RF Exposure Info

FCC ID: 2AJIV-GH0380A

RF Exposure Info

Download: PDF
FCCID_4283439

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180900837905 Page: 1 of 8 1 Cover page SAR Evaluation Report Application No.: SZEM1809008379CR Applicant: Creative Labs Pte. Ltd. Address of Applicant: 31 lnternational Business Park, #03-01 Creative Resource, Singapore 609921 Manufacturer: Creative Labs Pte. Ltd. Address of Manufacturer: 31 lnternational Business Park, #03-01 Creative Resource, Singapore 609921 Equipment Under Test (EUT): EUT Name: Creative SXFI TX Model No.: GH0380A Trade mark: CREATIVE FCC ID: 2AJIV-GH0380A Standards: 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2018-09-19 Date of Test: 2018-09-30 to 2019-04-15 Date of Issue: 2019-04-19 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. Keny Xu EMC Laboratory Manager

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180900837904 Page: 2 of 8 2 Version Revision Record Version Chapter Date Modifier Remark 01 2019-04-19 Original Authorized for issue by: Vincent Chen /Project Engineer Eric Fu /Reviewer

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180900837904 Page: 3 of 8 3 Contents Page 1 COVER PAGE .............................................................................................................................................. 1 2 VERSION ...................................................................................................................................................... 2 3 CONTENTS .................................................................................................................................................. 3 4 GENERAL INFORMATION .......................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ............................................................................................................. 4 4.2 TEST LOCATION...................................................................................................................................... 5 4.3 TEST FACILITY........................................................................................................................................ 5 4.4 DEVIATION FROM STANDARDS ................................................................................................................. 6 4.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................... 6 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER ............................................................................. 6 5 SAR EVALUATION ...................................................................................................................................... 7 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ............................................................................................ 7 5.1.1 Standard Requirement ..................................................................................................................... 7 5.1.2 Limits ................................................................................................................................................ 7 5.1.3 EUT RF Exposure ......................................................................................................................... 7-8

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180900837904 Page: 4 of 8 4 General Information 4.1 General Description of EUT Power supply: USB Dongle powered by DC 5V, 0.5A from USB port; Cable: USB switch cable 143cm shielded For BLE Operation Frequency 2402MHz to 2480MHz Bluetooth version 5.0 Modulation Type GFSK Number of Channels 40 Channel Spacing 2MHz Antenna Type Chip Antenna Antenna Gain 0.8dBi For 2.4G Operation Frequency 2403.35-2479.35MHz Modulation Type GFSK Number of Channels 39 Channel Spacing 2MHz Antenna Type Chip Antenna Antenna Gain -1.18dBi

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180900837904 Page: 5 of 8 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0006. IC#: 4620C.F

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180900837904 Page: 6 of 8 4.4 Deviation from Standards None. 4.5 Abnormalities from Standard Conditions None. 4.6 Other Information Requested by the Customer None.

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180900837904 Page: 7 of 8 5 SAR Evaluation 5.1 RF Exposure Compliance Requirement 5.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1—g head or body and 10—g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. 5.1.2 Limits The 1—g and 10—g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances < 50 mm are determined by: [(max. power ofchannel, including tune—up tolerance, mW) / (min. test separation distance, mm)] [Vfiem»/x] Wikg. for test separation distances < 50 mm: where x= 7.5 for 1—g SAR and x= 18.75 for 10—g SAR. where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation‘" The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is s 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion 5.1.3 EUT RF Exposure For BLE: The Max. power (including tune—up tolerance) is 0.26 dBm on the lowest channel 2.402 GHz (*) 0.26 dBm logarithmic terms convert to numeric result is nearly 1.06 mW According to the formula. calculate the test exclusion thresholds: [(max. power ofchannel, including tune—up tolerance, mW) / (min. test separation distance, mm)] [Vfiee»y/x] W/kg. for test separation distances < 50 mm: where x=7.5 for 1—g SAR and x=18.75 for 10—g SAR. General RF Exposure =1.06mW / 5mm x (/2.402/7.5)=0.044 W/kg (1) SAR requirement: <1.6W/kq (2) (1) <(2) So the SAR report is not required. (*) Max power refer to Report No.: SZEM180900837902 Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at hitp:!/www.sgs.comfen/Terms—and—Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at hitpJwwn.oas.comfen/Terms—and—Gonditions/Terms—6—Document.aspx Attention is drawn to the limitation of labilty, indemnification and Jurisdiction issues defined tharein. Any holder of this document is advised that information contained hereonreflects the Company‘s findings at the time of its intervention only and within the limits of Clients instructions, if any. The Company‘s sole responsiblity is to its Client and this document does not exonerate parties to a transaction from exereising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsifation of the content or appearance of this documentis unlawiul and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample() tested and such sample(s) are retained for 30 days only. Attention: To check the authenticity of testing /inspoction report & certificate, please contact us at telephone: (86—755) 8307 1443, or email: CN.Doecheck@sgs.com o. lt No.t WortshopN10 l Secton, Science 8 Technology Par; Shenzhen,China 518057 t (86—755) 26012053 f (86—788) 26710504 ww sgsgroup.com.en abortoy #B —RHI— ARRIHEM—10H—S1B #BSA: 518057 t (€6—750)26012058 f (86—755) 26710504 sgo:china@egs.com Member of the SGS Group (SGS SA)

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180900837904 Page: 8 of 8 For 24G For Dongle The Max. power (including tune—up tolerance) is 1.84 dBm on the lowest channel 2.40335 GHz (*) 1.84 dBm logarithmic terms convert to numeric result is nearly 1.53 mW According to the formula. calculate the test exclusion thresholds: [(max. power ofchannel, including tune—up tolerance, mW) / (min. test separation distance, mm)] [Yfren»‘x] W/kg. for test separation distances < 50 mm: where x=7.5 for 1—g SAR and x= 18.75 for 10—g SAR. General RF Exposure =1.53mW / 5mm x (/2.40335/7.5)=0.063 W/kg (1) SAR requirement: <1.6W/kq (2) (1) <(2) So the SAR report is not required. (*) Max power refer to Report No.: SZEM180900837903 Simultaneous transmission: General RF Exposure=0.044+0.063=0.107W/kg (1) SAR requirement: <1.6W/kg (2) (1)<(2) So the SAR report is not required — End of the Report — Unless otherwise agreed in writing, this document is issued by the Company subject to its General Conditions of Service printed overieaf, available on request or accessible at hitp:/wwwsgs.com/en/Terms—and—Conditions.aspx and, for electronic format documents, subject io Terms and Conditions for Electronic Documents at hitp:Jwwn.egs.comfen/Terms—and—Conditions/Terms—©—Document.aspx Attention is drawn to the limitation of lability, indemnification and Juriedietion issues defined therein. Any holder of this document is advised that information contained hereonreflects the Company‘s findings at the time of its intervention only and within the limits of Client‘s instructions, if any. The Company‘s sole responsibllty is to its Client and this document does not exonerate parties to a fransaction from exércising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsifation of the content or mt d , appearance of this documentis unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the Inpecton TesingSerices . results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Aftention: To check the authentiity of testing /inspection report & certificate, please contact us at télephone: (86—755) 8307 1443, or email: CN.Doccheck@sas.com S6S—CSIN s Co. id No.t WortshopN10 l Secton, Science 8 Technology Par; Shenzhen,China 518057 t (86—755) 26012053 f (86—788) 26710504 ww sgsgroup.com.en ShewhenBant sboraoy #B —RHI— ARRIHEM—10H—S1B #BSA: 518057 t (€6—750)26012058 f (86—755) 26710504 sgo:china@egs.com Member of the SGS Group (SGS SA)


Document Created: 2019-05-16 03:45:24
Document Modified: 2019-05-16 03:45:24
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC