I17Z60313-SRD03-FCC_Report_WLAN_2.4G_Rev0_Part1

FCC ID: 2AJOTTA-1039

Test Report

Download: PDF
FCCID_3383206

FCC PART 15C TESTREPORT No. I17Z60313-SRD03 for HMD Global Oy Smart Phone TA-1039 with FCC ID: 2AJOTTA-1039 Hardware Version: 3 Software Version: 000C_3_110 Issued Date: 2017-04-17 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: CTTL, Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT No.52, HuayuanNorth Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2512,Fax:+86(0)10-62304633-2504 Email:cttl_terminals@catr.cn, website:www.chinattl.com ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page2 of 121 REPORT HISTORY Report Number Revision Description Issue Date I17Z60313-SRD03 Rev.0 1st edition 2017-04-17 ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page3 of 121 CONTENTS 1. TEST LABORATORY ......................................................................................................................... 5 1.1. TESTING LOCATION .................................................................................................................... 5 1.2. TESTING ENVIRONMENT ........................................................................................................... 5 1.3. PROJECT DATA .............................................................................................................................. 5 1.4. SIGNATURE ..................................................................................................................................... 5 2. CLIENT INFORMATION ................................................................................................................... 6 2.1. APPLICANT INFORMATION ....................................................................................................... 6 2.2. MANUFACTURER INFORMATION ............................................................................................ 6 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................. 7 3.1. ABOUT EUT ..................................................................................................................................... 7 3.2. INTERNAL IDENTIFICATION OF EUT ..................................................................................... 7 3.3. INTERNAL IDENTIFICATION OF AE ........................................................................................ 7 3.4. GENERAL DESCRIPTION ............................................................................................................ 8 3.5. INTERPRETATION OF THE TEST ENVIRONMENT .............................................................. 8 4. REFERENCE DOCUMENTS ............................................................................................................. 9 4.1. DOCUMENTS SUPPLIED BY APPLICANT ............................................................................... 9 4.2. REFERENCE DOCUMENTS FOR TESTING ............................................................................. 9 5. TEST RESULTS ................................................................................................................................. 10 5.1. SUMMARY OF TEST RESULTS ................................................................................................. 10 5.2. STATEMENTS ................................................................................................................................ 10 5.3. TEST CONDITIONS...................................................................................................................... 10 6. TEST FACILITIES UTILIZED .........................................................................................................11 7. MEASUREMENT UNCERTAINTY ................................................................................................ 12 7.1. MAXIMUM OUTPUT POWER ................................................................................................... 12 7.2. PEAK POWER SPECTRAL DENSITY....................................................................................... 12 7.3. DTS 6-DB SIGNAL BANDWIDTH .............................................................................................. 12 7.4. BAND EDGES COMPLIANCE .................................................................................................... 12 7.5. TRANSMITTER SPURIOUS EMISSION ................................................................................... 12 7.6. AC POWER-LINE CONDUCTED EMISSION .......................................................................... 12 ANNEX A: DETAILED TEST RESULTS ................................................................................................ 13 ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page4 of 121 A.1. MEASUREMENT METHOD............................................................................................................ 13 A.2. MAXIMUM OUTPUT POWER........................................................................................................ 14 A.2.1. PEAK OUTPUT POWER-CONDUCTED ............................................................................................... 14 A.2.2. AVERAGE OUTPUT POWER-CONDUCTED ......................................................................................... 15 A.3. PEAK POWER SPECTRAL DENSITY ........................................................................................... 17 A.4. DTS 6-DB SIGNAL BANDWIDTH .................................................................................................. 24 A.5. BAND EDGES COMPLIANCE ........................................................................................................ 31 A.6. TRANSMITTER SPURIOUS EMISSION ....................................................................................... 36 A.6.1 TRANSMITTER SPURIOUS EMISSION – CONDUCTED ........................................................................ 36 A.6.2 TRANSMITTER SPURIOUS EMISSION - RADIATED ............................................................................. 89 A.7. AC POWER-LINE CONDUCTED EMISSION .............................................................................118 ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page5 of 121 1. Test Laboratory 1.1. Testing Location Conducted testing Location: CTTL(huayuan North Road) Address: No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China100191 Radiated testing Location: CTTL(BDA) Address: No. 18 Jia Kangding Street, BDA District, Beijing, P. R. China 100191 1.2. Testing Environment Normal Temperature: 15-35℃ Extreme Temperature: -10/+55℃ Relative Humidity: 20-75% 1.3. Project data Testing Start Date: 2017-02-20 Testing End Date: 2017-04-14 1.4. Signature Jiang Xue (Prepared this test report) Zheng Wei (Reviewed this test report) Lv Songdong (Approved this test report) ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page6 of 121 2. Client Information 2.1. Applicant Information Company Name: HMD Global Oy Address: Karaportti 2, 02610 Espoo, Finland City: Espoo Postal Code: 201203 Country: Finland Contact Mikko Kahlos Telephone: +358-408036126 Fax: / 2.2. Manufacturer Information Company Name: HMD Global Oy Address: Karaportti 2, 02610 Espoo, Finland City: Espoo Postal Code: 201203 Country: Finland Contact Mikko Kahlos Telephone: +358-408036126 Fax: / ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page7 of 121 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT Description Smart Phone Model name TA-1039 FCC ID 2AJOTTA-1039 IC ID / With WLAN Function Yes Frequency Range ISM 2400MHz~2483.5MHz Type of Modulation DSSS/CCK/OFDM Number of Channels 11 Antenna Integral Antenna MAX Conducted Power 22.15dBm(OFDM) Power Supply 3.84 VDC by Battery 3.2. Internal Identification of EUT EUT ID* SN or IMEI HW Version SW Version EUT1 / 3 000C_3_110 EUT2 / 3 000C_3_050 *EUT ID: is used to identify the test sample in the lab internally. 3.3. Internal Identification of AE AE ID* Description SN AE1 Battery INBUILT AE2 Battery INBUILT AE3 Travel charger / AE4 Travel charger / AE5 USB cable / AE6 Headset / AE1 Model HE316 Manufacturer SCUD(FUJIAN) ELECTRONICS CO LTD Capacitance 3000mAh Nominal voltage 3.82V AE2 Model HE317 Manufacturer SCUD(FUJIAN) ELECTRONICS CO LTD Capacitance 3000mAh Nominal voltage 3.84V ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page8 of 121 AE3/AE4 Model FC0102 Manufacturer Salcomp Length of cable / AE5 Model CUBB01M-FA010-DH Manufacturer FOXCONN Length of cable 99cm AE6 Model 5CAB5422B-N01-DG Manufacturer FOXCONN Length of cable / *AE ID: is used to identify the test sample in the lab internally. 3.4. General Description The Equipment under Test (EUT) is a model of Smart Phone with integrated antenna and inbuilt battery. It has Bluetooth (EDR) function. It consists of normal options: travel charger, USB cable and Phone. Manual and specifications of the EUT were provided to fulfil the test. Samples undergoing test were selected by the client. 3.5. Interpretation of the Test Environment For the test methods, the test environment uncertainty figures correspond to an expansion factor k=2. Measurement Uncertainty Parameter Uncertainty temperature 0.48°C humidity 2% DC voltages 0.003V ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page9 of 121 4. Reference Documents 4.1. Documents supplied by applicant EUT feature information is supplied by the applicant or manufacturer, which is the basis of testing. 4.2. Reference Documents for testing The following documents listed in this section are referred for testing. Reference Title Version FCC CFR 47, Part 15, Subpart C: 15.205 Restricted bands of operation; FCC Part15 15.209 Radiated emission limits, general requirements; 2015 15.247 Operation within the bands 902-928MHz, 2400-2483.5 MHz, and 5725-5850 MHz. American National Standard of Procedures for Compliance ANSI C63.10 2013 Testing of Unlicensed Wireless Devices ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page10 of 121 5. Test Results 5.1. Summary of Test Results Sub-clause of SUMMARY OF MEASUREMENT RESULTS Sub-clause of IC Verdict Part15C Maximum Peak Output Power 15.247 (b) / P Peak Power Spectral Density 15.247 (e) / P Occupied 6dB Bandwidth 15.247 (a) / P Band Edges Compliance 15.247 (d) / P Transmitter Spurious Emission - Conducted 15.247 (d) / P Transmitter Spurious Emission - Radiated 15.247, 15.205, 15.209 / P AC Powerline Conducted Emission 15.107, 15.207 / P Please refer to ANNEX A for detail. Terms used in Verdict column P Pass, The EUT complies with the essential requirements in the standard. NP Not Perform, The test was not performed by CTTL NA Not Applicable, The test was not applicable F Fail, The EUT does not comply with the essential requirements in the standard F Fail, The EUT does not comply with the essential requirements in the standard 5.2. Statements The test cases as listed in section 5.1 of this report for the EUT specified in section 3 was performed by CTTL and according to the standards or reference documents listed in section 4.2 The EUT met all requirements of the standards or reference documents, and only the WLAN function was tested in this report. This model is a variant product which model name is TA-1025; all the test result has been derived from test report of TA-1025. 5.3. Test Conditions T nom Normal Temperature T min Low Temperature T max High Temperature V nom Normal Voltage For this report, if the test cases listed above are tested under normal temperature and normal voltage, and also under norm humidity, the specific condition is shown as follows: Temperature T nom 26℃ Voltage V nom 3.84V (By battery) Humidity H nom 44% ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page11 of 121 6. Test Facilities Utilized Conducted test system Serial Calibration Calibration No. Equipment Model Manufacturer Number date Due date Vector Signal Rohde & 1 FSQ40 200089 2016-06-07 2017-06-06 Analyzer Schwarz 2 Shielding Room S81 / ETS-Lindgren / / Radiated emission test system Serial Calibration Calibratio No. Equipment Model Manufacturer Number date n Due date Rohde & 1 Test Receiver ESU26 100376 1 year 2017-11-30 Schwarz 2 BiLog Antenna VULB9163 514 Schwarzbeck 3 years 2017-11-24 Dual-Ridge 3 Waveguide 3116 2661 ETS-Lindgren 3 years 2017-06-17 Horn Antenna Dual-Ridge 4 Waveguide 3115 6914 ETS-Lindgren 3 years 2017-09-21 Horn Antenna Vector Signal Rohde & 5 FSV 101047 1 year 2017-06-28 Analyzer Schwarz Rohde & 6 Test Receiver ESCI7 100948 1 year 2017-07-05 Schwarz Rohde & 7 AMN ESH3-Z5 825562/028 1 year 2017-07-06 Schwarz ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page12 of 121 7. Measurement Uncertainty 7.1. Maximum Output Power Measurement Uncertainty: 0.339dB,k=1.96 7.2. Peak Power Spectral Density Measurement Uncertainty: 0.705dBm/MHz,k=1.96 7.3. DTS 6-dB Signal Bandwidth Measurement Uncertainty: 60.80Hz,k=1.96 7.4. Band Edges Compliance Measurement Uncertainty : 0.62dBm,k=1.96 7.5. Transmitter Spurious Emission Conducted (k=1.96) Frequency Range Uncertainty(dBm) 30MHz ≤ f ≤ 2GHz 1.22 2GHz ≤ f ≤3.6GHz 1.22 3.6GHz ≤ f ≤8GHz 1.22 8GHz ≤ f ≤12.75GHz 1.51 12.75GHz ≤ f ≤26GHz 1.51 26GHz ≤ f ≤40GHz 1.59 Radiated (k=2) Frequency Range Uncertainty(dBm) 30MHz ≤ f ≤ 1GHz 4.86 1GHz ≤ f ≤18GHz 5.26 18GHz ≤ f ≤40GHz 5.28 7.6. AC Power-line Conducted Emission Measurement Uncertainty : 3.38dBm,k=2 ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page13 of 121 ANNEX A: Detailed Test Results A.1. Measurement Method A.1.1. Conducted Measurements Connect the EUT to the test system as Fig.A.1.1.1 shows. Set the EUT to the required work mode. Set the EUT to the required channel. Set the Vector Signal Analyzer and start measurement. Record the values. Vector Signal Analyzer Vector Signal EUT Attenuator Analyzer Shielding room Fig.A.1.1.1: Test Setup Diagram for Conducted Measurements A.1.2. Radiated Emission Measurements In the case of radiated emission, the used settings are as follows, Sweep frequency from 30 MHz to 1GHz, RBW = 100 kHz, VBW = 300 kHz; Sweep frequency from 1 GHz to 26GHz, RBW = 1MHz, VBW = 10Hz; Antenna Antenna Vector Signal EUT Analyzer (Test Receiver) Anechoic Chamber Fig.A.1.2.1: Test Setup Diagram for Radiated Measurements ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page14 of 121 A.2. Maximum Output Power Method of Measurement: See ANSI C63.10-2013-clause 11.9.1.2 a) Set the RBW = 1 MHz. b) Set the VBW = 3 MHz. c) Set the span ≥ [1.5 × DTS bandwidth]. d) Detector = peak. e) Sweep time = auto couple. f) Trace mode = max hold. g) Allow trace to fully stabilize. h) Use the instrument’s band/channel power measurement function with the band limits set equal to the DTS bandwidth edges (for some instruments, this may require a manual override to select the peak detector). Measurement Limit: Standard Limit (dBm) FCC CRF Part 15.247(b) < 30 EUT ID: EUT2 A.2.1. Peak Output Power-conducted Measurement Results: 802.11b/g mode Test Result (dBm) Data Rate Mode 2412MHz 2437MHz 2462 MHz (Mbps) (Ch1) (Ch6) (Ch11) 1 18.94 / / 2 19.15 / / 802.11b 5.5 20.68 / / 11 22.15 22.00 21.77 6 20.76 / / 9 20.76 / / 12 20.59 / / 18 20.46 / / 802.11g 24 20.86 / / 36 20.77 / / 48 20.90 20.77 20.56 54 20.76 / / The data rate 11Mbps and 48Mbps are selected as worse condition, and the following cases are performed with this condition. ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page15 of 121 802.11n-HT20 mode Test Result (dBm) Data Rate Mode 2412MHz 2437MHz 2462 MHz (Index) (Ch1) (Ch6) (Ch11) MCS0 19.72 / / MCS1 19.28 / / MCS2 19.52 / / 802.11n MCS3 19.74 / / (20MHz) MCS4 19.66 / / MCS5 19.68 / / MCS6 19.70 / / MCS7 19.76 19.60 19.63 The data rate MCS7 is selected as worse condition, and the following cases are performed with this condition. 802.11n-HT40 mode Test Result (dBm) Data Rate Mode 2422MHz 2437MHz 2452 MHz (Index) (Ch3) (Ch6) (Ch9) MCS0 16.58 / / MCS1 16.46 / / MCS2 16.20 / / 802.11n MCS3 16.68 16.57 16.40 (40MHz) MCS4 16.50 / / MCS5 16.54 / / MCS6 16.52 / / MCS7 16.50 / / The data rate MCS3 is selected as worse condition, and the following cases are performed with this condition. Conclusion: Pass A.2.2. Average Output Power-conducted Method of Measurement: See ANSI C63.10-2013-clause 11.9.2.2.2 The procedure for this method is as follows: a) Set span = 80MHz. b) Set RBW = 1MHz. c) Set VBW = 3MHz d) Number of points in sweep = 625 e) Sweep time = auto. f) Detector = RMS. g) The trigger shall be set to “free run.” h) Trace average 100 traces in power averaging (rms) mode. i) Compute power by integrating the spectrum across the OBW of the signal using the instrument’s ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page16 of 121 band power measurement function, with band limits set equal to the OBW band edges. 802.11b/g mode Test Result (dBm) Mode 2412MHz (Ch1) 2437MHz (Ch6) 2462 MHz (Ch11) 802.11b 15.31 15.12 15.04 802.11g 11.76 11.69 11.58 802.11n-HT20 mode Test Result (dBm) Mode 2412MHz (Ch1) 2437MHz (Ch6) 2462 MHz (Ch11) 802.11n (20MHz) 10.67 10.33 10.49 802.11n-HT40 mode Test Result (dBm) Mode 2422MHz (Ch3) 2437MHz (Ch6) 2452 MHz (Ch9) 802.11n(40MHz) 6.91 6.76 6.78 Conclusion: Pass ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page17 of 121 A.3. Peak Power Spectral Density Method of Measurement: See ANSI C63.10-2013-clause 11.10.2 a) Set analyzer center frequency to DTS channel center frequency. b) Set the span to 1.5 times the DTS bandwidth. c) Set the RBW to RBW = 3 kHz. d) Set the VBW = 10 kHz. e) Detector = peak. f) Sweep time = auto couple. g) Trace mode = max hold. h) Allow trace to fully stabilize. i) Use the peak marker function to determine the maximum amplitude level within the RBW. Measurement Limit: Standard Limit FCC CRF Part 15.247(e) < 8 dBm/3 kHz Measurement Results: 802.11b/g mode Power Spectral Density Mode Channel Conclusion ( dBm/3 kHz ) 1 Fig.A.3.1 -7.90 P 802.11b 6 Fig.A.3.2 -8.56 P 11 Fig.A.3.3 -7.98 P 1 Fig.A.3.4 -13.74 P 802.11g 6 Fig.A.3.5 -14.51 P 11 Fig.A.3.6 -14.86 P 802.11n-HT20 mode Power Spectral Density Mode Channel Conclusion ( dBm/3 kHz ) 1 Fig.A.3.7 -15.21 P 802.11n 6 Fig.A.3.8 -14.72 P (HT20) 11 Fig.A.3.9 -14.82 P 802.11n-HT40 mode Power Spectral Density Mode Channel Conclusion ( dBm/3 kHz ) 3 Fig.A.3.10 -21.59 P 802.11n 6 Fig.A.3.11 -21.42 P (HT40) 9 Fig.A.3.12 -21.54 P Conclusion: Pass Test graphs as below: ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page18 of 121 Fig.A.3.1 Power Spectral Density(802.11b,Ch1) Fig.A.3.2 Power Spectral Density (802.11b, Ch 6) ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page19 of 121 Fig.A.3.3 Power Spectral Density (802.11b, Ch 11) Fig.A.3.4 Power Spectral Density (802.11g, Ch 1) ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page20 of 121 Fig.A.3.5 Power Spectral Density (802.11g, Ch 6) Fig.A.3.6 Power Spectral Density (802.11g, Ch 11) ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page21 of 121 Fig.A.3.7 Power Spectral Density (802.11n-HT20, Ch 1) Fig.A.3.8 Power Spectral Density (802.11n-HT20, Ch 6) ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page22 of 121 Fig.A.3.9 Power Spectral Density (802.11n-HT20, Ch 11) Fig.A.3.10 Power Spectral Density (802.11n-HT40, Ch 3) ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page23 of 121 Fig.A.3.11 Power Spectral Density (802.11n-HT40, Ch 6) Fig.A.3.12 Power Spectral Density (802.11n-HT40, Ch 9) ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page24 of 121 A.4. DTS 6-dB Signal Bandwidth Method of Measurement: See ANSI C63.10-2013 section 11.8.1. a) Set RBW = 100 kHz. b) Set the video bandwidth (VBW) = 300 kHz. c) Detector = Peak. d) Trace mode = max hold. e) Sweep = auto couple. f) Allow the trace to stabilize. g) Measure the maximum width of the emission that is constrained by the frequencies associated with the two outermost amplitude points (upper and lower frequencies) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission. Measurement Limit: Standard Limit (kHz) FCC 47 CFR Part 15.247 (a) ≥ 500 EUT ID: EUT2 Measurement Result: 802.11b/g mode Occupied 6dB Bandwidth Mode Channel conclusion ( kHz) 1 Fig.A.4.1 8800.00 P 802.11b 6 Fig.A.4.2 7900.00 P 11 Fig.A.4.3 8750.00 P 1 Fig.A.4.4 16450.00 P 802.11g 6 Fig.A.4.5 16450.00 P 11 Fig.A.4.6 16500.00 P 802.11n-HT20 mode Occupied 6dB Bandwidth Mode Channel conclusion ( kHz) 1 Fig.A.4.7 17750.00 P 802.11n 6 Fig.A.4.8 17650.00 P (HT20) 11 Fig.A.4.9 17700.00 P 802.11n-HT40 mode Occupied 6dB Bandwidth Mode Channel conclusion ( kHz) 3 Fig.A.4.10 35360.00 P 802.11n 6 Fig.A.4.11 35360.00 P (HT40) 9 Fig.A.4.12 35600.00 P Conclusion: Pass ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page25 of 121 Test graphs as below: Fig.A.4.1 Occupied 6dB Bandwidth(802.11b,Ch 1) Fig.A.4.2 Occupied 6dB Bandwidth (802.11b, Ch 6) ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page26 of 121 Fig.A.4.3 Occupied 6dB Bandwidth (802.11b, Ch 11) Fig.A.4.4 Occupied 6dB Bandwidth (802.11g, Ch 1) ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page27 of 121 Fig.A.4.5 Occupied 6dB Bandwidth (802.11g, Ch 6) Fig.A.4.6 Occupied 6dB Bandwidth (802.11g, Ch 11) ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page28 of 121 Fig.A.4.7 Occupied 6dB Bandwidth (802.11n-20MHz, Ch 1) Fig.A.4.8 Occupied 6dB Bandwidth (802.11n-HT20, Ch 6) ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page29 of 121 Fig.A.4.9 Occupied 6dB Bandwidth (802.11n-HT20, Ch 11) Fig.A.4.10 Occupied 6dB Bandwidth (802.11n-40MHz, Ch 3) ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page30 of 121 Fig.A.4.11 Occupied 6dB Bandwidth (802.11n-HT40, Ch 6) Fig.A.4.12 Occupied 6dB Bandwidth (802.11n-HT40, Ch 9) ©Copyright. All rights reserved by CTTL.

No. I17Z60313-SRD03 Page31 of 121 A.5. Band Edges Compliance Method of Measurement: See ANSI C63.10-2013-clause 6.10.4 Connect the spectrum analyzer to the EUT using an appropriate RF cable connected to the EUT output. Configure the spectrum analyzer settings as described below. a) Set Span = 100MHz b) Sweep Time: coupled c) Set the RBW= 100 kHz c) Set the VBW= 300 kHz d) Detector: Peak e) Trace: Max hold Measurement Limit: Standard Limit (dBc) FCC 47 CFR Part 15.247 (d) > 20 EUT ID: EUT2 Measurement Result: 802.11b/g mode Mode Channel Test Results Conclusion 1 Fig.A.5.1 P 802.11b 11 Fig.A.5.2 P 1 Fig.A.5.3 P 802.11g 11 Fig.A.5.4 P 802.11n-HT20 mode Mode Channel Test Results Conclusion 802.11n 1 Fig.A.5.5 P (HT20) 11 Fig.A.5.6 P 802.11n-HT40 mode Mode Channel Test Results Conclusion 802.11n 3 Fig.A.5.7 P (HT40) 9 Fig.A.5.8 P Conclusion: Pass Test graphs as below: ©Copyright. All rights reserved by CTTL.


Document Created: 2017-04-25 14:00:55
Document Modified: 2017-04-25 14:00:55
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC