Users Manual

FCC ID: 2AJFZ-MBC005

Users Manual

Download: PDF
FCCID_3203000

CSR Bluetooth Modules MBC005 Specification Version 1.1 05-Aug.-2016 Product No.: MBC005 Product Description: Bluetooth v3.0 Class 2 BT Stereo Module Issue Date: 2016/08/05 Release Version: 1.1

Documentation History Revision Description Date Remark V0.1 MBC005 Aug 2009 V1.0 MBC005 Jan 2012 V1.1 MBC005 with SPP Jan 2015 profile

Content Features ....................................................................................................................................................................4 Hardware & Technical Information .........................................................................................................................5 Mechanical Specification .........................................................................................................................................6 Reference Schematic................................................................................................................................................6 Electrical Characteristics .........................................................................................................................................7 Software specification..............................................................................................................................................9 Ordering Code........................................................................................................................................................10

Features CSR BlueCore05 Chip. Bluetooth v3.0 Compliant. Bluetooth Class2 RF. Up to 10 meters transmission distance. Supported A2DP, HFP, AVRCP, PBAP(Phone Book Access Profile),SPP and Easy pairing. Fully configurable with simple AT style commands over UART and Bluetooth connections. On board printing antenna and external antenna versions. Support Single End Audio output. Dimension: 35X25X2.7mm. Castellated SMT pads or 10 PIN pitch 2.0mm connector easy and reliable PCB mounting. Description MBC005-CAR-AT audio transmitter/Receiver is power by CSR BC05 technology. That provides a complete 2.4GHz Bluetooth technology for stereo music transmission. The MBC005-CAR-AT module is compliant with Bluetooth specification v3.0 and support A2DP, AVRCP, HFP, SPP and PBAP(Phone Book Access Profile). It is the class 2 module with build in antenna. Reduce the effort on the RF section when the engineer designs it into the system. SmartDesign also customize the software to meet the requirement from customer. Block Diagram MBC005 Class2 Module Block Diagram

Hardware & Technical Information Pin Definition PIN Name Type Note 1 R_SPK O Right side audio out put 2 L_SPK O Left side side audio output 3 SPK_GND O Ground for speaker 4 MIC+ I Microphone + 5 MIC- I Microphone - 6 VCC PWR Power input 7 GND PWR Ground 8 TX O UART TX 9 RX I UART RX 10 INT O Interrupt 11 GND PWR Ground 12 GND PWR Ground 13 GND PWR Ground VCC Supply voltage at this pin with 5 V. GND Connect GND pins to the ground plane of the PCB. RX RX is used to implement UART data transfer from another device to MBC005-CAR-AT. The UART interface requires an external RS232 transceiver chip. TTL level. TX TX is used to implement UART data transfer from MBC005-CAR-AT to another device. TTL level. L_SPK Left channel audio output. The audio output line is the single-ended. Use low impedance ground plane dedicated for the audio signals. R_SPK Right channel audio output. The audio output line is the single-ended. Use low impedance ground plane dedicated for the audio signals SPK_GND Audio ground. Connect to right and left Audio line. MIC+ and MIC- Audio inputs. This audio input can be configured to microphone or line input. Route differential pairs close to each other and use a solid dedicated audio ground plane for the audio signals. INT Interrupt output. Normally keep in “Low”. Change to “High” when Audio output.

Mechanical Specification 10 PINs Pitch 2.0 unit: mm MBC005 CLASS2 Mechanical Specification Reference Schematic

Electrical Characteristics ▓ Voltage Input MIN Typ. MAX Unit Supply Voltage 3.5 5 5.3 V ▓ Power Consumption Mode Avg. Standby 10mA HFP 26mA A2DP 39mA Link 11mA ▓ Operating Conditions Voltage Range 3.5-5.3V Operating Temperature Range -20°C ~ 70°C Storage Temperature Range -30°C ~ 80°C Relative Humidity (Operating) <=90% Relative Humidity (Storage) <=90%

Radio Characteristics Frequency MIN TYP MAX BT Spec Unit (GHz) 2.402 ≤-84 -80 - dBm Sensitivity at 0.1%BER 2.441 ≤-84 -80 - <= -70 dBm 2.480 ≤-84 -80 - dBm 2.402 -2 0 4 dBm RF Transmit Power 2.441 -2 0 4 <= 4 dBm 2.480 -2 0 4 dBm 2.402 - 5 75 kHz Initial Carrier Frequency 2.441 - 5 75 75 kHz Tolerance 2.480 - 5 75 kHz 20dB bandwidth - 900 1000 kHz <=1000 for modulated carrier Drift (Five slots packet) - 15 - 40 kHz Drift Rate - 13 - 20 kHz 2.402 140 165 175 kHz ∆f1 avg 2.441 140 165 175 140 < ∆f1 avg kHz “Maximum Modulation” 2.480 140 165 175 kHz 2.402 115 190 - kHz ∆f2 max 2.441 115 190 - 115 kHz “Minimum Modulation” 2.480 115 190 - kHz

Software specification Profile Model name \ MBC005-AT2 Profile Control AT command Flash Memory 16 MB Command A2DP_AT_Commands_v2.0d Manual A2DP V HFP V AVRCP V PBAP V SPP V Software function MBC005-CAR-AT will act only when you send AT command. Detailed AT command, please check the document. Default setting Information Parameter Value 1 Baud Rate 9600 2 Pin Code Prompt 0000 3 Local Name MBC005-CAR 4 SYNC/AG SYNC module

Ordering Code Order code Description Remark MBC005-AT2 MBC005-CAR-AT with A2DP, HFP, AVRCP, PBAP , SPP AT command profile

Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. The end product with this module may subject to perform FCC part 15 unintentional emission test requirement and be properly authorized. This device is intended for OEM integrator only. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

USERS MANUAL OF THE END PRODUCT: The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX FCC ID: 2AJFZ-MBC005 ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.


Document Created: 1640-11-12 00:00:00
Document Modified: 1640-11-12 00:00:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC