1,500-100,000 1.0 For 802.11b/g/n:2412~2462 MHz MPE limit S: 1mW/ cm2 The MPE is calculated as 0.00792mW / cm2 < limit 1mW / cm2. So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report. -----END OF REPORT----- TB-RF-075-1.0


Document Created: 2019-03-25 09:14:55
Document Modified: 2019-03-25 09:14:55
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC