User Manual

FCC ID: 2AJNM-WG-90

Users Manual

Download: PDF

Scope mounted infra-red
night vision




Operating Instructions


For the following models




                           1


Content
Page 3      Introduction

Page 5      Kit contents overview

Page 6      Scope mount overview
  Page 6    Technical specifications
  Page 8    Setting up and operating instructions
  Page 9    Camera module
  Page 12   MENU
  Page 13   WIFI share
  Page 15   USB connect
  Page 15   Selection of Battery

Page 16     Appendix
  Page 16   Choice of rifle scope and effects of specialist lens coatings
  Page 17   Frequently asked questions
  Page 18   Warranty and Cautions




                                                                            2


Introduction
Congratulations on purchasing a Bestguarder product.
Before you start to use the Bestguarder system ,please
read the user manuel carefully to enjoy optimum
performance and a long service life. Please keep this
manual in a safe place for future reference.
Check whether all the relevant parts are inside the
package .
Important information for your safety.
The Bestguarder system operates on 940NM infrared
LED technology (and it is invisible to the naked eye).
Never look directly into the infrared LEDs. (or direct
the infrared LEDs at any person). Doing so could
seriously hurt your eye sight (or others).
Never leave the Bestguarder product un-supervised
with persons under the age of 16 years.
The model is powered by a lithium-ion polymer battery
pack. Please read carefully the safety information
contained in this manual regarding the 18650 Lithium-
ion battery used.

Scope Mount Products
There are two option models in the scope mount range for you to
choose. The 2.4” LCD and 4.3” LCD. The Bestguarder scope
mount device converts your day rifle combo into a night vision
system, which is quick and simple to use. .
Every Bestguarder share common features
Suitable for use with any rifle, one minute installation, ultra clear
night vision, no need to re-zero, no ambient light required, IR
frequency 940nM, video capture to micro SD card, Wi-Fi buddy
share feature, 2.4 or 4.3 inch display screen with dimmable back

                                                                   3


light, water resistant, can be used both day and night,
rechargeable lithium-ion battery, all in one night vision system.


Please read the relevant information regarding your product
purchase contained in this instruction manual. Bestguarder scope
mount product’s viewing ranges expressed are also dependant
on the scope optic and weather conditions.
Kit Contents
Product items denoted with the model logo, illustrated above, is
applicable to that product model only.

Intended use

The products are added on devices for use with an existing rifle
and scope. They are also for use in daylight. During darkness the
products will achieve a night vision identification range of 500
metres depending on the model purchased, weather conditions
and optic.
Bestguarder does not bear responsibility for the use of this
product in countries or territories where the law prohibits its use.
It is the sole responsibility of the operator to comply with the laws
and regulations of the country or territories where the
Bestguarder add on devices are used.




                                                                   4


Kit Contents Overview




 Kit Components
  1 x Camera module
  1 x 32 GB micro SD card
 1 x Dimmable LCD screen & illuminator module
 1 x Scope clamp 1 inch (25mm)
 1 x Scope clamp 30mm
 1 x Scope sleeve xxm
 1 x Scope sleeve xxm
 1 x Carry case
 1 x Instruction manual
 1 x Guarantee card


     Varies dependant on the product purchased




        4.3” LCD system        2.4” LCD system


                                                  5


Scope Mount Overview
The LCD has an identification range of up to 150-300 metres depending on your scope with zero
ambient light. The LCD allows the user to vary the infra-red light output from zero to maximum
smoothly and silently. The range is obtained by the use of the dynamic patented IR lens system.
The LCD has a colour module for daytime viewing. In darkness the image appears black and
white. The camera has three mode: Photo/Video/Timelapse to recording. The frame resolution is
640 x480. The range has a buddy share feature using WI-Fi. (frequency 2414MHz). This allows
for a single user to share the on screen image via a mobile phone or tablet device. The range has
an LCD screen dimming feature that can reduces the LCD screen brightness from normal all the
way down to off. The LCD supporrt 2-4pcs 18650 batteries (not included), The LCD battery has
an operational run time of 10.0 hours, 4.0 Hrs on full IR power..




Technical Specification

                               4.3" LCD Screen         2.4" LCD Screen
                               Product                 Product
 LCD                                            Ratio 16:9
 Lens                                  Colour IR camera, 1/3 cmos
 IR LED                        3pcs 940nM              1pc 940nM
 Infrared Cut Filter                               Yes
 Dimmable LCD
 screen
                                                               Yes
 LCD                                                      680 x 480
                                                                                              6


                                               150 metres
Distance at full dark   300 metres dependant
night
                                               dependant on the
                        on the scope.
                                               scope.
WIFI share                           Yes, 2414MHz Ch1
WIFI password              8-13 bits (digit+letter), Default:12345678
Picture Size                       12MP, 10MP, 8MP, 6MP
Video Size                         1080P , 720P ( 30FPS),
Audio Recording                              Yes
                             English, Germany, France, Spanish,
Language
                                  Italian,Russian, Japanese

Scope Clamps


Scope Sleeve

                                                 2pcs * 18650
                         4pcs * 18650
                                                 rechargeable
Battery                 rechargeable batteries
                                                 batteries (not
                        (not included)
                                                 included)


Battery house


Support power
bank
                          Yes,5V 2.5A, Connect with Type C scoket
Operational run          up to 15.5Hr approx.    up to 15.5Hr approx.
time                    (3.5Hrs on max IR)       (3.5Hrs on max IR)
Battery re-charge
time
                        approx: 3.5Hrs.           approx: 3.5Hrs.
Video output                          TV:PAL/NTSC
Micro SD card                  Support to 32GB (not included)
USB                                       USB:2.0
Operating Temp.                        -10°C - +45°C
Security                              CE,FCC.RoHs
                                                638grams (included
Weight
                                                batteries)
                                                                    7


Note
Never connect the LCD screen and illuminator module to any
other equipment other than the Bestguarder camera module.
Never connect any other equipment to the Bestguarder (AV)
socket on the back of the camera module. Failure to do so may
result in damage to the Bestguarder equipment and may
invalidate the guarantee.


The Bestguarder equipment is not water proof, only water
resistant. Always cover the equipment in rainy conditions.




Setting up the Bestguarder Equipment
Step 1
Put in batteries. Fully charge the battery before using the
Bestguarder product.
Step 2
Fix the LCD Screen and illuminator module to the scope. Check
the size of the rifle scope and select the appropriate clamp from
the Bestguarder kit. (1 inch or 30mm)
Remove the fixing bolt from the clamp. Open up the clamp and
slid over the scope. Then replace the fixing bolt and knob. Slide
the LCD Screen illuminator module into the slot of the clamp.
Then tighten the knob until the LCD screen and illuminator
module is secure. Check that the LCD screen is facing the eye
piece. Do not over tighten the clamp as this may cause strain
damage to the clamp.
Step 3
Select a rubber scope sleeve to suit your scope, and place onto
the scope eye bell. Push the camera module into the end of the
sleeve. For focussing the camera module,please refer to page
11.
Step 4
                                                               8


Connect the power supply cable and AV cable into socket which
is in front of the camera module. Camera module operating
instructions are detailed on page 11.
Step 5
Turn on the Bestguarder system with the button located in front
of the camera module.
The LCD screen will power on and the Bestguarder system is in
day mode. When in hours of darkness adjust the infra-red LED
intensity level by turning the knob on top of the LCD screen &
illuminator module clockwise until an image appears on the LCD
screen.

Step 6
When in hours of darkness adjust screen brightness level by
turning the knob on top of the LCD screen & illuminator module
clockwise to darker screen.

CAUTION
The Bestguarder product must be used adopting a “heads up”
shooting position. Please ensure the camera module, when fitted
to the scope, is clear of the facial area as the recoil on some
rifles may result in the camera module impacting the face.



Camera Module




                                                             9


1. Focussing
The Bestguarder camera module has a focussing system that allows the user
to focus the reticle prior to use while attached to the scope.




                                               Reticle is out of focus    Reticle is in focus




The camera module has a unique focussing mechanism. This allows the camera lens
to be adjusted via the external focussing dial located on the upper side of the camera
module. The user can focus the camera on the rifle scope reticle without removing the
camera from the rifle scope sleeve. By turning the focussing dial this turns the lens
wheel in the same direction. The Bestguarder camera lens is fully tightened in to the
camera so by turning the focussing lens anti-clockwise when using for the first time will
focus the camera correctly.


2. Recording
Three mode: Photo/Video/Time lapse(photo only) .




   The Bestguarder camera module has the capability to capture all of your
favourite moments simply at the push of a button.
   1) Before powering the camera module, place the micro SD card into the
slot on the face of the camera module. Ensure the micro SD card is fully
inserted as failure to do so will prevent recording to the micro SD card.
   2) Power the camera module via the button on the face of the camera
module. The red light appears steady on the back of the camera unit. The
camera is now ready to record.

                                                                                         10


  Photo mode -- Press REC button to take picture
  Video mode -- Press REC button once to start and press again to end video
 Timelapse mode – Press REC button once, camera is count down 60seconds then
                  start to take photo as setting


 On/Off & REC button

   The record button is situated above the Micro SD card slot on the front of
the camera module. Always use the record button to stop recording before
turn off the camera module. To view the files that have been captured remove
the micro SD card and connect to your PC, laptop or tablet.


 On/Off IR mode button

  Hold on Down button to turn On/Off IR mode. In IR mode, view on screen is
Black and white, recording picture and video in Black and white too. Turn off
IR mode, view on screen is color, capture color picture and video.



MENU
 Long press Up              button to enter/exit MENU setting

      SETUP                             SETUP
     Video Size        1080P           Language           EN
     Time Lapse                        Format
     Date Stamp        OFF             Factory Reset
     Photo Resolution 10M              WIFI Password
     Date & time                       System
      OK
      OK   Enter    MENU
                    MENU   Back         OK   Enter     MENU   Back


 Video Size                       1080P, 720P (30FPS)

                              Start 00:00 End 00:00
 Timelapse
                           Interval:1/3/5/10/30/60 Mins

                                    ON/OFF
 Date Stamp                    GPS Lng: 000.0000N
                                   Lat: 000.0000E
 Photo Resolution               12M,10M,8M,6M
 Date & Time                  YY/MM/DD HH/MM/SS

                                                                          11


                           English, Germany, France,
 Language                   Spanish, Italian,Russian,
                                    Japanese
 Format                              Yes/No
 Factory Reset                       Yes/No
 WIFI Password                 Default:12345678
 System                   VER:00.00.00 (it may update)


Wi-Fi share
The Bestguarder camera module has Wi-Fi capability. This
allows one user at a time to tune in and share the image that is
seen on the rifle mounted LCD Screen & illuminator module.
The range of the Wi-Fi cabability is aproximately 5-6meters if you are viewing
within a vehicle, or up to 15 meters in open areas with a clear line of sight. To
use the Wi-Fi feature, firstly download the free Bestguarder application to your
device via the App store or Google play store. The name of the application is
Bestguarder player. Once the application is downloaded then the correct Wi-Fi
option has to be selected on the viewing device.(tablet or mobile phone) With
holding UP and Down button on camera module to connect WIFI. Select the
settings menu on the chosen viewing device, then select the Wi-Fi options.
The device will start to search for the Wi-Fi. Wait until the Bestguarder option
appears in the menu. The Password is 12345678. Then select the
Bestguarder Wi-Fi option. Once selected leave the settings menu and select
the Bestguarder Player Application on the device. Add the default password
12345678. It will take a few seconds for the camera module and the device to
synchronise.

1) Download "Bestguarder player" Android or IOS APP firstly in the
application store of mobile device, and then install it into the mobile
device. This app is a free application developed by our company.

2) After the application is successfully installed, a small icon
"Bestguarder" will be displayed on the mobile device’s screen.
(See the right picture)


3) Hold “UP”        and “ DOWN”               button together on
camera module to turn on WIFI


4)Mobile device WIFI connection
search the device name "Bestguarder_52F8F9” and connect, WIFI
password shows on screen(default password: 12345678)




                                                                              12


camera module show connecting infomation on screen




5) Click the Bestguarder Player icon , Click “ADD New Camera” to
add a unit and enter Operation interface
Please refer to the following APP operation interface




                                                                   13


Note
When WIFI is connected successfully, camera module and the APP
would be synchronised. Changes on APP will be same on camera
module.



USB connect
  USB connection with the computer
(Refer to the right figure):
The Device must be powered on , use
a USB cable to connect the computer.
After the success of the connection,
you can read, copy, paste, and delete
the image in the memory card.

 TV connection
Use the TV cable to connect the AV
OUT output port, TVOUT can
synchronize the video screen to the
TV, and you can set or shoot the TV
or monitor operation settings.

Selection of battery
The product uses a large-capacity rechargeable lithium-ion battery
(18650, 2200mAh/3.7V).
Attention:
1, The battery have to be with protruding head for positive electrode
2, When charging the battery the first time, it should be charged for
    10 hours for the highest battery level.
3, Put battery in compartment with correct positive electrode and
   negative electrode.




                                                                    14


15


Appendix:

Rifle Scopes and Lens Coatings

The Bestguarder system functions, in night vision mode, with the use of infra-red light. The infra-
red light is emitted from the front of the LCD screen & illuminator module. In darkness the
Bestguarder system relies on the camera module receiving as much infra-red light through the
scope as possible. Some scope manufacturers have a coating that reduces infra-red light
passing through the scope optic. This coating improves the image visibility at low ambient light
levels. The Bestguarder system is not as effective with scope lenses that have such coatings. To
get the best results from the Bestguarder system use a scope that has variable zoom feature with
front or side parallax focus capability. Always check the scope manufacturers instruction details
prior to fitting the Bestguarder system to ensure you get the best results from the product. For
further information please contact customer services.




Harmful emitted infra-red light output, Never look directly




                                                                                               16


Frequently Asked Questions
  The unit is not switching on.           Make sure the battery is fully charged See page 15. Make sure the
                                          battery plug is firmly connected to the camera module power socket.
                                          See? Make sure the on/off button on the back of the camera module is
                                          in the ON position (pushed in)

  Does the Bestguarder unit consume       No. Providing the on/off button on the back of the camera module is in
  power even when the power button        the off position (pushed out) the unit will no longer consume power
                                          No, Bestguarder products are water resistant. Cover the Bestguarder
  Is my Bestguarder water proof?          in rainy
                                          conditions.
                                          You get the very best from the Bestguarder system with turn collar
  What type of scopes work best           zoom
  with the Bestguarder system?            and front or side parallax focussing. Also scopes with fewer or no lens
                                          coatings that can filter out the infra-red light.
  My Bestguarder does not give            The Bestguarder is dependant on the camera receiving as much
  visibility at                           reflected
  night at the ranges specified?          infra-red light from the illuminator as possible. Some scopes have
                                          special coatings that can filter out the infra-red light thus reducing the
                                          range of visibility. Always check your scope manufacturers
                                          details.(See page 18 lens coatings).
                                          Yes. The Bestguarder units have an operating temperature
  Will the Bestguarder work in freezing   approximately
  conditions?                             between -10 and 45 degrees centigrade.
  Can the Bestguarder withstand the       The Bestguarder product has been successfully tested with 100
  recoil                                  rounds
  of large calibre rifles?                consecutively fired from a range of centre fire rifles up to and including
                                          a 0.450 calibre rifle without moderators. Springer air rifles are also
                                          suitable. Please use the anti recoil clamp shown on page 8.

  The rubber scope sleeve does not fit    Try warming the scope sleeve in very hot water (boiling is acceptable)
  my scope eye piece.                     This technique will make the sleeve more pliable to fit over most eye
                                          pieces.

  I cannot mount the scope sleeve on      Try un-screwing the eye piece to its maximum point. This may create a
  my eyepiece because it’s not a          longer distance for the scope sleeve to grip the scope, then follow the
  perfect circle                          instructions for re-focus the camera module on page 7 & 8.

  I cannot get my scope cross heir in     It is likely that the perfect focal point has been missed. Turn the lens
  focus.                                  fully clockwise until it can be turned no further. Carefully follow the
                                          focussing process on page 7 & 8.
  The Wi-Fi buddy share is not            Turn off and on the camera module and wait for the device to
  working.                                synchronise with the camera module. Also try turning the Wi-Fi off and
                                          on again on viewing device.
  When I use the zoom feature on my       This is a normal feature of the Bestguarder system the scope when
  scope the distance I can see is         increasing the magnification is reducing the angle of vision thus
  reduced.                                reducing the visible light therefore reducing the visible range.

  There is no image on my LCD             Check that the LCD screen dimmer has not been turned down to
  screen when I switch on the unit        the off position (fully anticlockwise)




For more Frequently asked questions go to our website at www.Bestguarder.com or visit our
Bestguarder Amazon store




                                                                                                                 17


Warranty and Cautions
                                                         Warranty
   Your device is covered by warranty on parts and labor from the date of original purchase, and purchases must be made
through the authorized dealer. Warranty period is complying with dealers’ legal requirement. The warranty covers defects in
workmanship and materials. The warranty does not apply to units, which have been damaged or abused intentionally or
unintentionally. A purchase from individuals or unauthorized internet sites such as eBay voids the warranty.
  Tampering with or altering the unit will void the warranty. Any unauthorized service will void warranty. A copy of your original
sales receipt must be produced for any warranty service.



                                   WARNING:
                                   Reading User’s manual before using it.
                                   Changes or modification to this unit not expressly approved by the party
                                   responsible for compliance could void the user’s authority to operate the
                                   equipment.



   Cautions:
        Please install batteries according to shown polarity.
        Please use good quality AA batteries and take out batteries when device will not be used for longer then a few weeks.
        It is recommended to format the Micro SD-card by the camera when used at the first time.
        Keep the device away from any heating and air conditioning vents or other heating devices, direct sunlight, and
         moisture.
        Always store the unit in its carrying case in a dry well ventilated space in temperature above +15°C(60°F). Do not store
         near heating devices. Do not store in direct sunlight or high humidity conditions (higher than 70%)

   NOTE: This camera is a precision electronic device. Do not attempt to service his camera yourself, as
   opening or removing covers may expose you to dangerous voltage points or other risks.




   FCC NOTE
   This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
   the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
   installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
   accordance with the instructions, may cause harmful interference to radio communications. However, there is no
   guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
   radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
   to correct the interference by one or more of the following measures:

   • Reorient or relocate the receiving antenna.
   • Increase the separation between the equipment and receiver.
   • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
   • Consult the dealer or an experienced radio/TV technician for help.

   Shielded interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant
   to Subpart B of Part 15 of FCC Rules.
   Specifications and designs are subject to change without any notice or obligation on the part of the manufacturer.




                          Disposal of Electric and Electronic Equipment
           (Applicable in the EU and other European countries with separate collection systems)

   This equipment contains electric and/or electronic parts and must therefore not be disposed of as normal
   household waste. Instead, it should be disposed at the respective collection points for recycling provided
   by the communities. For you, this is free of charge.
   If the equipment contains exchangeable (rechargeable) batteries, these too must be removed before and,
   if necessary, in turn be disposed of according to the relevant regulations (see also the respective
   comments in this unit’s instructions). Further information about the subject is available at your community
   administration, your local waste collection company, or in the store where you purchased this equipment.

                                                                                                                             18


   FCC Statement
    This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
   -Reorient or relocate the receiving antenna.
   -Increase the separation between the equipment and receiver.
    -Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
   -Consult the dealer or an experienced radio/TV technician for help.
   To assure continued compliance, any changes or modifications not expressly
approved by the party.
   Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).


    This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
   (1) This device may not cause harmful interference, and
   (2) This device must accept any interference received, including interference that
may cause undesired operation.
   RF warning statement:
   The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.



Document Created: 2019-05-08 09:54:37
Document Modified: 2019-05-08 09:54:37

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC