DFS Declaration_R1

FCC ID: 2AJOTTA-1087

Attestation Statements

Download: PDF
FCCID_4157442

                                         HMD Global Oy                                 Tel +393316272922
                                         Bertel Jungin aukio 9, 02600 Espoo, Finland   Fax +97143697604


                                                                                                           November 13, 2018


                                       DTS-UNII Device Declaration Letter
To whom it may concern,
We have declared below featured for FCC equipment authorization,
Device FCC ID: 2AJOTTA-1087

(1)       DFS Device --      Master                                        Client with Radar detection capability ,
                            Client without radar detection capability      N/A
(2)      Active / Passive Scanning , ad-hoc mode access point capability
           Frequency Band        Active Scanning        passive scanning      Ad Hoc Mode or           Access point
                (MHz)             (the device can      (where the device        WIFI Direct             capability
                                 transmit a probe       is can listen only        capability
                                     (beacon))           with no probes)
              5150-5250              Yes ,     No            Yes ,     No         Yes ,     No           Yes ,     No
              5250-5350              Yes ,     No            Yes ,     No         Yes ,     No           Yes ,     No
              5470-5725              Yes ,     No            Yes ,     No         Yes ,     No           Yes ,     No
              5725-5850              Yes ,     No            Yes ,     No         Yes ,     No           Yes ,     No
(3)      Country code selection ability -    Yes ,    No
If yes, please explain how it was implemented: (please also help to provide detail of options for each country selection)


(4)      Meet 15.202 requirement -        Yes,     No,
Please check below:
   A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving
an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other
devices
   A client device is defined as a device operating in a mode in which the transmissions of the device are under control of
the master. A device in client mode is not able to initiate a network.
(5)      For client devices that have software configuration control to operate in different modes
(active scanning in some and passive scanning in others) in different bands
 (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which
configure the modes of operations through software, the application must provide software and operations description on
how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end
user or an installer.
    Apply,      No Apply, (If apply, please help to provide explanation on it was implement, and how software was
controlled)
Factory set only.




________________________________
Rosario Casillo
Director Technology and Compliance
rosario.casillo@hmdglobal.com
HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets.
Nokia is a registered trademark of the Nokia Corporation.



Document Created: 2018-11-13 11:59:46
Document Modified: 2018-11-13 11:59:46

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC