User Manual

FCC ID: 2AJK8-SWB1

Users Manual

Download: PDF
FCCID_3453950

Dear Users: ·Security mechanism:WEP/WPA-PSK/WPA2-PSK Thank you very much for choosing our company's Wi-Fi smart power strip, and this product adopts the current emerging Wi-Fi III. APP Operation technology and top manufacturing process, which is developed integrating years of R&D experience. The product can support mobile APP to perform local and remote control of electrical Scan the QR code on the User Manual to download the App, device at home (such as lighting, electric fan, humidifier, etc.). open the app, click “Register ”, Enter your phone number (Select For proper installation and usage of the product, please read your country code, so that you can receive a verification code.) this instruction carefully. Then enter the verification code. Wi-Fi Smart Power Strip l. Product Features Set your password with 8 to 20 alphanumeric NOTE: Before device connection, it is required to reset the device User Manual 1. Support Wi-Fi2.4GHz 802.11 b/g/n wireless network. (See FAQs for reset method) 2. SmartLink flash connection net in. (Model: SWB1) 3. Status indication. 4. Power consumption indicator. (Optional) See specific operation on << Operation Instruction>> 5. Support remote / local control through Wi-Fi networks. 6. The output can be controlled individually. 7. Support USB output.(Optional) ll. Product Parameters ·Voltage: AC 100-240V ·Current: 10A ·Rated frequency: 50 / 60Hz ·USB output: 5V / 1A per port (Optional) ·Product size: 260 x 60 x 26mm ·Working environment: Indoor ·Working temperature: -10~45°C ( Scan QR Code to find the Operation Instruction ) ·Humidity:≤80% RH ·Security type:WEP64/WEP128/TKIP/CCMP(AES) To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum IV. FAQs 3. Undesirable phenomena due to the extreme environment distance between 20cm the radiator your body: Use only the rather than the inherent causes of this product (such as supplied antenna. lightning, flood,fire, etc) . FCC ID: 2A JK8-SWB1 Q： What should I do if I cannot connect the Wi-Fi smart power strip? 4. This product has been opened or disassembled. A: a. Check whether the devices are connected to the same Wi-Fi 5. Badness caused by any usage, maintenance or custody not on which your smart phone is connected. according to the product specifications (such as moisture, corrosion). b. Check whether the password of the Quick configuration entered is correct. 6. Product badness, appearance deformation, appearance damage or any other physical damage caused by external forces. c. Reset the device. d. Reboot the device. VI. Warning Q: How do I reset the device? A: Under power-on status, press and hold the power button 6 This device complies with part 15 of the FCC Rules. Operation is seconds until the indicator light fast blink. subject to the following two conditions: (1) this device may not iOS APP Android APP Q: I have accessed the device, but I cannot control electrical cause harmful interference, and (2) this device must accept any appliances, what should I do? interference received, including interference that may cause undesired operation. ( Scan QR Code to download our APP ) A: a. Check whether the electrical appliances are connected to power supply. Any changes or modifications not expressly approved by the party responsible for compliance b. Check whether your mobile phone has normal network access. could void the user's authority to operate the equipment. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one V．Instructions or more of the following measures: -- Reorient or relocate the receiving antenna. The one year warranty of our company's product only applies to -- Increase the separation between the equipment and receiver. the situation that all the operations comply with the -- Connect the equipment into an outlet on a circuit different instructions. The following situations are not covered by the from that to which the receiver is connected. warranty: -- Consult the dealer or an experienced radio/TV technician for 1. Any change, correction, abridged or illegible handwriting on help. the purchase tags or product instructions. 2. Malfunction caused by damage, incorrect connection or misusage.


Document Created: 2017-07-05 08:47:14
Document Modified: 2017-07-05 08:47:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC