User Manual

FCC ID: 2AJOTTA-1053

Users Manual

Download: PDF
FCCID_3353890

Audio connector Microphone Main camera Get started Front camera Nokia 5 SIM cards Earpiece MicroSD card Home Charger connector Loudspeaker Volume keys Microphone Power/Lock key TA-1024/TA-1053 EN 1.0 1. Insert the SIM and memory 2. Charge the battery and switch 3. Learn more about your new card your phone on Nokia 1. Open the SIM tray and memory card tray by Plug a compatible charger into a wall outlet, and For a printable user guide, online user guide, and putting the provided tray opener into the holes connect the cable to your phone. Your phone troubleshooting help, go to www.nokia.com/ next to the trays. supports the USB micro-B cable. You can also phones 2. Put the nano-SIM into the slot 1 located on the charge your phone from a computer with a USB tray with the contact area face down. If you have cable, but it may take a longer time. a second SIM, put it into the slot 2. If you have a If the battery is completely discharged, it may take memory card, put the card into the slot located on several minutes before the charging indicator is the memory card tray. displayed. 3. Slide the SIM and memory card trays back into To switch your phone on, press and hold the power the slots. key until the phone vibrates. The phone guides Use only original nano-SIM cards. Use of you through the setup. incompatible SIM cards may damage the card or the device, and may corrupt data stored on the card. USB micro-B USB-C XXXXXXXXXXX

Product and safety info usage or use a hands-free kit to keep the device away from your head and body. For more information and explanations and discussions on RF exposure, go to the WHO website at www.who.int/peh-emf/en. Important: For important info on the safe use of your device and battery, read the Product and safety info booklet before you take your device into use. This device has an electronic label for certification information. To access it, select Settings > About > Certification. You can only use your device on the GSM 850/900/1800/1900; WCDMA 1/2/5/8; LTE 1/3/5/7/8/20/28/38/40 networks. You need a subscription with a service provider. Important: 4G/LTE might not be supported by your network service provider or by the service provider you are using when traveling. In these cases, you Copyrights and other notices may not be able to make or receive calls, send or receive messages or use mobile data connections. To make sure your device works seamlessly when full 4G/LTE Declaration of Conformity service is not available, it is recommended that you change the highest connection Hereby, HMD Global Oy declares that this product is in compliance with speed from 4G to 3G. To do this, on the home screen, tap Settings > Mobile the essential requirements and other relevant provisions of Directive networks, and switch Preferred network type to 2G/3G. 2014/53/EU. A copy of the Declaration of Conformity can be found at www.nokia. For more info, contact your network service provider. com/mobile-declaration-of-conformity. Maximum transmit power FCC notice: GSM 900 33 dBm This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) DCS 1800 30 dBm this device must accept any interference received, including interference that may WCDMA FDD I 24.5 dBm cause undesired operation. For more info, go to www.fcc.gov/engineering- technology/electromagnetic-compatibility-division/radio-frequency-safety/faq/ WCDMA FDD VIII 24 dBm rf-safety. Any changes or modifications not expressly approved by HMD Global could LTE Band 1 24 dBm void the user’s authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to LTE Band 3 24 dBm part 15 of the FCC Rules. These limits are designed to provide reasonable protection LTE Band 7 24 dBm against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in LTE Band 8 24 dBm accordance with the instructions, may cause harmful interference to radio LTE Band 20 24 dBm communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or LTE Band 28 24 dBm television reception, which can be determined by turning the equipment off and on, LTE Band 38 24 dBm the user is encouraged to try to correct the interference by one or more of the following measures: LTE Band 40 24 dBm • Reorient or relocate the receiving antenna. Bluetooth 9 dBm • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the WLAN 2.4 GHz 18 dBm receiver is connected. WLAN 5 GHz 14 dBm • Consult the dealer or an experienced radio/TV technician for help. ANT+ 0 dBm © 2017 HMD Global. All rights reserved. HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of Nokia NFC 2 dBm Corporation. Your device has an internal, non-removable, rechargeable battery. Do not attempt to Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States remove the battery, as you may damage the device. To replace the battery, take the and other countries, used with permission. device to the nearest authorised service facility. Charge your device with FC0100 (EU plug) / FC0101 (UK plug) / FC0102 (US plug) / FC0103 (AUS plug) / FC0111 (India plug) charger, depending on the plug type of your country. HMD Global may make additional battery or charger models available for this device. Third-party chargers that comply with the applicable USB requirements, and that can connect to your device USB connector, may also be compatible. Some of the accessories mentioned in this user guide, such as charger, headset, or data cable, may be sold separately. Note: The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in the following countries: The surface of this device is nickel-free. Theoretical talk time: Up to 15 hours Theoretical standby time: Up to 32 days (display off) Use only compatible memory cards approved for use with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card. Note: Pre-installed system software and apps use a significant part of memory space. Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a photo. Certification information (SAR) This mobile device meets guidelines for exposure to radio waves as set forth by the Council of Europe (CE) and the Federal Communications Commission (FCC). Refer to the following. European RF Exposure Information Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2.0 W/kg and the highest SAR value for this device when tested at the ear is 0.321 W/kg*. As mobile devices offer a range of functions, they can be used in other positions, such as on the body. In this case, the highest tested SAR value is 1.55 W/kg* at the separation distance of 0.5 cm from the body. For electronic safety, maintain the separation distance with accessories containing no metal, that position handset a minimum of the above distance. Use of other accessories may not ensure compliance with RF exposure guidelines. * The tests are carried out in accordance with international guidelines for testing. FCC RF Exposure Information Your handset is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientific organization through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model handset as reported to the FCC when tested for use at the ear is 0.8 W/kg, and when worn on the body in a holder or carry case, is 0.52 W/kg. Body-worn Operation; This device was tested for typical body-worn operations with the handset kept 1.5 cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.5 cm separation distance between the user’s body and the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this model handset with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model handset is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/ after searching on FCC ID 2AJOTTA-1024 and FCC ID 2AJOTTA-1053. Additional information on Specific Absorption Rates (SAR) can be found on the FCC website at www.fcc.gov/general/radio-frequency-safety-0. To send data or messages, a good connection to the network is needed. Sending may be delayed until such a connection is available. Follow the separation distance instructions until the sending is finished. During general use, the SAR values are usually well below the values stated above. This is because, for purposes of system efficiency and to minimise interference on the network, the operating power of your mobile is automatically decreased when full power is not needed for the call. The lower the power output, the lower the SAR value. Device models may have different versions and more than one value. Component and design changes may occur over time and some changes could affect SAR values. For more info, go to www.sar-tick.com. Note that mobile devices may be transmitting even if you are not making a voice call. The World Health Organization (WHO) has stated that current scientific information does not indicate the need for any special precautions when using mobile devices. If you are interested in reducing your exposure, they recommend you limit your


Document Created: 2017-04-06 20:32:12
Document Modified: 2017-04-06 20:32:12
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC