RF exposure

FCC ID: 2AJIV-MF1690

RF Exposure Info

Download: PDF

FCCID_4330720

$Reference No.: WTS19S04027029W002 Page 3 of 7 1.1 Test Facility A. Accreditations for Conformity Assessment (International) Country/Region Scope Covered By Scope Note USA FCC ID \ DOC \ VOC 1 Canada IC ID \ VOC 2 Japan MIC-T \ MIC-R - Europe EMCD \ RED - Taiwan NCC - ISO/IEC 17025 Hong Kong OFCA - Australia RCM - India WPC - Thailand NTC - Singapore IDA - Note: 1. FCC Designation No.: CN1201. Test Firm Registration No.: 523476. 2. ISED CAB identifier: CN0013. B.TCBs and Notify Bodies Recognized Testing Laboratory. Recognized Testing Laboratory of … Notify body number TUV Rheinland Intertek Optional. TUV SUD SGS Phoenix Testlab GmbH 0700 Element Materials Technology Warwick Ltd. 0891 Timco Engineering, Inc. 1177 Eurofins Product Service GmbH 0681 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn$

Reference No.: WTS19S04027029W002 Page 4 of 7

2 Contents
Page
COVER PAGE ........................................................................................................................................... 1
1 LABORATORIES INTRODUCTION ................................................................................................................... 2
1.1 TEST FACILITY ................................................................................................................................................. 3
2 CONTENTS ............................................................................................................................................................ 4

3 REVISION HISTORY ............................................................................................................................................ 5
4 GENERAL INFORMATION .................................................................................................................................. 6
4.1 GENERAL DESCRIPTION OF E.U.T ................................................................................................................. 6
4.2 DETAILS OF E.U.T........................................................................................................................................... 6
5 FCC ID: 2AJIV-MF1690 RF EXPOSURE REPORT ........................................................................................ 7
5.1 REQUIREMENTS............................................................................................................................................... 7
5.2 THE PROCEDURES / LIMIT................................................................................................................................ 7
5.3 RESULT: COMPLIANCE .................................................................................................................................... 7

Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn

Reference No.: WTS19S04027029W002 Page 5 of 7

3 Revision History
Date of
Date of
Test report No. Receipt Date of Test Purpose Comment Approved
Issue
sample

2019-04-31
WTS19S04027029W002 2019-04-30 to 2019-06-04 original - Valid
2019-05-17

Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn

Reference No.: WTS19S04027029W002 Page 7 of 7

5 FCC ID: 2AJIV-MF1690 RF Exposure Report
Test Requirement: FCC Part 1.1307
Evaluation Method FCC Part2.1093 & KDB 447498 D01 General RF Exposure Guidance v06
5.1 Requirements

1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances
≤50 mm are determined by:
[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√
f(GHz)] ≤3.0 for 1-g SAR and ≤7.5 for 10-g extremity SAR where

1. f(GHz) is the RF channel transmit frequency in GHz
2. Power and distance are rounded to the nearest mW and mm before calculation
3. The result is rounded to one decimal place for comparison
The test exclusions are applicable only when the minimum test separation distance is ≤50 mm and
for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation
distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion.
5.2 The procedures / limit

Source-based Minimum test SAR Test
SAR Test
Conducted Conducted time-averaged separation distance Exclusion
Exclusion
Peak Peak maximum required for the Thresholds Result
Thresholds
power(dBm) power(mW) conducted output exposure conditions Calculation
Limit
power(mW) (mm) Value
1.76 1.50 1.50 5 0.473 3.0 Compliance
Remark: Max. duty factor is 100%
Low Chanel: f=2402MHz=2.402GHz, so √f(GHz)=1.550
High Chanel: f=2480MHz=2.480GHz, so √f(GHz)=1.575

5.3 Result: Compliance
No SAR measurement is required.

======End of Report======

Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn

Document Created: 2019-06-25 03:55:31
Document Modified: 2019-06-25 03:55:31