User manual_Rev 2

FCC ID: 2AJVQ-7638GUC

Users Manual

Download: PDF
FCCID_4207953

                                      Qingdao Intelligent & Precise Electronics Co., Ltd




ZDGF7638GU-C User Manual



Product Name:IEEE 802.11 b/g/n 2.4GHz 2T2R, Bluetooth 5.0 USB Module

                    Model :ZDGF7638GU-C


1. Introduction

      Thank you for using the Wi-Fimodule product provided by Qingdao Intelligent &Precise Electronics Co., Ltd.
Before use, please read this user manual carefully. Please follow the technical specifications when using the module
in your design and develop activities. Qingdao Intelligent &Precise Electronics Co., Ltd has the right to change the
contents of this manual in accordance with the needs of the technical development.


FCC & IC application:
This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.


Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.


Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.


MPE Requirements
To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained
between the antenna of this device and persons during device operation.
To ensure compliance, operations at closer than this distance is not recommended.


Les antennes installées doivent être situées de facon àce que la population ne puisse y être exposée àune distance
de moin de 20 cm. Installer les antennes de facon àce que le personnel ne puisse approcher à20 cm ou moins de la
position centrale de l’ antenne.
La FCC des éltats-unis stipule que cet appareil doit être en tout temps éloigné d’au moins 20 cm des personnes
pendant son functionnement.
                                                             1


Region Selection
Limited by local law regulations, version for North America does not have region selection option.

Label
Host labeling requirement: Contains transmitter module FCC ID: 2AJVQ-7638GUC.
Host labeling requirement: Contains transmitter module IC: 22470-7638GUC.

2.Product Information


2.1 Product Information

ZDGF7638GU-C Wi-FiUSB module is a wireless signal module device work at 2.4GHz(2.400 ~
2.4835GHz) .ZDGF7638GU-C comply with IEEE 802.11b、802.11 g、802.11 n standard. ZDGF7638GU-C support

USB 2.0, which has up to 480Mbps data rate. ZDGF7638GU-C also support Bluetooth specification 2.1+EDR、
Bluetooth 4.2 Low Energy and Bluetooth 5.0.
ZDGF7638GU-C Wi-Fi has 2T2R structure,has two onboard PIFA Antenna. It could provide stable wireless link
with high throughput.
ZDGF7638GU-C is a wireless signal module. It is widely used to multi-media device, such as smart TV. Equipped
with ZDGF7638GU-C, a smart TV could access to Wireless Local Network, which is also called WLAN or
WI-FInetwork. ZDGF7638GU-C helps multi-media device achieve to send & receive data package in a wireless
way.

2.2 Feature

         ●IEEE standard:IEEE 802.11b/g/n client device
         ●Bluetooth 5.0
         ●operating Frequency 2.4GHz
         ● 2T2R mode
         ●Support 20MHz, 40MHz band width in 2.4GHz band.
         ●support USB 2.0 high data rate mode,10-pin interface
         ●support WFA/ WPA/WPA2 /WPS2.0/WAPI security
         ●RoH
         ●MAC /baseband/RF: MT7638GU

3. Product Specification


       3.1 Parameter


    WLAN Standard                      IEEE802.11b/g/n

    Data Interface                     USB2.0
                                       WI-FI:
    Modulation Mode
                                       802.11b:CCK, DQPSK, DBPSK
                                                         2


                                802.11g:64QAM, 16QAM, QPSK, BPSK
                                802.11n:64QAM, 16QAM, QPSK, BPSK
   Working Frequency            2.4G: 2400-2483.5MHz;
                                802.11b CCK 11Mbps@2.4GHz:-85dBm
   Receiver Sensitivity         802.11g OFDM@2.4GHz:-75dBm
                                802.11n HT40 (MCS7) @2.4GHz:-68dBm
   EVM                          ±15ppm

   Working Voltage              5V±10% I/O supply voltage

   Wi-Fi Antenna Gain           Ant0:1.5dBi (MAX) , Ant1:1.5dBi (MAX)


   Antenna type                 Two onboard PIFA antennas

   Working Temperature          -10~+70℃

   Storage Temperature          -40~+125℃

   BT Standard                  BT 2.1+EDR, BT 4.2 BLE, BT5.0

                                Bluetooth:
   BT Modulation Mode
                                GFSK, π/4-DQPSK and 8-DPSK

   BT Antenna Gain              1.5 dBi (MAX)

4. Hardware information


4.1 structure dimension:(Unit:mm)

PCB Material:FR-4,Surface treatment:OSP.
Appearance Dimension(mm):70(+/- 0.3)×45(+/- 0.3)
PCB thickness:1.6mm(+/-0.15mm).
Via:Ф4mm(+/-0.15mm).


4.2 PIN definition

                          No.                         Definition
                           1                             VCC
                          2                               VCC
                          3                             GND
                          4                           USBDM
                          5                              NC
                          6                            USBDP
                          7                       WIFI_DEV_WAKE
                          8                             GND
                          9                          WIFI_REG_ON
                          10                              RST


                                                 3


    4.3 Block Diagram




                                           BLOCK DIAGRAM



5 EU single contact point
Hisense Czech (Manufacture) s.r.o.
U Nové Hospody 1164/4, 301 00 Plzeň ,Czech Republic.
6 Manufacture’s postal address
No.218, Qianwangang Road, Qingdao Economic & Technological Development Zone, Shandong, China
7 Importer’s name & address
Hisense Czech (Manufacture) s.r.o.
U Nové Hospody 1164/4, 301 00 Plzeň ,Czech Republic.




                                                       4



Document Created: 2019-03-12 13:48:57
Document Modified: 2019-03-12 13:48:57

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC