User manual

FCC ID: 2AJOTTA-1115

Users Manual

Download: PDF
FCCID_4026488

Headset connector Get Started Front camera Nokia xx Camera Flash Fingerprint Earpiece sensor SIM and memory card slots Ambient light sensor USB connector Loudspeaker Microphone Volume keys Power/Lock key TA-1113/TA-1115 EN-LATAM 1. Insert the SIM and memory 2. Charge the battery and switch card the phone on 1. Open the SIM and memory card tray: push the Plug a compatible charger into a wall outlet, and tray opener pin in the tray hole and slide the tray connect the cable to your phone. Your phone sup- out. ports the USB micro-B cable. You can also charge 2. Put a nano-SIM and a memory card on the tray your phone from a computer with a USB cable, but with the contact areas face down. it may take a longer time. If the battery is completely discharged, it may take 3. If you have a second SIM card, open the SIM card several minutes before the charging indicator is dis- tray: push the tray opener pin in the tray hole and played. slide the tray out. To switch your phone on, press and hold the power 4. Turn the tray upside down and put a nano-SIM key until the phone vibrates. The phone guides you card on the tray with the contact area face up. through the setup. 5.Turn the tray back up. 6. Slide the trays back in their slots. Use only original nano-SIM cards. Use of incompati- ble SIM cards may damage the card or the device, SIM1 SIM2 and may corrupt data stored on the card. Use only compatible memory cards approved for use with this device. Incompatible cards may dam- age the card and the device and corrupt data stored on the card. For an online user guide and troubleshooting help, go to www.nokia.com/mobile-support. Important: Do not remove the memory card when an app is using it. Doing so may damage the memory card and the device and corrupt data stored on the card. Both SIM cards are available at the same time when the device is not being used, but while one SIM card is active, for example, making a call, the other may be unavailable.

Product and safety info positions and locations (e.g. at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this Important: For important info on the safe use of your device and model handset as reported to the FCC when tested for use at the ear battery, read the Product and safety info booklet before you take is 1,18 W/kg, and when worn on the body in a holder or carry case, is your device into use. 1,19 W/kg. You can only use your device on the GSM 850, 900, 1800, 1900; Body-worn Operation; This device was tested for typical body-worn WCDMA 1, 2, 4, 5, 8; LTE 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 28, 38, 40, 66 operations with the handset kept 1,0 cm from the body. To maintain networks. compliance with FCC RF exposure requirements, use accessories that You need a subscription with a service provider. maintain a 1,0 cm separation distance between the user’s body and Important: 4G/LTE might not be supported by your network the handset. The use of belt clips, holsters and similar accessories service provider or by the service provider you are using when should not contain metallic components in its assembly. The use of traveling. In these cases, you may not be able to make or receive accessories that do not satisfy these requirements may not comply calls, send or receive messages or use mobile data connections. To with FCC RF exposure requirements, and should be avoided. The FCC make sure your device works seamlessly when full 4G/LTE service is has granted an Equipment Authorization for this model handset with not available, it is recommended that you change the highest all reported SAR levels evaluated as in compliance with the FCC RF connection speed from 4G to 3G. To do this, on the home screen, tap emission guidelines. SAR information on this model handset is on file Settings > Network & Internet > Mobile network > Advanced, and with the FCC and can be found under the FCC ID Search section of switch Preferred network type to 3G. www.fcc.gov/oet/ea/ after searching on FCC ID 2AJOTTA-1113 or 2AJOTTA-1115. For more info, contact your network service provider. Additional information on Specific Absorption Rates (SAR) can be Your device has an internal, non-removable, rechargeable battery. found on the FCC website at www.fcc.gov/general/radio-frequency- Do not attempt to remove the battery or back cover, as you may safety-0. damage the device. To replace the battery, take the device to the nearest authorised service facility. To send data or messages, a good connection to the network is needed. Sending may be delayed until such a connection is available. Charge your device with the AD-10WC (CN plug)/AD-10WE and Follow the separation distance instructions until the sending is FC0100 (EU plug)/AD-10WX (UK plug)/AD-10WN (India plug)/AD- finished. 10WU and FC0102 (US plug)/AD-10WR and FC0108 (Argentina plug)/ AD-10WA and FC0103 (Australia plug) chargers. HMD Global may During general use, the SAR values are usually well below the values make additional battery or charger models available for this device. stated above. This is because, for purposes of system efficiency and Charging time can vary depending on device capability. Some of the to minimise interference on the network, the operating power of your accessories mentioned in this user guide, such as charger, headset, mobile is automatically decreased when full power is not needed for or data cable, may be sold separately. the call. The lower the power output, the lower the SAR value. Electrical Information of the Charger Device models may have different versions and more than one value. Component and design changes may occur over time and some The following electrical information corresponds to the above- changes could affect SAR values. mentioned charger models: For more info, go to www.sar-tick.com. Note that mobile devices Input: 100-240Vca, 50/60Hz, 0,3A may be transmitting even if you are not making a voice call. Output: 5Vcc 2A Your mobile device is also designed to meet the United States Charger safety instructions Federal Communications Commission (FCC) guidelines. FCC ratings The charger is suitable to be used only with compatible devices. for your device and more information on SAR can be found at http:/ /transition.fcc.gov/oet/rfsafety/sar.html. The charger should not be used in extremely high or low temperatures. The World Health Organization (WHO) has stated that current scientific information does not indicate the need for any special Ventilation should not be obstructed by covering the charger with precautions when using mobile devices. If you are interested in magazines, blankets, curtains etc. reducing your exposure, they recommend you limit your usage or use Open flames, such as candles, should not be placed above the a hands-free kit to keep the device away from your head and body. charger. For more information and explanations and discussions on RF The charger and the wall outlet shall be easily accessible at all times. exposure, go to the WHO website at www.who.int/peh-emf/en. In case the cable or the plugs are damaged, stop using it. The charger requires very low maintenance. If you want to clean it, Copyrights and other notices use a dry cloth or a brush. Meaning of the symbols: FCC notice: For internal use only This device complies with part 15 of the FCC rules. Operation is The charger should not be disposed as unsorted municipal subject to the following two conditions: (1) This device may not cause waste. It should be recycled. harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For more info, go to www.fcc.gov/engineering- The surface of the device is nickel-free. technology/electromagnetic-compatibility-division/radio- Parts of the device are magnetic. Metallic materials may be attracted frequency-safety/faq/rf-safety. Any changes or modifications not to the device. Do not place credit cards or other magnetic stripe expressly approved by HMD Global could void the user’s authority to cards near the device for extended periods of time, since the cards operate this equipment. Note: This equipment has been tested and may be damaged. found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide Note: Pre-installed system software and apps use a significant reasonable protection against harmful interference in a residential part of memory space. installation. This equipment generates, uses and can radiate radio Keep a safe distance when using the flash. Do not use the flash on frequency energy and, if not installed and used in accordance with people or animals at close range. Do not cover the flash while taking the instructions, may cause harmful interference to radio a photo. communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be Certification information (SAR) determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. This mobile device meets guidelines for exposure to radio waves as • Increase the separation between the equipment and receiver. set forth by the Federal Communications Commission (FCC). Refer to • Connect the equipment into an outlet on a circuit different from the following. that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Information This device has an electronic label for certification information. To Your handset is a radio transmitter and receiver. It is designed and access it, select Settings > System > Certification. manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientific organization through periodic and thorough evaluation of scientific © 2018 HMD Global. All rights reserved. HMD Global Oy is the studies. The standards include a substantial safety margin designed exclusive licensee of the Nokia brand for phones & tablets. Nokia is a to assure the safety of all persons, regardless of age and health. The registered trademark of Nokia Corporation. exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1,6 W/kg. The tests are performed in


Document Created: 2019-04-05 23:13:51
Document Modified: 2019-04-05 23:13:51
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC