I18Z62335-IOT12_FCC_Report_Part15C_BLE_Rev0 p

FCC ID: 2AJOTTA-1150

Test Report

Download: PDF
FCCID_4159265

No.I18Z62335-IOT12 Page11of41 6. Test Facilities Utilized Conducted test system Serial Calibration Calibration No. Equipment Model Manufacturer Number Period Due date Vector Signal Rohde & 1 FSQ26 200136 1 year 2019-11-21 Analyzer Schwarz 825562/0 Rohde & 2 LISN ESH3-Z5 1 year 2019-08-22 28 Schwarz Rohde & 3 Test Receiver ESCI 100766 1 year 2019-04-16 Schwarz 4 Shielding Room S81 / ETS-Lindgren / / Radiated emission test system Serial Calibration Calibration No. Equipment Model Manufacturer Number Period Due date 1 Test Receiver ESU26 100376 Rohde & Schwarz 1 year 2019-11-27 2 BiLog Antenna VULB9163 9163-482 Schwarzbeck 1 year 2019-09-21 Dual-Ridge 3 Waveguide Horn 3117 00139065 ETS-Lindgren 1 year 2019-11-15 Antenna Dual-Ridge 4 Waveguide Horn 3116 2663 ETS-Lindgren 3 years 2020-05-31 Antenna Vector Signal 5 FSV40 101047 Rohde & Schwarz 1 year 2019-07-27 Analyzer ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page12of41 7. Measurement Uncertainty 7.1. Peak Output Power - Conducted Measurement Uncertainty: Measurement Uncertainty(k=2) 0.66dB 7.2. Frequency Band Edges Measurement Uncertainty: Measurement Uncertainty(k=2) 0.66dB 7.3. Transmitter Spurious Emission - Conducted Measurement Uncertainty: FrequencyRange Uncertainty(k=2) 30 MHz ~ 8 GHz 1.22dB 8 GHz ~ 12.75 GHz 1.51dB 12.7GHz ~ 26 GHz 1.51dB 7.4. Transmitter Spurious Emission - Radiated Measurement Uncertainty: FrequencyRange Uncertainty(k=2) ＜1 GHz 5.40dB ＞ 1 GHz 4.32dB 7.5. 6dB Bandwidth Measurement Uncertainty: Measurement Uncertainty(k=2) 61.936Hz 7.6. Maximum Power Spectral Density Level Measurement Uncertainty: Measurement Uncertainty(k=2) 0.66dB ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page13of41 7.7. AC Powerline Conducted Emission Measurement Uncertainty: Measurement Uncertainty(k=2) 3.10dB ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page14of41 ANNEX A: Detailed Test Results A.1. Measurement Method A.1.1. Conducted Measurements The measurement is made according to ANSI C63.10. 1). Connect the EUT to the test system correctly. 2). Set the EUT to the required work mode (Transmitter, receiver or transmitter & receiver). 3). Set the EUT to the required channel. 4). Set the EUT hopping mode (hopping or hopping off). 5). Set the spectrum analyzer to start measurement. 6). Record the values. Vector Signal Analyzer Vector Signal EUT Analyzer A.1.2. Radiated Emission Measurements The measurement is made according to ANSI C63.10. The radiated emission test is performed in semi-anechoic chamber. The distance from the EUT to the reference point of measurement antenna is 3m. The test is carried out on both vertical and horizontal polarization and only maximization result of both polarizations is kept. During the test, the turntable is rotated 360° and the measurement antenna is moved from 1m to 4m to get the maximization result. In the case of radiated emission, the used settings are as follows, Sweep frequency from 30 MHz to 1GHz, RBW = 100 kHz, VBW = 300 kHz; Sweep frequency from 1 GHz to 26GHz, RBW = 1MHz, VBW = 1MHz; Receiver Signalling Tester Amp Tower/Table Filter Controller ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page15of41 A.2. Peak Output Power - Conducted Method of Measurement:See ANSI C63.10-clause 11.9.1.1 a) Set the RBW = 1 MHz. b) Set VBW = 3 MHz. c) Set span = 3 MHz. d) Sweep time = auto couple. e) Detector = peak. f) Trace mode = max hold. g) Allow trace to fully stabilize. h) Use peak marker function to determine the peak amplitude level. Measurement Limit： Standard Limit (dBm) FCC Part 15.247(b)(1) < 30 Measurement Results: For GFSK Channel No. Frequency (MHz) Peak Conducted Output Power (dBm) Conclusion 0 2402 -0.94 P 19 2440 -0.08 P 39 2480 -1.68 P Conclusion: PASS ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page16of41 A.3. Frequency Band Edges - Conducted Method of Measurement:See ANSI C63.10-clause6.10.4 Connect the spectrum analyzer to the EUT using an appropriate RF cable connected to the EUT output.Configure the spectrum analyzer settings as described below. a) Set Span = 8MHz b) Sweep Time:Auto c) Set the RBW=100 kHz c)Set the VBW= 300 kHz d)Detector: Peak e) Trace: Max hold Observe the stored trace and measure the amplitude deltabetween the peak of the fundamental and the peak of the band-edge emission. This is not anabsolute field strength measurement; it is only a relative measurement to determine the amount bywhich the emission drops at the band edge relative to the highest fundamental emission level. Measurement Limit: Standard Limit (dBc) FCC 47 CFR Part 15.247 (d) <-20 Measurement Result: For GFSK Channel Frequency Band Edge Power Hopping Conclusion No. (MHz) ( dBc) 0 2402 Hopping OFF Fig.1 -53.39 P 39 2480 Hopping OFF Fig.2 -55.38 P Conclusion: PASS ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page17of41 Test graphs as below Fig.1. Frequency Band Edges: GFSK, 2402 MHz, Hopping Off Fig.2. Frequency Band Edges: GFSK, 2480 MHz, Hopping Off ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page18of41 A.4. Transmitter Spurious Emission-Conducted Method of Measurement:See ANSI C63.10-clause 11.11.2 and clause 11.11.3 Measurement Procedure – Reference Level 1. Set the RBW = 100 kHz. 2. Set the VBW = 300 kHz. 3. Set the span to ≥1.5 times the DTS bandwidth. 4. Detector = peak. 5. Sweep time = auto couple. 6. Trace mode = max hold. 7. Allow trace to fully stabilize. 8. Use the peak marker function to determine the maximum PSDlevel.Next, determine the power in 100 kHz band segments outside of the authorized frequency bandusing the following measurement: Measurement Procedure - Unwanted Emissions 1. Set RBW = 100 kHz. 2. Set VBW = 300 kHz. 3. Set span to encompass the spectrum to be examined. 4. Detector = peak. 5. Trace Mode = max hold. 6. Sweep = auto couple. 7. Allow the trace to stabilize (this may take some time, depending on the extent of thespan). Ensure that the amplitude of all unwanted emissions outside of the authorized frequency band(excluding restricted frequency bands) is attenuated by at least the minimum requirementsspecified above. Measurement Limit: Standard Limit 20dB below peak output power in 100 kHz FCC 47 CFR Part 15.247 (d) bandwidth ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page19of41 Measurement Results: For GFSK Channel No. Frequency (MHz) Frequency Range Test Results Conclusion Center Frequency Fig.3 P 30 MHz ~ 1 GHz Fig.4 P 0 2402 1 GHz ~ 3 GHz Fig.5 P 3 GHz ~ 10 GHz Fig.6 P 10GHz ~ 26 GHz Fig.7 P Center Frequency Fig.8 P 30 MHz ~ 1 GHz Fig.9 P 19 2440 1 GHz ~ 3 GHz Fig.10 P 3 GHz ~ 10 GHz Fig.11 P 10GHz ~ 26 GHz Fig.12 P Center Frequency Fig.13 P 30 MHz ~ 1 GHz Fig.14 P 39 2480 1 GHz ~ 3GHz Fig.15 P 3 GHz ~ 10 GHz Fig.16 P 10 GHz ~ 26 GHz Fig.17 P Conclusion: PASS Test graphs as below Fig.3. Transmitter Spurious Emission -Conducted: GFSK,2402MHz ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page20of41 Fig.4. Transmitter Spurious Emission -Conducted: GFSK, 2402 MHz, 30MHz - 1GHz Fig.5. Transmitter Spurious Emission -Conducted: GFSK, 2402 MHz,1GHz - 3GHz ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page21of41 Fig.6. Transmitter Spurious Emission -Conducted: GFSK, 2402 MHz,3GHz - 10GHz Fig.7. Transmitter Spurious Emission -Conducted: GFSK, 2402 MHz,10GHz - 26GHz ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page22of41 Fig.8. Transmitter Spurious Emission -Conducted: GFSK, 2440MHz Fig.9. Transmitter Spurious Emission -Conducted: GFSK, 2440 MHz, 30MHz - 1GHz ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page23of41 Fig.10. Transmitter Spurious Emission -Conducted: GFSK, 2440 MHz, 1GHz – 3GHz Fig.11. Transmitter Spurious Emission -Conducted: GFSK, 2440 MHz, 3GHz – 10GHz ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page24of41 Fig.12. Transmitter Spurious Emission -Conducted: GFSK, 2440 MHz, 10GHz – 26GHz Fig.13. Transmitter Spurious Emission -Conducted: GFSK, 2480 MHz ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page25of41 Fig.14. Transmitter Spurious Emission -Conducted: GFSK, 2480 MHz, 30MHz - 1GHz Fig.15. Transmitter Spurious Emission -Conducted: GFSK, 2480 MHz, 1GHz - 3GHz ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page26of41 Fig.16. Transmitter Spurious Emission -Conducted:GFSK, 2480 MHz,3GHz - 10GHz Fig.17. Transmitter Spurious Emission -Conducted: GFSK, 2480 MHz, 10GHz - 26GHz ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page27of41 A.5. Transmitter Spurious Emission - Radiated Measurement Limit: Standard Limit FCC 47 CFR Part 15.247, 15.205, 15.209 20dB below peak output power In addition, radiated emissions which fall in the restricted bands, as defined in § 15.205(a), must also comply with the radiated emission limits specified in § 15.209(a) (see § 15.205(c)). The measurement is made according to ANSI C63.10 Limit in restricted band: Frequency of emission Field strength(uV/m) Field strength(dBuV/m) (MHz) 30-88 100 40 88-216 150 43.5 216-960 200 46 Above 960 500 54 Test Condition The EUT was placed on a non-conductive table. The measurement antenna was placed at a distance of 3 meters from the EUT. During the tests, the antenna height and the EUT azimuth were varied in order to identify the maximum level of emissions from the EUT. This maximization process was repeated with the EUT positioned in each of its three orthogonal orientations. Frequency of emission RBW/VBW Sweep Time(s) (MHz) 30-1000 100KHz/300KHz 5 1000-4000 1MHz/1MHz 15 4000-18000 1MHz/1MHz 40 18000-26500 1MHz/1MHz 20 Measurement Results: A "reference path loss" is established and the ARpl is the attenuation of “reference path loss”, and including the gain of receive antenna, the gain of the preamplifier, the cable loss. The measurement results are obtained as described below: Result=PMea+ARpl For GFSK Frequency Frequency Range Test Results Conclusion Power 2.38GHz~2.4GHz---L Fig.18 P Power 2.45GHz~2.5GHz---H Fig.19 P ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page28of41 GFSK 2402MHz–Average Measurement Cable Antenna Receiver Antenna Antenna Turntable Frequency Limit Margin Result loss Factor Reading Pol. Height angle (MHz) (dBμV/m) (dB) (dBμV/m) (dB) (dB/m) (dBμV) (H/V) (cm) (deg) 2386.000 46.18 2.9 32.0 11.30 54.0 7.8 H 155 6 2387.300 46.20 2.9 32.0 11.34 54.0 7.8 H 155 48 4804.000 33.45 -32.9 34.5 31.80 54.0 20.6 H 155 92 7206.000 37.08 -31.6 36.1 32.61 54.0 16.9 H 155 48 9608.000 41.10 -30.0 37.0 34.15 54.0 12.9 H 155 68 12010.000 42.31 -29.8 39.3 32.84 54.0 11.7 H 155 92 GFSK 2440MHz–Average Measurement Cable Antenna Receiver Antenna Antenna Turntable Frequency Limit Margin Result loss Factor Reading Pol. Height angle (MHz) (dBμV/m) (dB) (dBμV/m) (dB) (dB/m) (dBμV) (H/V) (cm) (deg) 2436.500 46.32 2.9 32.0 11.42 54.0 7.7 H 155 175 2443.200 46.45 2.9 32.2 11.37 54.0 7.6 H 155 5 4882.000 33.06 -32.7 34.5 31.27 54.0 20.9 H 155 26 7323.000 38.37 -31.9 36.1 34.21 54.0 15.6 H 155 355 9764.000 39.21 -30.6 37.2 32.58 54.0 14.8 H 155 6 12205.000 44.17 -29.4 39.2 34.38 54.0 9.8 H 155 12 GFSK 2480MHz–Average Measurement Cable Antenna Receiver Antenna Antenna Turntable Frequency Limit Margin Result loss Factor Reading Pol. Height angle (MHz) (dBμV/m) (dB) (dBμV/m) (dB) (dB/m) (dBμV) (H/V) (cm) (deg) 2483.500 46.35 2.9 32.8 10.66 54.0 7.7 H 155 175 2499.700 46.31 2.9 32.3 11.06 54.0 7.7 H 155 194 4960.000 33.74 -33.4 34.5 32.61 54.0 20.3 H 155 215 7440.000 37.41 -31.8 36.0 33.15 54.0 16.6 H 155 196 9920.000 42.18 -29.9 37.4 34.71 54.0 11.8 H 155 241 12400.000 43.47 -29.5 39.1 33.85 54.0 10.5 H 155 259 GFSK 2402MHz–Peak ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page29of41 Measurement Cable Antenna Receiver Antenna Antenna Turntable Frequency Limit Margin Result loss Factor Reading Pol. Height angle (MHz) (dBμV/m) (dB) (dBμV/m) (dB) (dB/m) (dBμV) (H/V) (cm) (deg) 2386.104 59.90 2.9 32.0 25.02 74.0 14.1 H 155 0 2387.042 61.07 2.9 32.0 26.20 74.0 12.9 H 155 44 4803.750 40.82 -32.9 34.5 39.17 74.0 33.2 V 155 88 7206.000 42.33 -31.6 36.1 37.86 74.0 31.7 V 155 44 9608.250 46.77 -30.0 37.0 39.82 74.0 27.2 V 155 66 12009.750 47.66 -29.8 39.3 38.18 74.0 26.3 H 155 88 GFSK 2440MHz–Peak Measurement Cable Antenna Receiver Antenna Antenna Turntable Frequency Limit Margin Result loss Factor Reading Pol. Height angle (MHz) (dBμV/m) (dB) (dBμV/m) (dB) (dB/m) (dBμV) (H/V) (cm) (deg) 2330.000 48.42 -27.7 31.3 44.84 74.0 25.6 H 155 176 2746.832 50.61 -26.6 33.0 44.18 74.0 23.4 H 155 0 4881.750 39.89 -32.7 34.5 38.11 74.0 34.1 V 155 22 7323.000 43.85 -31.9 36.1 39.69 74.0 30.2 V 155 352 9764.250 44.94 -30.6 37.2 38.31 74.0 29.1 V 155 0 12204.750 48.30 -29.4 39.2 38.51 74.0 25.7 V 155 0 GFSK 2480MHz–Peak Measurement Cable Antenna Receiver Antenna Antenna Turntable Frequency Limit Margin Result loss Factor Reading Pol. Height angle (MHz) (dBμV/m) (dB) (dBμV/m) (dB) (dB/m) (dBμV) (H/V) (cm) (deg) 2484.980 60.16 2.9 32.7 24.51 74.0 13.8 V 155 176 2492.320 60.13 2.9 32.5 24.67 74.0 13.9 H 155 198 4959.750 41.16 -33.4 34.5 40.03 74.0 32.8 V 155 220 7440.000 43.02 -31.8 36.0 38.76 74.0 31.0 H 155 198 9920.250 48.04 -29.9 37.4 40.57 74.0 26.0 H 155 242 12399.750 47.34 -29.5 39.1 37.71 74.0 26.7 V 155 264 Conclusion: PASS Test graphs as below: ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page30of41 R E - P o w e r-2 .3 8 G H z -2 .4 5 G H z 100 90 80 P a rt 1 5 P K 70 2 .3 8 7 0 4 2 0 0 0 G H z Level in dBµV/m 6 1 .0 6 9 d B µ V / m 60 P a2rt.31859 9A9V6 0 0 0 G H z 4 6 .7 2 5 d B µ V / m 50 40 30 20 23 80 23 90 24 00 24 10 24 20 24 30 24 40 24 50 F re q u e n c y in M H z Fig.18. Transmitter Spurious Emission -Radiated (Power): GFSK low channel R E - P o w e r-2 .4 5 G H z -2 .5 G H z 100 95 90 85 80 75 P a rt 1 5 C P K Level in dBµV/m 70 2 .4 8 4 9 8 0 0 0 0 G H z 65 6 0 .1 5 8 d B µ V / m 60 55 P a rt 1 5 C AV 2 .4 8 3 5 0 0 0 0 0 G H z 50 4 6 .8 0 1 d B µ V / m 45 40 35 30 24 50 24 60 24 70 24 80 24 90 25 00 F re q u e n c y in M H z Fig.19. Transmitter Spurious Emission -Radiated (Power): GFSK high channel ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page31of41 A.6. 6dB Bandwidth Method of Measurement: The measurement is made according to ANSI C63.10 clause11.8.1 1.Set RBW = 100 kHz. 2. Set the video bandwidth (VBW) = 300 kHz. 3. Detector = Peak. 4. Trace mode = max hold. 5. Sweep = auto couple. 6. Allow the trace to stabilize. 7. Measure the maximum width of the emission that is constrained by the frequencies associated with the two outermost amplitude points (upper and lower frequencies) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission. Measurement Limit: Standard Limit FCC 47 CFR Part 15.247(a)(2) >= 500KHz Measurement Results: For GFSK Channel No. Frequency (MHz) 6dB Bandwidth (kHz) Conclusion 0 2402 Fig.20 675.50 P 19 2440 Fig.21 671.50 P 39 2480 Fig.22 676.00 P Conclusion: PASS Test graphs as below: ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page32of41 Fig.20. 6dB Bandwidth: GFSK, 2402 MHz Fig.21. 6dB Bandwidth: GFSK, 2440 MHz ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page33of41 Fig.22. 6dB Bandwidth: GFSK, 2480 MHz ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page34of41 A.7. Maximum Power Spectral Density Level Method of Measurement: The measurement is made according to ANSI C63.10 clause 11.10.2 1. Set the RBW = 3 kHz. 2. Set the VBW =10 kHz. 3. Set the span to 2 times the DTS bandwidth. 4. Detector = peak. 5. Sweep time = auto couple. 6. Trace mode = max hold. 7. Allow trace to fully stabilize. 8. Use the peak marker function to determine the maximum amplitude level within the RBW. Measurement Limit: Standard Limit FCC 47 CFR Part 15.247(e) <=8.0dBm/3kHz Measurement Results: For GFSK Maximum Power Spectral Density Channel No. Frequency (MHz) Conclusion Level(dBm/3kHz) 0 2402 Fig.23 -18.26 P 19 2440 Fig.24 -16.82 P 39 2480 Fig.25 -18.05 P Test graphs as below: ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page35of41 Fig.23. Maximum Power Spectral Density Level Function: GFSK, 2402 MHz Fig.24. Maximum Power Spectral Density Level Function: GFSK, 2440 MHz ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page36of41 Fig.25. Maximum Power Spectral Density Level Function: GFSK, 2480 MHz ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page37of41 A.8. AC Powerline Conducted Emission Method of Measurement:See ANSI C63.10-clause 6.2 1. the one EUT cable configuration and arrangement and mode of operation that produced the emission with the highest amplitude relative to the limit is selected for the final measurement, while applying the appropriate modulating signal to the EUT. 2. If the EUT is relocated from an exploratory test site to a final test site, the highest emissions shall be remaximized at the final test location before final ac power-line conducted emission measurements are performed. 3. The final test on all current-carrying conductors of all of the power cords to the equipment that comprises the EUT (but not the cords associated with other non-EUT equipment in the system) is then performed for the full frequency range for which the EUT is being tested for compliance without further variation of the EUT arrangement, cable positions, or EUT mode of operation. 4. If the EUT is comprised of equipment units that have their own separate ac power connections, e.g., floor-standing equipment with independent power cords for each shelf that are able to connect directly to the ac power network, each current-carrying conductor of one unit is measured while the other units are connected to a second (or more) LISN(s). All units shall be separately measured. If a power strip is provided by the manufacturer, to supply all of the units making up the EUT, only the conductors in the power cord of the power strip shall be measured. 5. If the EUT uses a detachable antenna, these measurements shall be made with a suitable dummy load connected to the antenna output terminals; otherwise, the tests shall be made with the antenna connected and, if adjustable, fully extended. When measuring the ac conducted emissions from a device that operates between 150 kHz and 30 MHz a non-detachable antenna may be replaced with a dummy load for the measurements within the fundamental emission band of the transmitter, but only for those measurements.36 Record the six highest EUT emissions relative to the limit of each of the current-carrying conductors of the power cords of the equipment that comprises the EUT over the frequency range specified by the procuring or regulatory agency. Diagram or photograph the test setup that was used. See Clause 8 for full reporting requirements. Test Condition Voltage（V） Frequency（Hz） 120 60 Measurement Result and limit: Bluetooth (Quasi-peak Limit) Frequency range(MHz) Quasi-peak Limit (dBV) Conclusion 0.15 to 0.5 66 to 56 0.5 to 5 56 P 5 to 30 60 NOTE: The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.5 MHz. ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page38of41 Bluetooth (Average Limit) Frequency range Average Limit (dBV) Conclusion (MHz) 0.15 to 0.5 56 to 46 0.5 to 5 46 P 5 to 30 50 NOTE: The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.5 MHz. The measurement is made according to ANSI C63.10 Conclusion: PASS Test graphs as below: ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page39of41 Traffic: 70 65 EN 5 502 2 Vol t age on Mai ns QP 60 55 EN 5 502 2 Vol t age on Mai ns AV 50 45 Level in dBuV 40 35 30 25 20 15 10 5 0 150 k 30 0 40 0 50 0 80 0 1M 2M 3M 4M 5M 6 8 10M 20 M 30 M F re q u e n c y in H z Final Result 1 Frequency QuasiPeak Meas. Time Bandwidth PE Line Corr. Margin Limit (MHz) (dBµV) (ms) (kHz) (dB) (dB) (dBµV) 1.261500 45.8 2000.0 9.000 GND L1 10.4 10.2 56.0 2.188500 47.3 2000.0 9.000 GND L1 10.4 8.7 56.0 2.256000 49.9 2000.0 9.000 GND L1 10.4 6.1 56.0 2.323500 50.4 2000.0 9.000 GND L1 10.4 5.6 56.0 2.391000 50.7 2000.0 9.000 GND L1 10.4 5.3 56.0 2.458500 49.6 2000.0 9.000 GND L1 10.4 6.4 56.0 Final Result 2 Frequency QuasiPeak Meas. Time Bandwidth PE Line Corr. Margin Limit (MHz) (dBµV) (ms) (kHz) (dB) (dB) (dBµV) 0.532500 39.4 2000.0 9.000 GND N 10.3 6.6 46.0 1.338000 39.2 2000.0 9.000 GND N 10.3 6.8 46.0 1.401000 39.7 2000.0 9.000 GND N 10.4 6.3 46.0 2.265000 39.8 2000.0 9.000 GND L1 10.4 6.2 46.0 2.328000 41.0 2000.0 9.000 GND L1 10.4 5.0 46.0 2.395500 40.5 2000.0 9.000 GND L1 10.4 5.5 46.0 ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page40of41 Idle: 70 65 EN 5 502 2 Vol t age on Mai ns QP 60 55 EN 5 502 2 Vol t age on Mai ns AV 50 45 Level in dBuV 40 35 30 25 20 15 10 5 0 150 k 30 0 40 0 50 0 80 0 1M 2M 3M 4M 5M 6 8 10M 20 M 30 M F re q u e n c y in H z Final Result 1 Frequency QuasiPeak Meas. Time Bandwidth PE Line Corr. Margin Limit (MHz) (dBµV) (ms) (kHz) (dB) (dB) (dBµV) 1.261500 45.5 2000.0 9.000 GND L1 10.4 10.5 56.0 2.256000 50.0 2000.0 9.000 GND L1 10.4 6.0 56.0 2.323500 50.6 2000.0 9.000 GND L1 10.4 5.4 56.0 2.395500 51.0 2000.0 9.000 GND L1 10.4 5.0 56.0 2.454000 49.8 2000.0 9.000 GND L1 10.4 6.2 56.0 2.517000 48.0 2000.0 9.000 GND L1 10.4 8.0 56.0 Final Result 2 Frequency QuasiPeak Meas. Time Bandwidth PE Line Corr. Margin Limit (MHz) (dBµV) (ms) (kHz) (dB) (dB) (dBµV) 0.532500 38.7 2000.0 9.000 GND N 10.3 7.3 46.0 1.338000 39.0 2000.0 9.000 GND N 10.3 7.0 46.0 1.401000 39.5 2000.0 9.000 GND N 10.4 6.5 46.0 1.464000 39.0 2000.0 9.000 GND N 10.4 7.0 46.0 2.332500 41.0 2000.0 9.000 GND L1 10.4 5.0 46.0 2.395500 39.8 2000.0 9.000 GND L1 10.4 6.2 46.0 ©Copyright. All rights reserved by CTTL.

No.I18Z62335-IOT12 Page41of41 ANNEX E: Accreditation Certificate ***END OF REPORT*** ©Copyright. All rights reserved by CTTL.


Document Created: 2019-02-02 09:24:06
Document Modified: 2019-02-02 09:24:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC