RF Exposure

FCC ID: 2AJMW-MS500B

RF Exposure Info

Download: PDF
FCCID_3956413

Reference No.: WTD18S07118156-2W FCC ID: 2AJMW-MS500B RF Exposure Report Test Requirement: FCC Part 1.1307 Evaluation Method: FCC Part 2.1091 & KDB 447498 D01 General RF Exposure Guidance v06 Requirements Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. The procedures / limit (A) Limits for Occupational / Controlled Exposure Magnetic Field Averaging Time Frequency Range Electric Field Power Density (S) Strength (H) |E|2,|H|2or S (MHz) Strength (E) (V/m) (mW/ cm2) (A/m) (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Magnetic Field Averaging Time Frequency Range Electric Field Power Density (S) Strength (H) |E|2,|H|2 or S (MHz) Strength (E) (V/m) (mW/ cm2) (A/m) (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz; *Plane-wave equivalent power density Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

MPE Calculation Method P G S＝ 4   R2 S = power density (in appropriate units, e.g. mW/cm2) P = output power to the antenna (in appropriate units, e.g., mW). G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain. R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) From the peak EUT RF output power, the minimum mobile separation distance, R=20cm, as well as the gain of the used antenna, the RF power density can be obtained Max. conducted Limit of Antenna Max. conducted Power Antenna Power Gain Output Power Output Power Density Reult Gain (dBi) Density (numeric) (dBm) (mW/cm2) (mW) (mW/cm2) 0.0 1.0 0.76 1.19 0.000237 1 Compliance Result: Compliance No SAR measurement is required. ======End======


Document Created: 2018-08-06 22:38:08
Document Modified: 2018-08-06 22:38:08
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC