User Manual

FCC ID: 2AJOTTA-1100

Users Manual

Download: PDF
FCCID_3961050

Get Started Headset connector Nokia x Main camera Microphone Front camera Flash Fingerprint Earpiece sensor Proximity sensor SIM and memory card slot USB connector Loudspeaker Microphone Volume keys Power/Lock key TA-1095/TA-1100 EN-EMEA 1. Insert the SIM and memory 2. Charge the battery and switch card the phone on 1. Open the SIM and memory card tray: push the Plug a compatible charger into a wall outlet, and tray opener pin in the tray hole and slide the tray connect the cable to your phone. Your phone out. supports the USB-C cable. You can also charge your 2. If you have a single-SIM phone, put a nano-SIM phone from a computer with a USB cable, but it may card in slot 1 and a memory card in slot 2 on the take a longer time. tray with the contact areas face down. If you have a If the battery is completely discharged, it may take dual-SIM phone, put a nano-SIM card in slot 1 and several minutes before the charging indicator is either a second SIM or a memory card in slot 2 with displayed. the contact areas face down. 3. Slide the tray back in the slot. To switch your phone on, press and hold the power Use only original nano-SIM cards. Use of incompati- key until the phone vibrates. The phone guides you ble SIM cards may damage the card or the device, through the setup. and may corrupt data stored on the card. Use only compatible memory cards approved for use with this device. Incompatible cards may dam- age the card and the device and corrupt data stored on the card. Important: Do not remove the memory card when an app is using it. Doing so may damage the USB-C USB micro-B memory card and the device and corrupt data stored on the card. For an online user guide and troubleshooting help, go to www.nokia.com/mobile-support. Both SIM cards are available at the same time when the device is not being used, but while one SIM card is active, for example, making a call, the other may be unavailable.

Product and safety info organization through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed the Bluetooth SIG, Inc. and any use of such marks by HMD Global is under license. Important: For important info on the safe use of your device and to assure the safety of all persons, regardless of age and health. The battery, read the Product and safety info booklet before you take exposure standard for wireless handsets employs a unit of your device into use. measurement known as the Specific Absorption Rate, or SAR. The You can only use your device on the GSM 850, 900, 1800, 1900; SAR limit set by the FCC is 1.6 W/kg. The tests are performed in WCDMA 1, 2, 5, 8; LTE 1, 3, 5, 7, 8, 20, 38, 40 networks. positions and locations (e.g. at the ear and worn on the body) as You need a subscription with a service provider. required by the FCC for each model. The highest SAR value for this model handset as reported to the FCC when tested for use at the ear Important: 4G/LTE might not be supported by your network is 0.37 W/kg, and when worn on the body in a holder or carry case, is service provider or by the service provider you are using when 0.64 W/kg. traveling. In these cases, you may not be able to make or receive calls, send or receive messages or use mobile data connections. To Body-worn Operation; This device was tested for typical body-worn make sure your device works seamlessly when full 4G/LTE service is operations with the handset kept 1.5 cm from the body. To maintain not available, it is recommended that you change the highest compliance with FCC RF exposure requirements, use accessories that connection speed from 4G to 3G. To do this, on the home screen, tap maintain a 1.5 cm separation distance between the user’s body and Settings > Network & Internet > Mobile network > Advanced, and the handset. The use of belt clips, holsters and similar accessories switch Preferred network type to 3G. should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply For more info, contact your network service provider. with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this model handset with Maximum transmit power all reported SAR levels evaluated as in compliance with the FCC RF GSM 850, 900 35 dBm emission guidelines. SAR information on this model handset is on file with the FCC and can be found under the FCC ID Search section of GSM 1800, 1900 32 dBm www.fcc.gov/oet/ea/ after searching on FCC ID 2AJOTTA-1095 or WCDMA 1, 2, 5, 8 25 dBm 2AJOTTA-1100. Additional information on Specific Absorption Rates (SAR) can be LTE 1, 3, 5, 7, 8, 20, 25 dBm found on the FCC website at www.fcc.gov/general/radio-frequency- 38, 40 safety-0. Bluetooth® 20 dBm To send data or messages, a good connection to the network is WLAN 2.4G 19 dBm needed. Sending may be delayed until such a connection is available. Follow the separation distance instructions until the sending is WLAN 5G 14 dBm finished. NFC 42 dBμA/m @10m During general use, the SAR values are usually well below the values stated above. This is because, for purposes of system efficiency and Your device has an internal, non-removable, rechargeable battery. to minimise interference on the network, the operating power of your Do not attempt to remove the battery or back cover, as you may mobile is automatically decreased when full power is not needed for damage the device. To replace the battery, take the device to the the call. The lower the power output, the lower the SAR value. nearest authorised service facility. Device models may have different versions and more than one value. Charge your device with the AD-18WE (EU plug)/AD-18WX (UK plug)/ Component and design changes may occur over time and some AD-18WU (US plug)/AD-18WR (Argentina plug)/AD-18WA and changes could affect SAR values. FC0303 (Australia plug)/AD-18WN (India plug) chargers. HMD Global may make additional battery or charger models available for this For more info, go to www.sar-tick.com. Note that mobile devices device. Charging time can vary depending on device capability. Some may be transmitting even if you are not making a voice call. of the accessories mentioned in this user guide, such as charger, Your mobile device is also designed to meet the United States headset, or data cable, may be sold separately. Federal Communications Commission (FCC) guidelines. FCC ratings The surface of the device is nickel-free. for your device and more information on SAR can be found at http:/ /transition.fcc.gov/oet/rfsafety/sar.html. Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic stripe The World Health Organization (WHO) has stated that current cards near the device for extended periods of time, since the cards scientific information does not indicate the need for any special may be damaged. precautions when using mobile devices. If you are interested in reducing your exposure, they recommend you limit your usage or use Note: Pre-installed system software and apps use a significant a hands-free kit to keep the device away from your head and body. part of memory space. For more information and explanations and discussions on RF Keep a safe distance when using the flash. Do not use the flash on exposure, go to the WHO website at www.who.int/peh-emf/en. people or animals at close range. Do not cover the flash while taking a photo. Note: The device is restricted to indoor use only when operating Copyrights and other notices in the 5150 to 5350 MHz frequency range in the following countries: EU Declaration of Conformity AT BE BG HR CY CZ DK Hereby, HMD Global Oy declares that this product is in compliance with the essential requirements and other EE FI FR DE EL HU IE relevant provisions of Directive 2014/53/EU. A copy of the IT LV LT LU MT NL PL EU Declaration of Conformity can be found at https:// www.nokia.com/en_int/phones/declaration-of-conformity. PT RO SK SI ES SE UK FCC notice: Certification information This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause (SAR) harmful interference, and (2) this device must accept any interference received, including interference that may cause This mobile device meets guidelines for exposure to radio waves as undesired operation. For more info, go to www.fcc.gov/engineering- set forth by the Council of Europe (CE). Refer to the following. technology/electromagnetic-compatibility-division/radio- frequency-safety/faq/rf-safety. Any changes or modifications not European RF Exposure Information expressly approved by HMD Global could void the user’s authority to Your mobile device is a radio transmitter and receiver. It is designed operate this equipment. Note: This equipment has been tested and not to exceed the limits for exposure to radio waves recommended found to comply with the limits for a Class B digital device, pursuant by international guidelines. These guidelines were developed by the to part 15 of the FCC Rules. These limits are designed to provide independent scientific organization ICNIRP and include safety reasonable protection against harmful interference in a residential margins designed to assure the protection of all persons, regardless installation. This equipment generates, uses and can radiate radio of age and health. The guidelines use a unit of measurement known frequency energy and, if not installed and used in accordance with as the Specific Absorption Rate, or SAR. the instructions, may cause harmful interference to radio The SAR limit for mobile devices is 2.0 W/kg and the highest SAR communications. However, there is no guarantee that interference value for this device when tested at the ear is 0.26 W/kg*. As mobile will not occur in a particular installation. If this equipment does cause devices offer a range of functions, they can be used in other harmful interference to radio or television reception, which can be positions, such as on the body. In this case, the highest tested SAR determined by turning the equipment off and on, the user is value is 1.74 W/kg* at the separation distance of 0.5 cm from the encouraged to try to correct the interference by one or more of the body. following measures: For electronic safety, maintain the separation distance with • Reorient or relocate the receiving antenna. accessories containing no metal, that position handset a minimum of • Increase the separation between the equipment and receiver. the above distance. Use of other accessories may not ensure • Connect the equipment into an outlet on a circuit different from compliance with RF exposure guidelines. that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. *The tests are carried out in accordance with international guidelines for testing. This device has an electronic label for certification information. To access it, select Settings > System > Certification. This mobile device meets guidelines for exposure to radio waves as set forth by the Federal Communications Commission (FCC). Refer to the following. © 2018 HMD Global. All rights reserved. HMD Global Oy is the FCC RF Exposure Information exclusive licensee of the Nokia brand for phones & tablets. Nokia is a Your handset is a radio transmitter and receiver. It is designed and registered trademark of Nokia Corporation. Qualcomm and manufactured not to exceed the emission limits for exposure to radio Snapdragon are trademarks of Qualcomm Incorporated, registered frequency (RF) energy set by the Federal Communications in the United States and other countries. ZEISS and ZEISS logo are Commission of the U.S. Government. The guidelines are based on registered trademarks of Carl Zeiss AG used under license of Carl standards that were developed by independent scientific Zeiss Vision GmbH. The Bluetooth word mark and logos are owned by


Document Created: 2018-08-01 14:25:49
Document Modified: 2018-08-01 14:25:49
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC