15_GC-1 UserMan

FCC ID: 2AJZY-GC-1

Users Manual

Download: PDF
FCCID_3168802

Bluetooth Earbud User manual GC-1 Product Specifications: Bluetooth version: 3.0 Bluetooth profiles: HSP, HFP, ADP AND AVRCP Battery: lithium battery 55 mAh Music playing time: 2.5 hours Talking time: 1.5 hours Charge time: 1.5 hours Skip and Voice prompt: Support Function: Call report, LINE Control answer/hang up/on-off, redial mute volume adjustment, music pause/play up and down song switching. Charge Battery: (Fully charge before first use) 1. Connect the provided charging cable to a power source and to the micro USB port on the headphones. 2. The indicator light shows red when charging and turns off when fully charged.

Pairing and Connection 1. To enter pairing mode press and hold the key for 3 seconds, and then release button when the blue light alternately blinks. 2. Open the Bluetooth menu on your mobile device. Select “Bluetooth Sequence Name” (Is this the correct name?) to pair. Once connection is established the blue indicator light will blink slowly. 3. For best function keep the headset within 3 feet of the mobile device. Key Function 1. On/Off: Press and hold the key for 3 seconds to turn on/off 2. Volume increase: press and hold the key＋;Volume reduction: Press ad hold the key－ 3. Phone: a) press the key to answer incoming call b) press again to end call c) press and hold the key for about 2 seconds and then release it to reject call

FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐Reorient or relocate the receiving antenna. ‐‐Increase the separation between the equipment and receiver. ‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device is measured RF output power is less than the SAR exclusion threshold value for human head and body. Therefore, SAR test is not necessary.


Document Created: 2016-10-19 10:53:59
Document Modified: 2016-10-19 10:53:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC