Report_MPE

FCC ID: 2AJVQ-MT7601U-M

RF Exposure Info

Download: PDF

FCCID_3905602

FCC ID: 2AJVQ-MT7601U-M

Power density (S) is calculated according to the formula:
S = PG / (4πR²)

Where S = power density in mW/cm²
P = transmit power in mW
G = numeric gain of transmit antenna (numeric gain=Log-1(dB antenna gain/10))
R = distance (cm)

As we can see from the test report 180502775SHA-001:

The calculations in the table below use the highest gain of antenna for client EUT. These calculations
represent worst case in terms of the exposure levels.

Frequency Max Antenna
R S Limits
Mode band Power Gain
(MHz) dBm dBi (cm) (mW/cm2) (mW/cm2)
WiFi 2400 -2483.5 16.24 4.12 20 0.0216 1
Note: 1 mW/cm2 from 1.310 Table 1

Page 2 of 3

FCC ID: 2AJVQ-MT7601U-M

Appendix I

Definition below must be outlined in the User Manual:

To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained
between the antenna of this device and persons during device operation. To ensure compliance, operations
at closer than this distance is not recommended.

Page 3 of 3

Document Created: 2018-06-20 14:41:20
Document Modified: 2018-06-20 14:41:20

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC