User manual

FCC ID: 2AJOTTA-1047

Users Manual

Download: PDF
FCCID_3680008

Headset connector Camera Flash Get Started Nokia x Earpiece Loudspeaker Volume keys Power/Lock key USB connector TA-1047 TA-1060 EN-EU Microphone 1. Insert the SIM and memory 3.Slide the nano-SIM in the SIM slot face down. If you have a dual SIM phone, slide the second SIM in age the card and the device and corrupt data stored on the card. 2. Charge the battery and switch card the SIM2 slot. the phone on 4.Slide the memory card in the memory card slot Note: On dual SIM capable devices, both SIM1 1. Open the back cover: insert your fingernails in and SIM2 slots support 4G networks. However, if Plug a compatible charger into a wall outlet, and face down. the seam between the cover and display, and bend your SIM1 and SIM2 are both LTE SIM cards, the connect the cable to your phone. Your phone the cover open. primary SIM supports 4G/3G/2G networks, while supports the USB micro-B cable. You can also the secondary SIM can only support 2G. For more charge your phone from a computer with a USB information on your SIM cards, contact your service cable, but it may take a longer time. provider. If the battery is completely discharged, it may take several minutes before the charging indicator is displayed. To switch your phone on, press and hold the power key until the phone vibrates. The phone guides you through the setup. 2.If the battery is in the phone, lift it out. For an online user guide and troubleshooting help, go to www.nokia.com/mobile-support. Use only original nano-SIM cards. Use of incompati- ble SIM cards may damage the card or the device, and may corrupt data stored on the card. Use only compatible memory cards approved for use with this device. Incompatible cards may dam- PKFRT55001A V1.0

Product and safety info the above distance. Use of other accessories may not ensure compliance with RF exposure guidelines. expressly approved by HMD Global could void the user’s authority to operate this equipment. Note: This equipment has been tested and Important: For important info on the safe use of your device and found to comply with the limits for a Class B digital device, pursuant battery, read the Product and safety info booklet before you take *The tests are carried out in accordance with international guidelines for testing. to part 15 of the FCC Rules. These limits are designed to provide your device into use. reasonable protection against harmful interference in a residential You can only use your device on the GSM 850/900/1800/1900; installation. This equipment generates, uses and can radiate radio WCDMA 1, 5, 8; LTE B1, 3, 5, 7, 8, 20, 38, 40 networks. You need a This mobile device meets guidelines for exposure to radio waves as frequency energy and, if not installed and used in accordance with subscription with a service provider. set forth by the Federal Communications Commission (FCC). Refer to the instructions, may cause harmful interference to radio Important: 4G/LTE might not be supported by your network the following. communications. However, there is no guarantee that interference service provider or by the service provider you are using when will not occur in a particular installation. If this equipment does cause traveling. In these cases, you may not be able to make or receive FCC RF Exposure Information harmful interference to radio or television reception, which can be calls, send or receive messages or use mobile data connections. To Your handset is a radio transmitter and receiver. It is designed and determined by turning the equipment off and on, the user is make sure your device works seamlessly when full 4G/LTE service is manufactured not to exceed the emission limits for exposure to encouraged to try to correct the interference by one or more of the not available, it is recommended that you change the highest radio frequency (RF) energy set by the Federal Communications following measures: connection speed from 4G to 3G. To do this, on the home screen, tap Commission of the U.S. Government. The guidelines are based on • Reorient or relocate the receiving antenna. Settings > Network & Internet > Mobile network > Advanced, and standards that were developed by independent scientific • Increase the separation between the equipment and receiver. switch Preferred network type to 2G/3G. organization through periodic and thorough evaluation of scientific • Connect the equipment into an outlet on a circuit different from For more info, contact your network service provider. studies. The standards include a substantial safety margin designed that to which the receiver is connected. to assure the safety of all persons, regardless of age and health. The • Consult the dealer or an experienced radio/TV technician for help. Maximum transmit power exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The © 2018 HMD Global. All rights reserved. HMD Global Oy is the GSM 850 32.5 dBm SAR limit set by the FCC is 1.6 W/kg. The tests are performed in exclusive licensee of the Nokia brand for phones & tablets. Nokia is a positions and locations (e.g. at the ear and worn on the body) as registered trademark of Nokia Corporation. GSM 900 32.5 dBm required by the FCC for each model. The highest SAR value for this DCS 1800 30 dBm model handset as reported to the FCC when tested for use at the ear is 0.66 W/kg, and when worn on the body in a holder or carry case, is PCS 1900 30 dBm 1.20 W/kg. WCDMA FDD I 24 dBm Body-worn Operation; This device was tested for typical body-worn WCDMA FDD V 24 dBm operations with the handset kept 1.0 cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that WCDMA FDD VIII 24 dBm maintain a 1.0 cm separation distance between the user’s body and LTE Band B1 23 dBm the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of LTE Band 3 23 dBm accessories that do not satisfy these requirements may not comply LTE Band 5 23 dBm with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this model handset with LTE Band 7 23 dBm all reported SAR levels evaluated as in compliance with the FCC RF LTE Band 8 23 dBm emission guidelines. SAR information on this model handset is on file with the FCC and can be found under the Display Grant section of LTE Band 20 23 dBm www.fcc.gov/oet/ea/ after searching on FCC ID 2AJOTTA-1047 or LTE Band 38 23 dBm 2AJOTTA-1060. LTE Band 40 23 dBm Additional information on Specific Absorption Rates (SAR) can be found on the FCC website at www.fcc.gov/general/radio-frequency- Bluetooth 10 dBm safety-0. WLAN 2.4 G 18 dBm To send data or messages, a good connection to the network is needed. Sending may be delayed until such a connection is available. Charge your device with the FC0200, FC0201, FC0202, FC0203, Follow the separation distance instructions until the sending is FC0211, AD-5WE, AD-5WX, AD-5WU, AD-5WA, AD-5WN chargers. finished. HMD Global may make additional battery or charger models available During general use, the SAR values are usually well below the values for this device. Charging time can vary depending on device stated above. This is because, for purposes of system efficiency and capability. Third-party chargers that comply with the applicable USB to minimise interference on the network, the operating power of requirements, and that can connect to your device USB connector, your mobile is automatically decreased when full power is not needed may also be compatible. Some of the accessories mentioned in this for the call. The lower the power output, the lower the SAR value. user guide, such as charger, headset, or data cable, may be sold separately. Device models may have different versions and more than one value. Component and design changes may occur over time and some The surface of the device is nickel-free. changes could affect SAR values. Parts of the device are magnetic. Metallic materials may be attracted For more info, go to www.sar-tick.com. Note that mobile devices to the device. Do not place credit cards or other magnetic stripe may be transmitting even if you are not making a voice call. cards near the device for extended periods of time, since the cards may be damaged. Your mobile device is also designed to meet the United States Federal Communications Commission (FCC) guidelines. FCC ratings Note: Pre-installed system software and apps use a significant for your device and more information on SAR can be found at http:/ part of memory space. /transition.fcc.gov/oet/rfsafety/sar.html. Keep a safe distance when using the flash. Do not use the flash on The World Health Organization (WHO) has stated that current people or animals at close range. Do not cover the flash while taking scientific information does not indicate the need for any special a photo. precautions when using mobile devices. If you are interested in reducing your exposure, they recommend you limit your usage or use Certification information a hands-free kit to keep the device away from your head and body. For more information and explanations and discussions on RF (SAR) exposure, go to the WHO website at www.who.int/peh-emf/en. This mobile device meets guidelines for exposure to radio waves as This device has an electronic label for certification information. To set forth by the Council of Europe (CE) and the Federal access it, select Settings > System > About phone > Certification. Communications Commission (FCC). Refer to the following. European RF Exposure Information Copyrights and other notices Your mobile device is a radio transmitter and receiver. It is designed Declaration of Conformity not to exceed the limits for exposure to radio waves recommended Hereby, HMD Global Oy declares that this product is in by international guidelines. These guidelines were developed by the compliance with the essential requirements and other independent scientific organization ICNIRP and include safety relevant provisions of Directive 2014/53/EU. A copy of the margins designed to assure the protection of all persons, regardless Declaration of Conformity can be found at www.nokia.com/ of age and health. The guidelines use a unit of measurement known mobile-declaration-of-conformity. as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2.0 W/kg and the highest SAR FCC notice: value for this device when tested at the ear is 0.720 W/kg*. As mobile This device complies with part 15 of the FCC rules. Operation is devices offer a range of functions, they can be used in other subject to the following two conditions: (1) This device may not cause positions, such as on the body. In this case, the highest tested SAR harmful interference, and (2) this device must accept any value is 1.675 W/kg* at the separation distance of 0.5 cm from the interference received, including interference that may cause body. undesired operation. For more info, go to www.fcc.gov/engineering- For electronic safety, maintain the separation distance with technology/electromagnetic-compatibility-division/radio- accessories containing no metal, that position handset a minimum of frequency-safety/faq/rf-safety. Any changes or modifications not



Document Created: 2017-12-15 10:18:17
Document Modified: 2017-12-15 10:18:17
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC