User Manual

FCC ID: 2AJU3RT719

Users Manual

Download: PDF
FCCID_3922092

Product Diagram Quick Guide Power On FAQ Take out the USB receiver Q1: The cursor is out of control or randomly moving around. Lndicator Light A: Put the remote control on the desktop, and wait Voice for 5 seconds before use. Customize Mic Shortcuts Q2: The indicator light is flashing, but the remote Mini Wireless Keyboard ON control works well. Search Next Track Mouse Combo A: This state is the low power state, Please charge it Last Track Play/Pause with a charging cable. Menu Returned Q3: The indicator light is flashing, but the remote Home Arrow key control can not control anything on the device. A1: Check if the receiver is plugged in firmly, you Confirm can replug in the receiver again to see if it can recover to work again. if no, please do step A2. Mute A2: Place the remote control very close to the 1BHF61 SFDFJWFS UIFOQSFTTUIFOKLFZBOE 7PMVNF  Ready to work Page Dn key at the same time to see if it can recover to work again. Analog Cursor Connecting 25IFLFZEPFTOPUXPSL "5IFLFZJTBOJOGSBSFEGVODUJPOLFZ:PVOFFE Number Key to let it learn before using it. Please refer to the “Learning Procedure” section. Channel Delete Returns Keyboard layout Keyboard keys are the regular letter keys. The blue characters output needs pressing corresponding key and FN as well. Plug the USB Receiver into the USB port This key is with infrared function. it can learn and VER: 1.0 act as the other infrared remote control button’s Part No: 06719207101 function. VER: 1.0 The blue character key: Learning procedure: LED Indicator: Maintenance: FCC Notice Press FN and the blue character key to input blue Blue LED it will be always on if the connection is normal. tDo not attempt to disassemble the device or This device complies with Part 15 of the FCC Rules. character. tThe light will flashes once when any key pressed. replace the rechargeable battery yourself. Operation is subject to the following two conditions: tWhen the remote control is not connected to the tThe battery will discharge when it is stored for a (1) This device may not cause harmful interference, '/ '/  Infrared key could learn from other infrared remote receiver, this light will flash at a lower rate. long time without operation. and (2) this device must accept any interference control button received, including interference that may cause '/ %FM Steps: tThe remote light will flashes at a higher rate when tUse the specified charger. Disconnect the device undesired operation. the remote control is at low power state. when the battery is fully charged. NOTE 1: This equipment has been tested and found 1. Press and hold down one of the five infrared keys Specifications: Red LED - charging status. It is on when charging. t0WFSDIBSHJOHXJMMTIPSUFOUIFCBUUFSZMJGF to comply with the limits for a Class B digital device, for 3 seconds, the LED will be on to indicate that t3FDFJWFS EPOHMF /BOPTUZMF After fully charged, it’llbe off. pursuant to part 15 of the FCC Rules. These limits it has entered in learning state. Disposal: t$PNQBUJCMFXJUI64#PSBCPWF tBacklight: When any key pressed, the backlight will are designed to provide reasonable protection light up for 5 seconds. Always dispose the used appliance at a against harmful interference in a residential installation. tTransmission mode: GFSK 2.4GHz, up to 10 meters This equipment generates, uses and can radiate tSleep:The keyboard supports auto sleep and wake-up. recycling center. Do not dispose the used t5SBOTNJTTJPOQPXFS-FTTUIBO EC radio frequency energy and, if not installed and used Without operation around 3 minutes, the keyboard appliance together with the household waste. t4MFFQJOHDVSSFOUDMBTTV" in accordance with the instructions, may cause harmful will enter sleep mode. In sleep status, all LED indicators interference to radio communications. However, FCC ID: 2AJU3RT719 t0QFSBUJPOWPMUBHF7 Note: are off. Pressing any key can wake it up. there is no guarantee that interference will not occur t0QFSBUJOHDVSSFOUN" Due to 2.4G wave technology adoption, the connection in a particular installation. If this equipment does t1SPEVDUXFJHIUH /PU$POUBJOTCBUUFSZ 2. Let the learnt remote controller’s infrared focus on Warning: can be subject to interference from obstacles, like cause harmful interference to radio or television t1SPEVDUTJ[F  NN the original receiving infrared, keep the distance as tThe attached USB cable just can be used for charging, walls, metals, or other electronic devices. reception, which can be determined by turning the it can not be used for data transfer. Please keep the space between the keyboard and equipment off and on, the user is encouraged to System Requirements close as 1 to 3cm and then pressing down the tWhen charging finishes, pull out the charging cable. USB receiver free of obstacle.In line with the policy try to correct the interference by one or more of learnt button. the following measures: HID compatible device tNever try to open or repair this product yourself. of continued development, the manufacturer reserves Terminal with USB port - Reorient or relocate the receiving antenna. t,FFQUIJTEFWJDFBXBZGSPNGMVJET TVDIBTXBUFS the right to amend The specifications without prior - Increase the separation between the equipment 8JOEPXt8JOEPX91 notification. The illustrations in the user manual are and receiver. Windows Vista, Windows CE, Windows 7, Window 8 - Connect the equipment into an outlet on a circuit for reference only. Please operate according to the Linux(Debian-3.1,Redhat-9.0,Ubuntu-8.10, different from that to which the receiver is connected. real design. Fedora-7.0 tested) - Consult the dealer or an experienced radio/TV Android OS (With standard USB interface) 3. If the learning is completed with success, the LED technician for help. NOTE 2: Any changes or modifications to this unit will flash for 2 seconds and quit learning state. not expressly approved by the party responsible 4. The learning state will be ended if it has not detected for compliance could void the user's authority to any infrared signal within 10 seconds. operate the equipment. પ‫ޢ‬а௲गܑ஼Mୢߡ঻ RT719 પ‫ޢ‬аܑ஼եۨս‫تؾ‬͹>SS 57䈪᱄Ҝ VER:2.0  %HQ  PPᣎ 2018/06/27

FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.


Document Created: 2018-07-11 11:40:28
Document Modified: 2018-07-11 11:40:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC