I17Z60313-EMC04_Nokia_TA-1039_Part15B Rev0

FCC ID: 2AJOTTA-1039

Test Report

Download: PDF
FCCID_3383097

TEST REPORT No. I17Z60313-EMC04 for HMD Global Oy Smart Phone Model Name: TA-1039 FCC ID: 2AJOTTA-1039 with Hardware Version: 3 Software Version: 000C_3_050 Issued Date: 2017-04-15 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: FCC 2.948 Listed: No. 525429 CTTL, Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China 100191. Tel: +86(0)10-62304633-2512, Fax: +86(0)10-62304633-2504 Email: cttl_terminals@catr.cn, website: www.chinattl.com ©Copyright. All rights reserved by CTTL.

No.I17Z60313-EMC04 Page 2 of 18 REPORT HISTORY Report Number Revision Description Issue Date I17Z60313-EMC04 Rev.0 1st edition 2017-04-15 ©Copyright. All rights reserved by CTTL.

No.I17Z60313-EMC04 Page 3 of 18 CONTENTS 1. TEST LABORATORY ............................................................................................................... 4 1.1. TESTING LOCATION ........................................................................................................... 4 1.2. TESTING ENVIRONMENT ................................................................................................... 4 1.3. PROJECT DATA ................................................................................................................... 4 1.4. SIGNATURE .......................................................................................................................... 4 2. CLIENT INFORMATION ........................................................................................................... 5 2.1. APPLICANT INFORMATION ................................................................................................ 5 2.2. MANUFACTURER INFORMATION ...................................................................................... 5 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................ 6 3.1. ABOUT EUT .......................................................................................................................... 6 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST ................................... 6 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST...................................... 6 3.4. EUT SET-UPS ....................................................................................................................... 7 4. REFERENCE DOCUMENTS .................................................................................................... 7 4.1. REFERENCE DOCUMENTS FOR TESTING....................................................................... 7 5. LABORATORY ENVIRONMENT.............................................................................................. 8 6. SUMMARY OF TEST RESULTS .............................................................................................. 9 7. TEST EQUIPMENTS UTILIZED ............................................................................................. 10 TEST SOFTWARE UTILIZED........................................................................................................ 10 ANNEX A: MEASUREMENT RESULTS ....................................................................................... 11 ©Copyright. All rights reserved by CTTL.

No.I17Z60313-EMC04 Page 4 of 18 1. Test Laboratory 1.1. Testing Location CTTL(huayuan North Road) Address: No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China 100191 1.2. Testing Environment Normal Temperature: 15-35℃ Relative Humidity: 20-75% 1.3. Project data Testing Start Date: 2017-04-11 Testing End Date: 2017-04-12 1.4. Signature Zhang Hui (Prepared this test report) Qu Pengfei (Reviewed this test report) Liu Baodian Deputy Director of the laboratory (Approved this test report) ©Copyright. All rights reserved by CTTL.

No.I17Z60313-EMC04 Page 5 of 18 2. Client Information 2.1. Applicant Information Company Name: HMD Global Oy Address /Post: Karaportti 2, 02610 Espoo, Finland City: Espoo Postal Code: 201203 Country: Finland Contact Person: Mikko Kahlos Contact Email mikko.kahlos@hmdglobal.com Telephone: +358-408036126 Fax: / 2.2. Manufacturer Information Company Name: HMD Global Oy Address /Post: Karaportti 2, 02610 Espoo, Finland City: Espoo Postal Code: 201203 Country: Finland Contact Person: Mikko Kahlos Contact Email mikko.kahlos@hmdglobal.com Telephone: +358-408036126 Fax: / ©Copyright. All rights reserved by CTTL.

No.I17Z60313-EMC04 Page 6 of 18 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT Description Smart Phone Model Name TA-1039 FCC ID 2AJOTTA-1039 Extreme vol. Limits 3.6VDC to 4.2VDC (nominal: 3.8VDC) Note: Components list, please refer to documents of the manufacturer; it is also included in the original test record of CTTL, Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT of People’s Republic of China. 3.2. Internal Identification of EUT used during the test EUT SN or IMEI HW Version SW Version ID* EUT1 356020080007998/35602008008004 3 000C_3_050 *EUT ID: is used to identify the test sample in the lab internally. 3.3. Internal Identification of AE used during the test AE ID* Description SN Remarks AE1 Battery / INBUILT AE2 Battery / INBUILT AE3 Travel charger / / AE4 Travel charger / / AE5 USB cable / / AE6 Headset / / AE1 Model HE316 Manufacturer SCUD(FUJIAN) ELECTRONICS CO LTD Capacitance 3000mAh Nominal voltage 3.82V AE2 Model HE317 Manufacturer SCUD(FUJIAN) ELECTRONICS CO LTD Capacitance 3000mAh Nominal voltage 3.84V AE3/AE4 Model FC0102 Manufacturer Salcomp Length of cable / AE5 ©Copyright. All rights reserved by CTTL.

No.I17Z60313-EMC04 Page 7 of 18 Model CUBB01M-FA010-DH Manufacturer FOXCONN Length of cable 99cm AE6 Model 5CAB5422B-N01-DG Manufacturer FOXCONN Length of cable / *AE ID: is used to identify the test sample in the lab internally. Note: The USB cables are shielded. 3.4. EUT set-ups EUT set-up No. Combination of EUT and AE Remarks Set.2 EUT1+ AE1+ AE3+AE5 Charging mode Set.3 EUT1+ AE1+ AE5 USB mode Note: The Smart Phone TA-1039 manufactured by HMD Global Oy. is a variant model based on TA-1025 for conformance test. According to the declaration of changes, results are inherited from the initial model. The report number of initial model is I17Z60075-EMC04. 4. Reference Documents 4.1. Reference Documents for testing The following documents listed in this section are referred for testing. Reference Title Version FCC Part 15, Subpart B Radio frequency devices - Unintentional Radiators 2015 ANSI C63.4 Methods of Measurement of Radio-Noise 2014 Emissions from Low - Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz Note: The test methods used have no deviation with standards above. ©Copyright. All rights reserved by CTTL.

No.I17Z60313-EMC04 Page 8 of 18 5. LABORATORY ENVIRONMENT Semi-anechoic chamber SAC-2 (10.0m x 6.7m x 6.15m) did not exceed following limits along the EMC testing: Temperature Min. = 15 ℃, Max. = 35 ℃ Relative humidity Min. = 15 %, Max. = 75 % Shielding effectiveness 0.014MHz-1MHz, >60dB; 1MHz - 1000MHz, >90dB. Electrical insulation > 2 M Ground system resistance <4  Normalised site attenuation (NSA) < ±4 dB, 3 m distance Site voltage standing-wave ratio (SVSWR) Between 0 and 6 dB, from 1GHz to 6GHz Uniformity of field strength Between 0 and 6 dB, from 80 to 3000 MHz Shielded room did not exceed following limits along the EMC testing: Temperature Min. = 15 ℃, Max. = 35 ℃ Relative humidity Min. = 20 %, Max. = 75 % Shielding effectiveness 0.014MHz-1MHz, >60dB; 1MHz－1000MHz, >90dB. Electrical insulation > 2 M Ground system resistance <4  ©Copyright. All rights reserved by CTTL.

No.I17Z60313-EMC04 Page 9 of 18 6. SUMMARY OF TEST RESULTS Abbreviations used in this clause: P Pass Verdict Column NA Not applicable F Fail The test is performed in test location 1 which are Location Column 1 described in section 1.1 of this report Clause List Clause in FCC rules Verdict Location 1 Radiated Emission 15.109(a) P 1 2 Conducted Emission 15.107(a) P 1 ©Copyright. All rights reserved by CTTL.

No.I17Z60313-EMC04 Page 10 of 18 7. Test Equipments Utilized CAL DUE CALIBRATION NO. Description TYPE SERIES NUMBER MANUFACTURE DATE INTERVAL 1 Test Receiver ESCI7 100948 R&S 2017-07-05 1 year 2 Test Receiver ESU26 100376 R&S 2017-10-30 1 year Universal Radio 3 CMW500 127406 R&S 2018-01-19 1 year Communication Tester 4 AMN ESH3-Z5 825562/028 R&S 2017-07-06 1 year VULB 5 EMI Antenna 9163-514 Schwarzbeck 2017-11-24 3 years 9163 6 EMI Antenna 3117 00139065 ETS 2017-09-21 3 years Test Software Utilized Test Item Test Software and Version Software Vendor Radiated Continuous Emission EMC32 V9.01 R&S Conducted Emission EMC32 V8.52.0 R&S ©Copyright. All rights reserved by CTTL.

No.I17Z60313-EMC04 Page 11 of 18 ANNEX A: MEASUREMENT RESULTS A.1 Radiated Emission (§15.109(a)) A.1.1 Method of measurement The field strength of radiated emissions from the unintentional radiator (charging mode of MS) at distances of 10 meters(for 30MHz-1GHz) and 3 meters (for above 1GHz) is tested. Tested in accordance with the procedures of ANSI C63.4 - 2014, section 8.3. The EUT was placed on a non-conductive table. The measurement antenna was placed at a distance of 3/10 meters from the EUT. During the tests, the antenna height and the EUT azimuth were varied in order to identify the maximum level of emissions from the EUT. This maximization process was repeated with the EUT positioned in each of its three orthogonal orientations. A.1.2 EUT Operating Mode: The MS is operating in charging mode. During the test MS is connected to a charger in the case of charging mode. A.1.3 Measurement Limit Frequency range Field strength limit (µV/m) (MHz) Quasi-peak Average Peak 30-88 100 88-216 150 216-960 200 960-1000 500 >1000 500 5000 Note: the above limit is for 3 meters test distance. 10 meters’ limit is got by converting. A.1.4 Test Condition Frequency range (MHz) RBW/VBW Sweep Time (s) Detector 30-1000 120kHz (IF Bandwidth) 5 Peak/Quasi-peak Above 1000 1MHz/1MHz 15 Peak, Average ©Copyright. All rights reserved by CTTL.

No.I17Z60313-EMC04 Page 12 of 18 A.1.5 Measurement Results A "reference path loss" is established and the ARpl is the attenuation of “reference path loss”. It includes the antenna factor of receive antenna and the path loss. The measurement results are obtained as described below: Result = PMea + ARpl = PMea + GA + GPL Where GA: Antenna factor of receive antenna GPL: Path Loss PMea: Measurement result on receiver. Measurement uncertainty (worst case): 30MHz-1GHz：U = 4.86 dB, k=2, 1GHz-18GHz：U = 5.26 dB, k=2 . Measurement results for Set.1: Charging Mode/Average detector Measurement Cable Antenna Receiver Antenna Frequency Limit Margin Result loss Factor Reading Pol. (MHz) (dBμV/m) (dB) (dBμV/m) (dB) (dB/m) (dBμV) (H/V) 17804.250 41.3 -23.1 41.0 23.445 54.0 12.7 V 17806.500 41.2 -23.0 41.0 23.290 54.0 12.8 H 17811.000 41.0 -23.0 41.0 23.040 54.0 13.0 V 17805.000 40.9 -23.1 41.0 23.048 54.0 13.1 H 17803.500 40.9 -23.1 41.0 23.053 54.0 13.1 V 17823.750 40.9 -23.2 40.9 23.145 54.0 13.1 H Charging Mode/Peak detector Measurement Cable Antenna Receiver Antenna Frequency Limit Margin Result loss Factor Reading Pol. (MHz) (dBμV/m) (dB) (dBμV/m) (dB) (dB/m) (dBμV) (H/V) 17797.500 53.0 -23.2 41.0 35.218 74.0 21.0 V 17805.750 52.9 -23.1 41.0 34.950 74.0 21.1 H 17812.500 52.6 -23.0 40.9 34.673 74.0 21.4 V 17806.500 52.0 -23.0 41.0 34.101 74.0 22.0 V 17793.000 51.9 -23.3 41.0 34.239 74.0 22.1 H 17847.000 51.9 -23.5 40.9 34.461 74.0 22.1 H ©Copyright. All rights reserved by CTTL.

No.I17Z60313-EMC04 Page 13 of 18 Measurement results for Set.2: USB Mode/Average detector Measurement Cable Antenna Receiver Antenna Frequency Limit Margin Result loss Factor Reading Pol. (MHz) (dBμV/m) (dB) (dBμV/m) (dB) (dB/m) (dBμV) (H/V) 17808.750 41.5 -23.0 41.0 23.553 54.0 12.5 H 17802.000 41.3 -23.1 41.0 23.432 54.0 12.7 V 17798.250 41.2 -23.2 41.0 23.421 54.0 12.8 V 17793.750 41.2 -23.2 41.0 23.483 54.0 12.8 H 17801.250 41.2 -23.1 41.0 23.360 54.0 12.8 H 17797.500 41.2 -23.2 41.0 23.410 54.0 12.8 V USB Mode/Peak detector Measurement Cable Antenna Receiver Antenna Frequency Limit Margin Result loss Factor Reading Pol. (MHz) (dBμV/m) (dB) (dBμV/m) (dB) (dB/m) (dBμV) (H/V) 17816.250 54.0 -23.1 40.9 36.147 74.0 20.0 H 17794.500 53.1 -23.2 41.0 35.389 74.0 20.9 H 17801.250 52.7 -23.1 41.0 34.900 74.0 21.3 V 17790.750 52.5 -23.3 41.0 34.874 74.0 21.5 H 17814.750 52.4 -23.1 40.9 34.557 74.0 21.6 H 17810.250 52.4 -23.0 41.0 34.485 74.0 21.6 V Sample calculation: Average detector , 17816.250MHz Result = PMea + ARpl = PMea(36.147 dBuV) + GA (40.9dB/m)+ GPL (-23.1dB) = 54.0dBuV/m ©Copyright. All rights reserved by CTTL.

No.I17Z60313-EMC04 Page 14 of 18 Charging Mode, Set.1 Fig.1 Radiated Emission from 30MHz to 1GHz Fig.2 Radiated Emission from 1GHz to 3GHz ©Copyright. All rights reserved by CTTL.

No.I17Z60313-EMC04 Page 15 of 18 Fig.3 Radiated Emission from 3GHz to 18GHz USB Mode, Set.2 Fig.4 Radiated Emission from 30MHz to 1GHz ©Copyright. All rights reserved by CTTL.

No.I17Z60313-EMC04 Page 16 of 18 Fig.5 Radiated Emission from 1GHz to 3GHz Fig.6 Radiated Emission from 3GHz to 18GHz ©Copyright. All rights reserved by CTTL.

No.I17Z60313-EMC04 Page 17 of 18 A.2 Conducted Emission (§15.107(a)) A.2.1 Method of measurement For equipment that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits. Tested in accordance with the procedures of ANSI C63.4 - 2014, section 7.2. A.2.2 EUT Operating Mode The MS is operating in charging mode. During the test MS is connected to a charger in the case of charging mode. A.2.3 Measurement Limit Frequency of emission (MHz) Conducted limit (dBµV) Quasi-peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 *Decreases with the logarithm of the frequency A.2.4 Test Condition in charging mode Voltage（V） Frequency（Hz） 120 60 RBW/IF bandwidth Sweep Time(s) 9kHz 1 ©Copyright. All rights reserved by CTTL.

No.I17Z60313-EMC04 Page 18 of 18 A.2.5 Measurement Results Measurement uncertainty: U= 3.38 dB, k=2. Charging Mode, Set.1 Fig.7 Conducted Emission Final Result 1 Frequency QuasiPeak PE Line Corr. Margin Limit (MHz) (dBµV) (dB) (dB) (dBµV) 0.775500 41.4 GND L1 10.7 14.6 56.0 17.101500 41.0 GND L1 11.2 19.0 60.0 17.772000 43.2 GND L1 11.2 16.8 60.0 17.826000 41.7 GND L1 11.2 18.3 60.0 17.997000 40.6 GND L1 11.2 19.4 60.0 18.051000 39.4 GND L1 11.2 20.6 60.0 Final Result 2 Frequency Average PE Line Corr. Margin Limit (MHz) (dBµV) (dB) (dB) (dBµV) 0.775500 33.3 GND L1 10.7 12.7 46.0 0.816000 27.9 GND L1 10.7 18.1 46.0 0.870000 27.0 GND L1 10.7 19.0 46.0 0.901500 21.9 GND L1 10.7 24.1 46.0 0.973500 25.2 GND L1 10.7 20.8 46.0 1.414500 25.3 GND L1 10.7 20.7 46.0 ©Copyright. All rights reserved by CTTL.

No.I17Z60313-EMC04 Page 19 of 18 USB Mode, Set.2 Fig.8 Conducted Emission Final Result 1 Frequency QuasiPeak PE Line Corr. Margin Limit (MHz) (dBµV) (dB) (dB) (dBµV) 0.150000 39.3 GND N 10.6 26.7 66.0 0.195000 46.8 GND L1 10.7 17.0 63.8 0.262500 35.9 GND L1 10.7 25.4 61.4 4.888500 26.7 GND L1 10.8 29.3 56.0 4.956000 26.1 GND L1 10.8 29.9 56.0 23.968500 35.6 GND L1 11.2 24.4 60.0 Final Result 2 Frequency Average PE Line Corr. Margin Limit (MHz) (dBµV) (dB) (dB) (dBµV) 0.168000 34.9 GND L1 10.6 20.1 55.1 0.199500 37.5 GND L1 10.7 16.2 53.6 0.262500 32.6 GND L1 10.7 18.8 51.4 0.325500 24.1 GND L1 10.7 25.4 49.6 4.956000 20.1 GND L1 10.8 25.9 46.0 23.968500 35.7 GND L1 11.2 14.3 50.0 ***END OF REPORT*** ©Copyright. All rights reserved by CTTL.


Document Created: 2017-04-25 10:28:43
Document Modified: 2017-04-25 10:28:43
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC