User Manual

FCC ID: 2AJOTTA-1063

Users Manual

Download: PDF
FCCID_3855402

Headset connector Main camera Microphone Front camera Get Started Nokia x SIM cards Earpiece MicroSD card USB connector Loudspeaker Volume keys Microphone Power/Lock key TA-1057/TA-1063 EN-EU 1. Insert the SIM and memory Note: On dual SIM capable devices, both SIM1 and SIM2 slots support 4G networks. However, if 2. Charge the battery and switch card your SIM1 and SIM2 are both LTE SIM cards, the pri- the phone on mary SIM supports 4G/3G/2G networks, while the 1.Open the SIM card tray: push the tray opener pin secondary SIM can only support 3G/2G. For more Plug a compatible charger into a wall outlet, and in the tray hole and slide the tray out. information on your SIM cards, contact your service connect the cable to your phone. Your phone sup- 2. Put the nano-SIM in slot 1 on the tray with the provider. ports the USB micro-B cable. You can also charge contact area face down. If you have a second SIM, your phone from a computer with a USB cable, but put it in slot 2. it may take a longer time. If the battery is completely discharged, it may take 3. Open the memory card tray: push the tray opener several minutes before the charging indicator is dis- pin in the tray hole and slide the tray out. played. 4. Put the memory card in the memory card slot. To switch your phone on, press and hold the power 5. Slide the trays back in their slots. key until the phone vibrates. The phone guides you Use only original nano-SIM cards. Use of incompati- through the setup. ble SIM cards may damage the card or the device, and may corrupt data stored on the card. Use only compatible memory cards approved for use with this device. Incompatible cards may dam- age the card and the device and corrupt data stored on the card. Important: Do not remove the memory card when an app is using it. Doing so may damage the memory card and the device and corrupt data stored on the card. For an online user guide and troubleshooting help, go to Both SIM cards are available at the same time when the device is not being used, but while one SIM card is active, for example, making a call, the other may be unavailable. PKES255001A V1.0 xxxxxxxxxx

Product and safety info devices offer a range of functions, they can be used in other positions, such as on the body. In this case, the highest tested SAR expressly approved by HMD Global could void the user’s authority to operate this equipment. Note: This equipment has been tested and Important: value is 1.39 W/kg* at the separation distance of 0.5 cm from the found to comply with the limits for a Class B digital device, pursuant You can only use your device on the GSM 850/900/1800/1900; body. to part 15 of the FCC Rules. These limits are designed to provide WCDMA 1, 5, 8; LTE 1, 3, 5, 7, 8, 20, 38, 40 networks. For electronic safety, maintain the separation distance with reasonable protection against harmful interference in a residential You need a subscription with a service provider. accessories containing no metal, that position handset a minimum of installation. This equipment generates, uses and can radiate radio the above distance. Use of other accessories may not ensure frequency energy and, if not installed and used in accordance with Important: 4G/LTE might not be supported by your network the instructions, may cause harmful interference to radio service provider or by the service provider you are using when compliance with RF exposure guidelines. communications. However, there is no guarantee that interference traveling. In these cases, you may not be able to make or receive *The tests are carried out in accordance with international guidelines will not occur in a particular installation. If this equipment does cause calls, send or receive messages or use mobile data connections. To for testing. harmful interference to radio or television reception, which can be make sure your device works seamlessly when full 4G/LTE service is This mobile device meets guidelines for exposure to radio waves as determined by turning the equipment off and on, the user is not available, it is recommended that you change the highest set forth by the Federal Communications Commission (FCC). Refer to encouraged to try to correct the interference by one or more of the connection speed from 4G to 3G. To do this, on the home screen, tap the following. following measures: Settings > Network & Internet > Mobile network, and switch Preferred network type to 2G/3G. FCC RF Exposure Information • Reorient or relocate the receiving antenna. Your handset is a radio transmitter and receiver. It is designed and • Increase the separation between the equipment and receiver. For more info, contact your network service provider. • Connect the equipment into an outlet on a circuit different from manufactured not to exceed the emission limits for exposure to radio Maximum transmit power frequency (RF) energy set by the Federal Communications that to which the receiver is connected. Commission of the U.S. Government. The guidelines are based on • Consult the dealer or an experienced radio/TV technician for help. GSM 850, 900 35 dBm This device has an electronic label for certification information. To standards that were developed by independent scientific GSM 1800, 1900 32 dBm organization through periodic and thorough evaluation of scientific access it, select Settings > System > Certification. WCDMA 1, 5, 8 25 dBm studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The © 2018 HMD Global. All rights reserved. HMD Global Oy is the LTE 1, 3, 5, 7, 8, 20, 25 dBm exposure standard for wireless handsets employs a unit of exclusive licensee of the Nokia brand for phones & tablets. Nokia is a 38, 40 measurement known as the Specific Absorption Rate, or SAR. The registered trademark of Nokia Corporation. Bluetooth® 8 dBm SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g. at the ear and worn on the body) as The Bluetooth word mark and logos are owned by the Bluetooth SIG, WLAN 2.4G 17 dBm required by the FCC for each model. The highest SAR value for this Inc. and any use of such marks by HMD Global is under license. WLAN 5G 17 dBm model handset as reported to the FCC when tested for use at the ear is 1.08 W/kg, and when worn on the body in a holder or carry case, is NFC 18.45dBuA/m 0.75 W/kg. Your device has an internal, non-removable, rechargeable battery. Body-worn Operation; This device was tested for typical body-worn Do not attempt to remove the battery or back cover, as you may operations with the handset kept 1.5 cm from the body. To maintain damage the device. To replace the battery, take the device to the compliance with FCC RF exposure requirements, use accessories that nearest authorised service facility. maintain a 1.5 cm separation distance between the user’s body and the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this model handset with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model handset is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/ after searching on FCC ID 2AJOTTA-1057 or 2AJOTTA-1063. Additional information on Specific Absorption Rates Charge your device with the FC0200, FC0201, FC0202, FC0203, (SAR) can be found on the FCC website at www.fcc.gov/general/ FC0211, FC0208, AD-5WE, AD-5WX, AD-5WU, AD-5WA, AD-5WN radio-frequency-safety-0. charger. HMD Global may make additional battery or charger models To send data or messages, a good connection to the network is available for this device. Charging time can vary depending on device needed. Sending may be delayed until such a connection is available. capability. Third-party chargers that comply with the applicable USB Follow the separation distance instructions until the sending is requirements, and that can connect to your device USB connector, finished. may also be compatible. Some of the accessories mentioned in this During general use, the SAR values are usually well below the values user guide, such as charger, headset, or data cable, may be sold stated above. This is because, for purposes of system efficiency and separately. to minimise interference on the network, the operating power of your The surface of the device is nickel-free. mobile is automatically decreased when full power is not needed for Parts of the device are magnetic. Metallic materials may be attracted the call. The lower the power output, the lower the SAR value. to the device. Do not place credit cards or other magnetic stripe Device models may have different versions and more than one value. cards near the device for extended periods of time, since the cards Component and design changes may occur over time and some may be damaged. changes could affect SAR values. Note: Pre-installed system software and apps use a significant For more info, go to www.sar-tick.com. Note that mobile devices part of memory space. may be transmitting even if you are not making a voice call. Keep a safe distance when using the flash. Do not use the flash on Your mobile device is also designed to meet the United States people or animals at close range. Do not cover the flash while taking Federal Communications Commission (FCC) guidelines. FCC ratings a photo. for your device and more information on SAR can be found at http:/ Note: The device is restricted to indoor use only when operating /transition.fcc.gov/oet/rfsafety/sar.html. in the 5150 to 5350 MHz frequency range in the following countries: The World Health Organization (WHO) has stated that current scientific information does not indicate the need for any special AT BE BG HR CY CZ DK precautions when using mobile devices. If you are interested in EE FI FR DE EL HU IE reducing your exposure, they recommend you limit your usage or use a hands-free kit to keep the device away from your head and body. IT LV LT LU MT NL PL For more information and explanations and discussions on RF PT RO SK SI ES SE UK exposure, go to the WHO website at www.who.int/peh-emf/en. Copyrights and other notices Certification information (SAR) Declaration of Conformity This mobile device meets guidelines for exposure to radio waves as Hereby, HMD Global Oy declares that this product is in set forth by the Council of Europe (CE) and the Federal compliance with the essential requirements and other Communications Commission (FCC). Refer to the following. relevant provisions of Directive 2014/53/EU. A copy of the European RF Exposure Information Declaration of Conformity can be found at https:// Your mobile device is a radio transmitter and receiver. It is designed www.nokia.com/en_int/phones/declaration-of-conformity. not to exceed the limits for exposure to radio waves recommended FCC notice: by international guidelines. These guidelines were developed by the This device complies with part 15 of the FCC rules. Operation is independent scientific organization ICNIRP and include safety subject to the following two conditions: (1) This device may not cause margins designed to assure the protection of all persons, regardless harmful interference, and (2) this device must accept any of age and health. The guidelines use a unit of measurement known interference received, including interference that may cause as the Specific Absorption Rate, or SAR. undesired operation. For more info, go to www.fcc.gov/engineering- The SAR limit for mobile devices is 2.0 W/kg and the highest SAR technology/electromagnetic-compatibility-division/radio- value for this device when tested at the ear is 0.64 W/kg*. As mobile frequency-safety/faq/rf-safety. Any changes or modifications not


Document Created: 2018-04-30 08:13:44
Document Modified: 2018-04-30 08:13:44
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC