User Manual

FCC ID: 2AJOTTA-1044

Users Manual

Download: PDF
FCCID_3343342

Audio connector Microphone Main camera Get started Front camera Nokia 5 SIM cards Earpiece MicroSD card Home Charger connector Loudspeaker Volume keys Microphone Power/Lock key TA-1027/TA-1044 EN 1.0 1. Insert the SIM and memory 2. Charge the battery and switch 3. Learn more about your new card your phone on Nokia 1. Open the SIM tray and memory card tray by Plug a compatible charger into a wall outlet, and For a printable user guide, online user guide, and putting the provided tray opener into the holes connect the cable to your phone. Your phone troubleshooting help, go to www.nokia.com/ next to the trays. supports the USB micro-B cable. You can also phones 2. Put the nano-SIM into the slot 1 located on the charge your phone from a computer with a USB tray with the contact area face down. If you have cable, but it may take a longer time. a second SIM, put it into the slot 2. If you have a If the battery is completely discharged, it may take memory card, put the card into the slot located on several minutes before the charging indicator is the memory card tray. displayed. 3. Slide the SIM and memory card trays back into To switch your phone on, press and hold the power the slots. key until the phone vibrates. The phone guides Use only original nano-SIM cards. Use of you through the setup. incompatible SIM cards may damage the card or the device, and may corrupt data stored on the card. USB micro-B USB-C XXXXXXXXXXX

Product and safety info For more info, go to www.sar-tick.com. Note that mobile devices may be transmitting even if you are not making a voice call. Important: We invite you to read the enclosed instructions before installing The World Health Organization (WHO) has stated that current scientific information your equipment. For valuable information on the safe use of the device and does not indicate the need for any special precautions when using mobile devices. battery, read the Product and safety info booklet before you take your device into If you are interested in reducing your exposure, they recommend you limit your use. usage or use a hands-free kit to keep the device away from your head and body. For more information and explanations and discussions on RF exposure, go to the WHO You can only use your device on the GSM 850/900/1800/1900; WCDMA 1/2/4/5/8; website at www.who.int/peh-emf/en. LTE 2/3/4/7/12/17/28/38 networks. You need a subscription with a service provider. This device has an electronic label for certification information. To access it, select Important: 4G/LTE might not be supported by your network service provider Settings > About > Certification. or by the service provider you are using when traveling. In these cases, you may not be able to make or receive calls, send or receive messages or use mobile data connections. To make sure your device works seamlessly when full 4G/LTE service is not available, it is recommended that you change the highest connection Electronical information of the device speed from 4G to 3G. To do this, on the home screen, tap Settings > Mobile Product Mobile phone networks, and switch Preferred network type to 2G/3G. Supplier HMD Global For more info, contact your network service provider. Model TA-1027/TA-1044 Maximum transmit power Charger FC0102 GSM 900 33 dBm The following electrical characteristics apply to HMD Global FC0102 chargers DCS 1800 30 dBm only: WCDMA FDD I 24.5 dBm Input 100-240 Vca 50-60 Hz 0-300 mA WCDMA FDD VIII 24 dBm Output 5.0 Vcc 0-2000 mA LTE Band 3 24 dBm Rechargeable battery supplier HMD Global LTE Band 7 24 dBm Phone power consumption 3,8 Vcc Copyrights and other notices LTE Band 28 24 dBm LTE Band 38 24 dBm Bluetooth WLAN 2.4 GHz 9 dBm 18 dBm Declaration of Conformity Hereby, HMD Global Oy declares that this product is in compliance with WLAN 5 GHz 14 dBm the essential requirements and other relevant provisions of Directive ANT+ 0 dBm 2014/53/EU. A copy of the Declaration of Conformity can be found at www.nokia. com/mobile-declaration-of-conformity. NFC 2 dBm FCC notice: Your device has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery, as you may damage the device. To replace the battery, take the This device complies with part 15 of the FCC rules. Operation is subject to the device to the nearest authorised service facility. following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may Charge your device with FC0102 charger. HMD Global may make additional battery or cause undesired operation. For more info, go to www.fcc.gov/engineering- charger models available for this device. Third-party chargers that comply with the technology/electromagnetic-compatibility-division/radio-frequency-safety/faq/ applicable USB requirements, and that can connect to your device USB connector, rf-safety. Any changes or modifications not expressly approved by HMD Global could may also be compatible. Some of the accessories mentioned in this user guide, such void the user’s authority to operate this equipment. Note: This equipment has been as charger, headset, or data cable, may be sold separately. tested and found to comply with the limits for a Class B digital device, pursuant to Note: The device is restricted to indoor use only when operating in the 5150 to part 15 of the FCC Rules. These limits are designed to provide reasonable protection 5350 MHz frequency range in the following countries: against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: The surface of this device is nickel-free. • Reorient or relocate the receiving antenna. Use only compatible memory cards approved for use with this device. Incompatible • Increase the separation between the equipment and receiver. cards may damage the card and the device and corrupt data stored on the card. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Note: Pre-installed system software and apps use a significant part of • Consult the dealer or an experienced radio/TV technician for help. memory space. © 2017 HMD Global. All rights reserved. HMD Global Oy is the exclusive licensee of Keep a safe distance when using the flash. Do not use the flash on people or animals the Nokia brand for phones & tablets. Nokia is a registered trademark of Nokia at close range. Do not cover the flash while taking a photo. Corporation. When this device has reached the end of its working life, all of its materials can be Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States recovered as materials and energy. Recycle packaging and user guides at your local and other countries, used with permission. recycling scheme. When you cooperate and deliver all these materials to one of the available collection sites, you contribute in helping the environment and help to Manufactured in China. ensure the health of future generations. Importer (this information applies only in Mexico): All electrical and electronic products and batteries may contain recyclable metals Grand cel S.A. de C.V. and other potentially hazardous substances and must be taken to their respective collection sites at the end of their working life. Under no circumstances should you 106 Avenida Calle Corona break open a battery or other related materials. Do not dispose of these products as Colonia Cervecería Corona unsorted municipal waste, as this may cause contamination of the environment or risks to human health. All HMD Global products are in compliance with the applicable Naucalpan industry international production standards and to all requirements defined by the Edo de México competent government agencies. CP 53330 Certification information (SAR) RFC: GCE1410146Y9 This mobile device meets guidelines for exposure to radio waves as set forth by the Council of Europe (CE) and the Federal Communications Commission (FCC). Refer to the following. European RF Exposure Information Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2.0 W/kg and the highest SAR value for this device when tested at the ear is 0.321 W/kg*. As mobile devices offer a range of functions, they can be used in other positions, such as on the body. In this case, the highest tested SAR value is 1.55 W/kg* at the separation distance of 0.5 cm from the body. For electronic safety, maintain the separation distance with accessories containing no metal, that position handset a minimum of the above distance. Use of other accessories may not ensure compliance with RF exposure guidelines. * The tests are carried out in accordance with international guidelines for testing. FCC RF Exposure Information Your handset is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientific organization through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model handset as reported to the FCC when tested for use at the ear is 0.8 W/kg, and when worn on the body in a holder or carry case, is 0.8 W/kg. Body-worn Operation; This device was tested for typical body-worn operations with the handset kept 1.5 cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.5 cm separation distance between the user’s body and the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this model handset with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model handset is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/ after searching on FCC ID 2AJOTTA-1027 and FCC ID 2AJOTTA-1044. Additional information on Specific Absorption Rates (SAR) can be found on the FCC website at www.fcc.gov/general/radio-frequency-safety-0. To send data or messages, a good connection to the network is needed. Sending may be delayed until such a connection is available. Follow the separation distance instructions until the sending is finished. During general use, the SAR values are usually well below the values stated above. This is because, for purposes of system efficiency and to minimise interference on the network, the operating power of your mobile is automatically decreased when full power is not needed for the call. The lower the power output, the lower the SAR value. Device models may have different versions and more than one value. Component and design changes may occur over time and some changes could affect SAR values.


Document Created: 2017-03-28 19:37:34
Document Modified: 2017-03-28 19:37:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC