User Manual

FCC ID: 2AJQ6MCG-13268

Users Manual

Download: PDF
FCCID_3844171

FCC Statements Installing Batteries Open the M-BTi using the latch on the right side of the camera housing. The M-BTi requires eight (8) AA alkaline or lithium batteries. There are two Moultrie Products Instructions for the M-BTi Game Camera levels for battery placement within the compartment. Be sure to orientate the batteries according to the polarity icons found in the compartment. MCG-13268 Downloading the SmartSet™ app All settings for the M-BTi are controlled using the Moultrie SmartSet app and a Bluetooth connection. Download your free SmartSet app M-BTi THANK YOU for your purchase of an M-BTi Game Camera. Please read this booklet before using the unit. If you should have any through the App Store or on Google Play. questions about this product, please contact us using the information on the back of this booklet. Please register your camera at www.moultriefeeders.com/warranty to activate your warranty. Powering Up Note: changes and modifications not expressly approved by the party responsible could void the user’s authority to operate this device. The power switch is located next to the SD card slot. Slide left for on, the red LED will come on momentarily. Installing SD Card This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must Access the SD Card port using the latch on the right side of the camera housing. Slide card into slot with label side up (see icon next to card slot). accept any interference received, including interference that may cause undesired operation. Motion Sensor Card will click into place. To remove, push card inward to eject. Be sure to format your SD Card once you have downloaded the SmartSet™ app Infrared LED Flash NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS (See Quick Start Instructions). COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. Understanding the Red LED NOTE: This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against The red LED comes on: harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Camera Lens A. To indicate there is power to the camera. The LED will then go off indicating it is ready to capture images. instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the Light Sensor B. Once the sensor detects movement and captures an image interference by one or more of the following measures: C. When a Bluetooth connection is made using the SmartSet app - Reorient or relocate the receiving antenna. SD Card Slot - lncrease the separation between the equipment and receiver. Accepts up to a 32GB SD Card (Class 4 or higher) for photo and video storage. NOTE: A Class 4 or higher SD Card must be installed for the camera - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. ON/OFF Switch to operate (sold separately). Ultra/turbo SD cards are not recommended. USB Port Download still pictures and video onto your computer by connecting a micro-B to USB cable (not included) to the USB port, or connect to a SD Card Slot Moultrie Mobile compatible modem. External Power Port www.moultriefeeders.com Accepts Moultrie power accessories (sold separately) only. Refer to www.moultriefeeders.com for more information. PRADCO Outdoor Brands • 3280 Highway 31, Ste B • Calera, AL 35040 NOTE: The use of any other power source will void your warranty and possibly harm your camera. 01252018 / MCG-13268 Micro USB Port External Power Port Battery Compartment MCG-13268_M-BTi (2018) manual_ENGLISH_1-25-18_FINAL.indd 1 1/25/18 10:32 AM

QUICK START INSTRUCTIONS Easy redefined. Important Battery lnformation - Only use Alkaline or Lithium batteries. We recommend the use of Energizer® batteries. Set up the M-BTi on your smartphone using the Use the steps below to quickly set up your camera using the factory default settings. - Do not mix old and new batteries. Always replace ALL the batteries at the same time. Moultrie SmartSet™ app and a Bluetooth connection. - When the camera is not in use, please remove the batteries. STEP 1 - Using weak batteries can adversely affect the performance of your camera and degrade the Bluetooth® connection between Open camera cover. Install eight (8) AA size alkaline or lithium batteries with polarities as indicated in the battery compartment. your app and camera. SmartSet™ speeds setup. Turn on camera. Next, download the SmartSet™ app onto your smartphone using the Apple App Store or Google Play. Choose from preset modes or easily customize to your preferred settings. Moultrie Limited Warranty This product has been thoroughly tested and inspected before shipment. It is guaranteed from defects in material and workmanship from the From managing memory to selecting photo settings, it’s all done STEP 2 date of purchase for two (2) years. Under this limited guarantee we agree to replace or repair free of charge any part or parts which have been Insert SD card, then open your SmartSet app. In General Settings select Format SD Card. found to be defective in original material or workmanship. Should you require in-warranty service, call our Customer Service Department. with a tap. Plus, time and date are now set automatically by the Eyelet The SD card must be formatted for camera operation. Note that formatting the If your problem cannot be addressed over the telephone, we may need you to send us your defective product plus proof of purchase. Moultrie SmartSet app! SD card will erase all images on that card. Camera will not operate without You must register your camera at www.moultriefeeders.com/warranty to activate your two-year warranty. Not sure which settings to choose? SmartSet Tool Tips formatted SD card. can guide you through setup. Troubleshooting For troubleshooting and helpful tips please visit the “Help” section within the Moultrie SmartSet™ app. If you require additional assistance, STEP 3 email us at info@MoultrieSmartSet.com. Requires the Moultrie SmartSet™ app, Mount camera in desired location using the included mounting strap. The camera a free download, available for iOS and Android. also has two (2) Python™ Cable Loops for added security (cable sold seperately). Returns and Repairs NOTE: Camera must be attached to a stable object for motion detection to Please visit http://www.moultriefeeders.com/return-policy and complete the form. SmartSet™ function properly. Mounting camera on an unstable structure may result in excessive image captures with no subject (false triggers). Moultrie Mobile® Compatibility The M-BTi game camera is compatible with Moultrie Mobile when connected to a Moultrie Mobile modem. Please visit Moultrie Mobile.com for monthly plan pricing and more information. STEP 4 Confirm the camera is still on. Close cover. Mounting Strap Terms and Conditions Python™ Cable This product and the Moultrie SmartSet application are subject to terms and conditions. Use of the product or the Moultrie SmartSet application Google Play is a trademark of Google Inc. Loops constitutes acceptance of those terms and conditions. For details about the terms and conditions, download the Moultrie SmartSet application Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. for your mobile device. App Store is a service mark of Apple Inc. MCG-13268_M-BTi (2018) manual_ENGLISH_1-25-18_FINAL.indd 2 1/25/18 10:32 AM


Document Created: 2018-01-25 10:32:54
Document Modified: 2018-01-25 10:32:54
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC