TempConfidential_Deadpool User manual SKU 1 ENG version 2

FCC ID: 2AJOTTA-1156

Users Manual

Download: PDF
FCCID_4198184

Get Started Headset connector Nokia x Camera Front camera Flash Fingerprint sensor (only in Nokia x 32GB) Earpiece SIM and memory card slot Google Assistant/ Google search key* USB connector Loudspeaker Microphone Volume keys Power/Lock key *Google Assistant is available in selected markets and languages. Where not TA-1156/TA- EN available Google Assistant is replaced by 1159/TA-1164 Google Search. 1. Insert the SIM and memory Note: On dual SIM capable devices, both SIM1 2. Charge the battery and switch and SIM2 slots support 4G networks. However, if card your SIM1 and SIM2 are both LTE SIM cards, the pri- the phone on mary SIM supports 4G/3G/2G networks, while the 1.Open the SIM and memory card tray: push the secondary SIM can only support 3G/2G. For more Plug a compatible charger into a wall outlet, and tray opener pin in the tray hole and slide the tray information on your SIM cards, contact your service connect the cable to your phone. Your phone sup- out. provider. ports the USB micro-B cable. You can also charge 2.Put the nano-SIM in slot 1 on the tray with the your phone from a computer with a USB cable, but contact area face down. If you have a second SIM, it may take a longer time. put it in slot 2. If the battery is completely discharged, it may take several minutes before the charging indicator is dis- 3.Put the memory card in the memory card slot. played. 4.Slide the tray back in. To switch your phone on, press and hold the power Use only original nano-SIM cards. Use of incompati- key until the phone vibrates. The phone guides you ble SIM cards may damage the card or the device, through the setup. and may corrupt data stored on the card. Use only compatible memory cards approved for use with this device. Incompatible cards may dam- age the card and the device and corrupt data stored on the card. Important: Do not remove the memory card when an app is using it. Doing so may damage the memory card and the device and corrupt data stored on the card. For an online user guide and troubleshooting help, go to www.nokia.com/mobile-support. Both SIM cards are available at the same time when the device is not being used, but while one SIM card is active, for example, making a call, the other may be unavailable.

Product and safety info standards that were developed by independent scientific organization through periodic and thorough evaluation of scientific • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Important: For important info on the safe use of your device and studies. The standards include a substantial safety margin designed • Consult the dealer or an experienced radio/TV technician for help. battery, read the Product and safety info booklet before you take to assure the safety of all persons, regardless of age and health. The your device into use. This device has an electronic label for certification information. To exposure standard for wireless handsets employs a unit of access it, select Settings > System > Certification. You can only use your device on the GSM 850, 900, 1800, 1900; measurement known as the Specific Absorption Rate, or SAR. The WCDMA 1, 5, 8; LTE 1, 3, 5, 7, 8, 20, 28, 38, 40 networks. SAR limit set by the FCC is 1.6 W/kg. The tests are performed in You need a subscription with a service provider. positions and locations (e.g. at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this Important: 4G/LTE might not be supported by your network model handset as reported to the FCC when tested for use at the ear service provider or by the service provider you are using when © 2019 HMD Global. HMD Global Oy is the exclusive licensee of the is 0.27 W/kg for TA-1156, 0.28 W/kg for TA-1159, 0.42 W/kg for TA- Nokia brand for phones & tablets. Nokia is a registered trademark of traveling. In these cases, you may not be able to make or receive 1164, and when worn on the body in a holder or carry case, is 1.2 W/ calls, send or receive messages or use mobile data connections. To Nokia Corporation. kg. Google, Google Assistant and other marks are trademarks of Google make sure your device works seamlessly when full 4G/LTE service is not available, it is recommended that you change the highest Body-worn Operation; This device was tested for typical body-worn LLC. connection speed from 4G to 3G. To do this, on the home screen, tap operations with the handset kept 1.0 cm from the body. To maintain Settings > Network & Internet > Mobile network > Advanced, and compliance with FCC RF exposure requirements, use accessories that The Bluetooth word mark and logos are owned by the Bluetooth SIG, switch Preferred network type to 3G. maintain a 1.0 cm separation distance between the user’s body and Inc. and any use of such marks by HMD Global is under license. the handset. The use of belt clips, holsters and similar accessories For more info, contact your network service provider. should not contain metallic components in its assembly. The use of Maximum transmit power accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC GSM 850, 900 35 dBm has granted an Equipment Authorization for this model handset with GSM 1800, 1900 32 dBm all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model handset is on file WCDMA 1, 5, 8 25 dBm with the FCC and can be found under the FCC ID Search section of LTE 1, 3, 5, 7, 8, 20, 28 25 dBm www.fcc.gov/oet/ea/ after searching on FCC ID 2AJOTTA-1156, 38, 40 2AJOTTA-1159, or 2AJOTTA-1164. Bluetooth® 6.5 dBm Additional information on Specific Absorption Rates (SAR) can be found on the FCC website at www.fcc.gov/general/radio-frequency- WLAN 2.4G 18 dBm safety-0. Your device has an internal, non-removable, rechargeable battery. To send data or messages, a good connection to the network is Do not attempt to remove the battery or back cover, as you may needed. Sending may be delayed until such a connection is available. damage the device. To replace the battery, take the device to the Follow the separation distance instructions until the sending is nearest authorised service facility. finished. Charge your device with the CH-21E (EU plug), CH-21X (UK plug), CH- During general use, the SAR values are usually well below the values 21A (Australia plug), CH-21N (India plug) chargers. HMD Global may stated above. This is because, for purposes of system efficiency and make additional battery or charger models available for this device. to minimise interference on the network, the operating power of your Charging time can vary depending on device capability. Some of the mobile is automatically decreased when full power is not needed for accessories mentioned in this user guide, such as charger, headset, the call. The lower the power output, the lower the SAR value. or data cable, may be sold separately. Device models may have different versions and more than one value. The surface of the device is nickel-free. Component and design changes may occur over time and some changes could affect SAR values. Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic stripe For more info, go to www.sar-tick.com. Note that mobile devices cards near the device for extended periods of time, since the cards may be transmitting even if you are not making a voice call. may be damaged. Your mobile device is also designed to meet the United States Note: Pre-installed system software and apps use a significant Federal Communications Commission (FCC) guidelines. FCC ratings part of memory space. for your device and more information on SAR can be found at http:/ /transition.fcc.gov/oet/rfsafety/sar.html. Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking The World Health Organization (WHO) has stated that current a photo. scientific information does not indicate the need for any special precautions when using mobile devices. If you are interested in reducing your exposure, they recommend you limit your usage or use Certification information (SAR) a hands-free kit to keep the device away from your head and body. For more information and explanations and discussions on RF exposure, go to the WHO website at www.who.int/peh-emf/en. This mobile device meets guidelines for exposure to radio waves as set forth by the Council of Europe (CE). Refer to the following. Copyrights and other notices European RF Exposure Information Your mobile device is a radio transmitter and receiver. It is designed EU Declaration of Conformity not to exceed the limits for exposure to radio waves recommended Hereby, HMD Global Oy declares that this product is in by international guidelines. These guidelines were developed by the compliance with the essential requirements and other independent scientific organization ICNIRP and include safety relevant provisions of Directive 2014/53/EU. A copy of the margins designed to assure the protection of all persons, regardless EU Declaration of Conformity can be found at https:// of age and health. The guidelines use a unit of measurement known www.nokia.com/en_int/phones/declaration-of-conformity. as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2.0 W/kg and the highest SAR FCC notice: value for this device when tested at the ear is 0.24 W/kg* for TA- This device complies with part 15 of the FCC rules. Operation is 1156, 0.32 W/kg* for TA-1159, 0.25 W/kg* for TA-1164. As mobile subject to the following two conditions: (1) This device may not cause devices offer a range of functions, they can be used in other harmful interference, and (2) this device must accept any positions, such as on the body. In this case, the highest tested SAR interference received, including interference that may cause value is 1.63 W/kg* at the separation distance of 0.5 cm from the undesired operation. For more info, go to www.fcc.gov/engineering- body. technology/electromagnetic-compatibility-division/radio- For electronic safety, maintain the separation distance with frequency-safety/faq/rf-safety. Any changes or modifications not accessories containing no metal, that position handset a minimum of expressly approved by HMD Global could void the user’s authority to the above distance. Use of other accessories may not ensure operate this equipment. Note: This equipment has been tested and compliance with RF exposure guidelines. found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide *The tests are carried out in accordance with international guidelines reasonable protection against harmful interference in a residential for testing. installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with This mobile device meets guidelines for exposure to radio waves as the instructions, may cause harmful interference to radio set forth by the Federal Communications Commission (FCC). Refer to communications. However, there is no guarantee that interference the following. will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be FCC RF Exposure Information determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the Your handset is a radio transmitter and receiver. It is designed and following measures: manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications • Reorient or relocate the receiving antenna. Commission of the U.S. Government. The guidelines are based on • Increase the separation between the equipment and receiver.


Document Created: 2019-03-11 16:07:02
Document Modified: 2019-03-11 16:07:02
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC