I19Z60257-SEM02_HAC_Rev0_part2

FCC ID: 2AJOTTA-1182

Test Report

Download: PDF
FCCID_4262825

Calibration Laboratory of C g Schweizerischer Kalibrierdienst H m Schmid & Partner e qs C Service suisse d‘étalonnage Engineering AG z_ Servizio svizzero di taratura S 3. \ /,ul Zeughausstrasse 43, 8004 Zurich, Switzerland /( {r~\‘w Swiss Calibration Service Aerlutute®® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Client CTTL (Auden) Certificate No: CD1880V3—1018_Aug18 CALIBRATION CERTIFICATE Object CD1880V3 — SN: 1018 Calibration procedure(s) QA CAL—20.v6 Calibration procedure for dipoles in air Calibration date: August 28, 2018 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 04—Apr—18 (No. 217—02672/02673) Apr—19 Power sensor NRP—Z91 SN: 103244 04—Apr—18 (No. 217—02672) Apr—19 Power sensor NRP—Z91 SN: 103245 04—Apr—18 (No. 217—02673) Apr—19 Reference 20 dB Attenuator SN: 5058 (20k) 04—Apr—18 (No. 217—02682) Apr—19 Type—N mismatch combination SN: 5047.2 / 06327 04—Apr—18 (No. 217—02683) Apr—19 Probe EF3DV3 SN: 4013 05—Mar—18 (No. EF3—4013_Mar18) Mar—19 DAE4 SN: 781 17—Jan—18 (No. DAE4—781_Jan18) Jan—19 Secondary Standards ID # Check Date (in house) Scheduled Check Power meter Agilent 44198 SN: GB42420191 09—Oct—09 (in house check Oct—17) In house check: Oct—20 Power sensor HP E4412A SN: US38485102 05—Jan—10 (in house check Oct—17) In house check: Oct—20 Power sensor HP 8482A SN: US37295597 09—Oct—09 (in house check Oct—17) In house check: Oct—20 RF generator R&S SMT—06 SN: 882283/011 27—Aug—12 (in house check Oct—17) In house check: Oct—20 Network Analyzer Agilent E8358A SN: US41080477 31—Mar—14 (in house check Oct—17) In house check: Oct—18 Name Function Signature Calibrated by: Leif Klysner Laboratory Technician a k% Approved by: Katia Pokovic Technical Manager ///Z; Issued: August 28, 2018 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: CD1880V3—1018_Aug18 Page 1 of 5

w19 1970 Calibration Laboratory of SCs / S Schweizerischer Kalibrierdienst § (st® Schmid & Partner \—/ C Service suisse d‘étalonnage Engineering AG zn Servizio svizzero di taratura S wl YA Zeughausstrasse 43, 8004 Zurich, Switzerland if ~x® Swiss Calibration Service X Uoliile® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates References [1] ANSI—C63.19—2011 American National Standard, Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids. Methods Applied and Interpretation of Parameters: * Coordinate System: y—axis is in the direction of the dipole arms. z—axis is from the basis of the antenna (mounted on the table) towards its feed point between the two dipole arms. x—axis is normal to the other axes. In coincidence with the standards [1], the measurement planes (probe sensor center) are selected to be at a distance of 15 mm above the top metal edge of the dipole arms. * Measurement Conditions: Further details are available from the hardcopies at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. The forward power to the dipole connector is set with a calibrated power meter connected and monitored with an auxiliary power meter connected to a directional coupler. While the dipole under test is connected, the forward power is adjusted to the same level. * Antenna Positioning: The dipole is mounted on a HAC Test Arch phantom using the matching dipole positioner with the arms horizontal and the feeding cable coming from the floor. The measurements are performed in a shielded room with absorbers around the setup to reduce the reflections. It is verified before the mounting of the dipole under the Test Arch phantom, that its arms are perfectly in a line. It is installed on the HAC dipole positioner with its arms parallel below the dielectric reference wire and able to move elastically in vertical direction without changing its relative position to the top center of the Test Arch phantom. The vertical distance to the probe is adjusted after dipole mounting with a DASY5 Surface Check job. Before the measurement, the distance between phantom surface and probe tip is verified. The proper measurement distance is selected by choosing the matching section of the HAC Test Arch phantom with the proper device reference point (upper surface of the dipole) and the matching grid reference point (tip of the probe) considering the probe sensor offset. The vertical distance to the probe is essential for the accuracy. e Feed Point Impedance and Return Loss: These parameters are measured using a HP 8753E Vector Network Analyzer. The impedance is specified at the SMA connectorof the dipole. The influence of reflections was eliminating by applying the averaging function while moving the dipole in the air, at least 70cm away from any obstacles. * E—field distribution: E field is measured in the x—y—plane with an isotropic ERSD—field probe with 100 mW forward power to the antenna feed point. In accordance with [1], the scan area is 20mm wide, its length exceeds the dipole arm length (180 or 90mm). The sensor center is 15 mm (in z) above the metal top of the dipole arms. Two 3D maxima are available near the end of the dipole arms. Assuming the dipole arms are perfectly in one line, the average of these two maxima (in subgrid 2 and subgrid 8) is determined to compensate for any non—parallelity to the measurement plane as well as the sensor displacement. The E—field value stated as calibration value represents the maximum of the interpolated 3D—E—field, in the plane above the dipole surface. The reported uncertainty of measurementis stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. Certificate No: CD1880V3—1018_Aug18 Page 2 of 5

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY5 V52.10.1 Phantom HAC Test Arch Distance Dipole Top — Probe Center 15 mm Scan resolution dx, dy = 5 mm Frequency 1880 MHz +1 MHz Input power drift <0.05 dB Maximum Field values at 1880 MHz E—field 15 mm above dipole surface condition Interpolated maximum Maximum measured above high end 100 mW input power 89.2 V/m = 39.01 dBV/m Maximum measured above low end 100 mW input power 88.5 V/m = 38.94 dBV/m Averaged maximum above arm 100 mW input power 88.9 V/im + 12.8 % (k=2) Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters Frequency Return Loss Impedance 1730 MHz 31.6 dB 52.7 Q — 0.4 jQ 1880 MHz 23.8 dB 54.4 Q + 5.1 jQ 1900 MHz 23.6 dB 56.1 Q + 3.4 jQ 1950 MHz 32.5 dB 52.0 Q — 1.3 jQ 2000 MHz 20.3 dB 47.3 Q + 9.1 jQ 3.2 Antenna Design and Handling The calibration dipole has a symmetric geometry with a built—in two stub matching network, which leads to the enhanced bandwidth. The dipole is built of standard semirigid coaxial cable. The internal matching line is open ended. The antenna is therefore open for DC signals. Do not apply force to dipole arms, as they are liable to bend. The soldered connections near the feedpoint may be damaged. After excessive mechanical stress or overheating, check the impedance characteristics to ensure that the internal matching network is not affected. After long term use with 40W radiated power, only a slight warming of the dipole near the feedpoint can be measured. Certificate No: CD1880V3—1018_Aug18 Page 3 of 5

Impedance Measurement Plot File View Channel Sweep Calibration Trace Scale Marker System Window Help 7.00 1 1.f30000 GHz 4161308 200 + $80000.01 as sns 4e 3 4oonde—Gr s2t3P S.98 [ —rsmorore |s.00 i— & 2 nnnn AH= 20 297 48 * ‘a F13.00 _z 7 F1s.00 > FA ~ 4 2s.00 ~ 4 ,Z |2s.00 \; L 3 > Y Las.0o % L3s.00 ig xf a| 00 Ch 1 Avg= 20 " Chi: Star 1.38000 6He ——— Stop 2.38000 GHz 1 1730000 GHz 526700 244.95pF 37557 m0 »2 1.880000 GHz 54.380 0 433.74pH 5142350 3 1.900000 GHz 56136 0 281.95 pH 3.3659 n 4: 1.950000 GHa 52.042 0 B4.103pF 127320 $ 2.000000 GHz 47.3040 720.28pH 905130 Ch1Avg= 20 Ch1: Start 1.38000 GHz —— Stop 2.38000 GHz Status CH 1: 511 ] C" 1—Port Avg=20 Delay LCL Certificate No: CD1880V3—1018_Aug18 Page 4 of 5

mm: Do e e e e s (DASY5 E—field Result Test Laboratory: SPEAG Lab2 DUT: HAC Dipole 1880 MHz; Type: CD1880V3; Serial: CD1880V3 — SN: 1018 Date: 28.08.2018 Communication System: UID 0 — CW ; Frequency: 1880 MHz Medium parameters used: 0 =0 $/m, &=1; p=0 kg/m‘ Phantom section: RF Section Measurement Standard: DASYS (IEEE/IEC/ANSI C63.19—201 1) DASY52 Configuration: Probe: EF3DV3 — SN4013; ConvF(1, 1, 1) @ 1880 MHz; Calibrated: 05.03.2018 Sensor—Surface: (Fix Surface) Electronics: DAE4 Sn781; Calibrated: 17.01.2018 Phantom: HAC Test Arch with AMCC; Type: SD HAC PO1 BA; Serial: 1070 DASY52 52.10.1(1476); SEMCAD X 14.6.11(7439) Dipole E—Field measurement @ 1880MHz/E—Scan — 1880MHz d=15mm/Hearing Aid Compatibility Test (41x181x1): Interpolated grid: dx=0.5000 mm, dy=0.5000 mm Device Reference Point: 0, 0, —6.3 mm Reference Value = 154.3 V/m; Power Drift=—0.01 dB Applied MIF = 0.00 dB RF audio interference level = 39.01 dBV/m Emission category: M2 MIF scaled E—field Grid 1 M2 Grid 2 M2 Grid 3 M2 38.68 dBV/m|39.01 dBV/m|38.9 dBV/m Grid 4 M2 Grid 6 M2 36.09 dBV/m 36.21 dBV/m Grid 7 M2 Grid 8 M2 Grid 9 M2 38.7 dBV/m [38.94 dBV/m|38.84 dBV/m —0.97 1.3 —2.90 ~3.86 ~4.83 0 dB = 89.22 V/m = 39.01 dBV/m Certificate No: CD1880V3—1018_Aug18 Page 5 of 5

_oam._© 777 (Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland Accredited by the Swiss Accreditation Service (SAS) * m Ny Arlutulst®" S C S Schweizerischer Kalibrierdienst Service suisse d‘étalonnage Servizio svizzero di taratura Swiss Calibration Service Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Client CTTL—BJ (Auden) Certificate No: CD2600V3—101 7_Aug18 CALIBRATION CERTIFICATE Object CD2600V3 — SN: 1017 Calibration procedure(s) QA CAL—20.v6 Calibration procedure for dipoles in air Calibration date: August 22, 2018 This calibration certificate documents the traceability to nationalstandards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 04—Apr—18 (No. 217—02672/02673) Apr—19 Power sensor NRP—Z91 SN: 1083244 04—Apr—18 (No. 217—02672) Apr—19 Power sensor NRP—Z291 SN: 103245 04—Apr—18 (No. 217—02673) Apr—19 Reference 20 dB Attenuator SN: 5058 (20k) 04—Apr—18 (No. 217—02682) Apr—19 Type—N mismatch combination SN: 5047.2 / 06827 04—Apr—18 (No. 217—02683) Apr—19 Probe EF3DV3 SN: 4013 05—Mar—18 (No. EF3—4013_Mar18) Mar—19 DAE4 SN: 781 17—Jan—18 (No. DAE4—781_Jan18) Jan—19 Secondary Standards ID # Check Date (in house) Scheduled Check Power meter Agilent 4419B SN: GB42420191 09—Oct—09 (in house check Oct—17) In house check: Oct—20 Power sensor HP E4412A SN: US38485102 05—Jan—10 (in house check Oct—17) In house check: Oct—20 Power sensor HP 8482A SN: US37295597 09—Oct—09 (in house check Oct—17) In house check: Oct—20 RF generator R&S SMT—06 SN: 832283/011 27—Aug—12 (in house check Oct—17) In house check: Oct—20 Network Analyzer HP 8358A SN: US41080477 31—Mar—14 (in house check Oct—17) In house check: Oct—18 Name Function Signature Calibrated by: Jeton Kastrati Laboratory Technician MV C— Approved by: Katia Pokovie Technical Manager Issued: August 23, 2018 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: CD2600V3—1017_Aug18 Page 1 of 5

© Calibration . Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland Accredited by the Swiss Accreditation Service (SAS) JA 4m tm S\ /%S ily/l;_ 4,L //% / 38 Calutals® S ( 5 Schweizerischer Kalibrierdienst Service suisse d‘étalonnage Servizio svizzero di taratura Swiss Calibration Service Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates References [1] ANSI—C63.19—2011 American National Standard, Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids. Methods Applied and Interpretation of Parameters: Coordinate System: y—axis is in the direction of the dipole arms. z—axis is from the basis of the antenna (mounted on the table) towards its feed point between the two dipole arms. x—axis is normal to the other axes. In coincidence with the standards [1], the measurement planes (probe sensor center) are selected to be at a distance of 15 mm above the top metal edge of the dipole arms. Measurement Conditions: Further details are available from the hardcopies at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. The forward power to the dipole connector is set with a calibrated power meter connected and monitored with an auxiliary power meter connected to a directional coupler. While the dipole under test is connected, the forward power is adjusted to the same level. Antenna Positioning: The dipole is mounted on a HAC Test Arch phantom using the matching dipole positioner with the arms horizontal and the feeding cable coming from the floor. The measurements are performed in a shielded room with absorbers around the setup to reduce the reflections. It is verified before the mounting of the dipole under the Test Arch phantom, thatits arms are perfectly in a line. It is installed on the HAC dipole positioner with its arms parallel below the dielectric reference wire and able to move elastically in vertical direction without changing its relative position to the top center of the Test Arch phantom. The vertical distance to the probe is adjusted after dipole mounting with a DASY5 Surface Check job. Before the measurement, the distance between phantom surface and probe tip is verified. The proper measurement distance is selected by choosing the matching section of the HAC Test Arch phantom with the proper device reference point (upper surface of the dipole) and the matching grid reference point (tip of the probe) considering the probe sensor offset. The vertical distance to the probe is essential for the accuracy. Feed Point Impedance and Return Loss: These parameters are measured using a HP 8753E Vector Network Analyzer. The impedance is specified at the SMA connectorof the dipole. The influence of reflections was eliminating by applying the averaging function while moving the dipole in the air, at least 70cm away from any obstacles. E—field distribution: E field is measured in the x—y—plane with an isotropic ER3D—field probe with 100 mW forward power to the antenna feed point. In accordance with [1], the scan area is 20mm wide, its length exceeds the dipole arm length (180 or $Omm). The sensor centeris 15 mm (in z) above the metal top of the dipole arms. Two 3D maxima are available near the end of the dipole arms. Assuming the dipole arms are perfectly in one line, the average of these two maxima (in subgrid 2 and subgrid 8) is determined to compensate for any non—parallelity to the measurement plane as well as the sensor displacement. The E—field value stated as calibration value represents the maximum of the interpolated 3D—E—field, in the plane above the dipole surface. The reported uncertainty of measurementis stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probatbility of approximately 95%. Certificate No: CD2600V3—1017_Aug18 Page 2 of 5

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY5 V52.10.1 Phantom HAC Test Arch Distance Dipole Top — Probe Center 15 mm Scan resolution dx, dy = 5 mm Frequency 2600 MHz £ 1 MHz Input power drift <0.05 dB Maximum Field values at 2600 MHz E—field 15 mm above dipole surface condition Interpolated maximum Maximum measured above high end 100 mW input power 86.3 V/m = 38.72 dBV/m Maximum measured above low end 100 mW input power 85.4 V/m = 38.63 dBV/m Averaged maximum above arm 100 mW input power 85.8 V/m + 12.8 % (k=2) Appendix (Additional assessments outside the scope of SCS 0108) Antenna Parameters Frequency Return Loss Impedance 2450 MHz 24.4 dB 44.5 Q + 1.6 jQ 2550 MHz 21.8 dB 57.4 Q + 4.7 jQ 2600 MHz 20.6 dB 59.7 Q — 3.3 jQ 2650 MHz 19.8 dB 55.1 Q — 9.5 jQ 2750 MHz 16.0 dB 41.7 Q —12.1 jQ 3.2 Antenna Design and Handling The calibration dipole has a symmetric geometry with a built—in two stub matching network, which leads to the enhanced bandwidth. The dipole is built of standard semirigid coaxial cable. The internal matching line is open ended. The antenna is therefore open for DC signals. Do not apply force to dipole arms, as they are liable to bend. The soldered connections near the feedpoint may be damaged. After excessive mechanical stress or overheating, check the impedance characteristics to ensure that the internal matching network is not affected. After long term use with 40W radiated power, only a slight warming of the dipole near the feedpoint can be measured. Certificate No: CD2600V3—1017_Aug18 Page 3 of 5

© Impedance Measurement Plot File View Channel Sweep Calibration Trace Scale Marker System Window Help 0000 GHz 2441408 2.00 000054 177440 3 2400000 GHz j3.00 T 7 2| —reaar s.00 5_ Cok> |_— ~ L43.00 Ch 1 Avg= |20 Ir Ch1: Start 2.10000 GHz ——— Stop 3.10000 GHz 2.450000 GHz 44.545 0 104.78 pH 16130 a 2550000 GHz 57.491 0 290 28 pH 4.6509 n 200000 GHz 59.700 a 18.549 pF 33012 0 2650000 GHz 55.136 0 6.3050 pF 4 5255 a 2750000 GHz 41677 0 47670 pF —12.141 0 Ch1Aug= 20 Ch1: Start 2.10000 GHz —— Stop 3.10000 GHz Status __CH 1: 511 | C" 1—Port Avg=20 Delay tEE Certificate No: CD2600V3—1017_Aug18 Page 4 of 5

DASY5 E—field Result Date: 22.08.2018 Test Laboratory: SPEAG Lab2 DUT: HAC Dipole 2600 MHz; Type: CD2600V3; Serial: CD2600V3 — SN: 1017 Communication System: UID 0 — CW ; Frequency: 2600 MHz Medium parameters used: 0 = 0 S/m, & = 1; p = 0 kg/m‘ Phantom section: RF Section Measurement Standard: DASYS (IEEE/IEC/ANSI C€63.19—2011) DASY52 Configuration: Probe: EF3DV3 — SN4013; ConvF(1, 1, 1) @ 2600 MHz; Calibrated: 05.03.2018 ce Sensor—Surface: (Fix Surface) e Electronics: DAE4 Sn781; Calibrated: 17.01.2018 e Phantom: HAC Test Arch with AMCC; Type: SD HAC PO1 BA; Serial: 1070 e DASY52 52.10.1(1476); SEMCAD X 14.6.11(7439) e Dipole E—Field measurement @ 2600MHz/E—Scan — 2600MHz d=15mm/Hearing Aid Compatibility Test (41x181x1): Interpolated grid: dx=0.5000 mm, dy=0.5000 mm Device Reference Point: 0, 0, —6.3 mm Reference Value = 65.15 V/m; Power Drift = 0.00 dB Applied MIF = 0.00 dB RF audio interference level = 38.72 dBV/m Emission category: M2 MIF scaled E—field Grid 1 M2 Grid 2 M2 Grid 3 M2 38.38 dBV/m 38.53 dBV/m Grid 4 M2 Grid 6 M2 37.9 dBV/m m|38.07 dBV/m Grid 7 M2 Grid 8 M2 Grid 9 M2 38.5 dBV/m [38.72 dBV/m|38.63 dBV/m —1.42 —2.84 ~4.27 —5.69 TA 0 dB = 86.32 V/m = 38.72 dBV/m Certificate No: CD2600V3—1017_Aug18 Page 5 of 5

No.I19Z60257-SEM02 Page 61 of 61 The photos of HAC test are presented in the additional document: Appendix to test report No.I19Z60257-SEM02/03 The photos of HAC test ©Copyright. All rights reserved by CTTL.


Document Created: 2019-04-12 09:40:21
Document Modified: 2019-04-12 09:40:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC