MPE Report

FCC ID: 2AJRQ-ME300RE

RF Exposure Info

Download: PDF
FCCID_3134108

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE149565 Page: 1 of 4 Maximum Permissible Exposure Evaluation FCC ID: 2AJRQ-ME300RE 1. Client Information Applicant : Maxeye Smart Technologies Co., Ltd. Address : Room 6008, Chuangxingda Building, Xinan, Baoan, Shenzhen, P.R.C Manufacturer : Maxeye Smart Technologies Co., Ltd. Address : Room 6008, Chuangxingda Building, Xinan, Baoan, Shenzhen, P.R.C 2. General Description of EUT EUT Name : ME300RE 1.0 Models No. : ME300RE 1.0 Model : N/A Difference Operation Frequency: 802.11b/g/n(HT20): 2412MHz~2462MHz 802.11n(HT40): 2422MHz~2452MHz 802.11b/g/n(HT20):11 channels see note(3) Number of Channel: 802.11n(HT40): 7 channels see note(3) RF Output Power: 802.11b: 22.19 dBm 802.11g: 21.94 dBm Product 802.11n (HT20): 21.86 dBm : 802.11n (HT40): 21.78 dBm Description Antenna Gain: 4.6 dBi Dipole Antenna Modulation Type: 802.11b: DSSS(CCK, QPSK, BPSK) 802.11g: OFDM 802.11n: OFDM Bit Rate of 802.11b:11/5.5/2/1 Mbps Transmitter: 802.11g:54/48/36/24/18/12/9/6 Mbps 802.11n:up to 150Mbps TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Shenzhen Toby Technology Co., Ltd. Report No.: TB-MPE149565 Page: 2 of 4 Power Supply : DC 5V supplied by AC/DC Adapter. Power Rating : AC/DC Adapter: Input: AC 100~240V, 50/60Hz Output: DC 5V Connecting : Please refer to the User's Manual I/O Port(S) Note: More information about the RF function, please refer the RF test reports. TB-RF-075-1.0 1A/F., Bldg.6, Yusheng Industrial Zone, The National Road No.107 Xixiang Section 467, Xixiang, Bao’an, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195

Report No.: TB-MPE149565 Page: 3 of 4 MPE Calculations for WIFI 1. Antenna Gain: Dipole Antenna: 4.6 dBi. 2. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 4. Test Result: Worst Maximum MPE Result Conducted Max tune up Power Turn-up ANT Gain Distance Density Freq. Power(max) power Mode NTX Power (dBi) (cm) 2 (MHz) (dBm) (dBm) (mW/ cm ) (dB) [G] [R] [P] [S] 2412 22.09 22±1 23 4.6 20 0.114 802.11b 1 2437 22.19 22±1 23 4.6 20 0.114 2462 22.13 22±1 23 4.6 20 0.114 2412 21.87 21±1 22 4.6 20 0.091 802.11g 1 2437 21.88 21±1 22 4.6 20 0.091 2462 21.94 21±1 22 4.6 20 0.091 2412 21.71 21±1 22 4.6 20 0.091 802.11n 2 2437 21.77 21±1 22 4.6 20 0.091 (HT20) 2462 21.86 21±1 22 4.6 20 0.091 2422 21.78 21±1 22 4.6 20 0.091 802.11n 2 2437 21.70 21±1 22 4.6 20 0.091 (HT4) 2452 21.74 21±1 22 4.6 20 0.091 Note: (1) NTX= Number of Transmit Antennas (2) RF Output power specifies that Maximum Conducted Peak Output Power. 5. Conclusion: TB-RF-075-1.0

Report No.: TB-MPE149565 Page: 4 of 4 As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range Power density (MHz) (mW/ cm2) 300-1,500 F/1500 1,500-100,000 1.0 For 802.11b/g/n (2412~2462 MHz) MPE limit S: 1 mW/ cm2 The MPE is calculated as 0.114mW / cm2 < limit 1 mW / cm2. So, RF exposure limit warning or SAR test are not required. The EUT will only be used with a separation of 20cm or greater between the antenna and nearby persons and can therefore be considered a mobile transmitter per 47 CFR2.1091 (b). The RF Exposure Information page from the manual is included here for reference. Note For a more detailed features description, please refer to the RF Test Report. -----END OF REPORT----- TB-RF-075-1.0


Document Created: 2019-11-07 08:59:41
Document Modified: 2019-11-07 08:59:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC