Users Manual

FCC ID: 2AJDD-FOBD

Users Manual

Download: PDF
FCCID_4174758

-FCQQ FCAR FOBD User Manual of Oil Maintenance Tool STATEMENT e This manual is designed for the use of FCAR FOBD oil maintenance tool,Without the written consent of FCAR Technologies Limited, no company or individual shall copy and back up this instruction in any form (electronic, mechanical, photocopying, recording or other form). ® This manualis only for professional automobile maintenance technicians. ® This manual only provides the use and operation methods of FCAR products. The company will not bear any responsibility for the consequences caused by the use and operation methods of FCAR products for other equipment operation. ® FCAR company shall not be liable for any accident caused by the personal use of the user or the use of a third party, or for any expenses or expenses incurred by the abuse, misuse, unauthorized alteration, repair or failure to meet the requirements of the manual for operation and maintenance of the equipment resulting in the damage or loss ofthe equipment. ® This manual is based on the existing configuration and functions of the product. If new configuration and functions are added to the product, the manual will be changed without notice. If you have any questions, please contact us by the following ways: Headquarters: 8F, Chuangyi Bldg., No. 3025 Nanhai Ave., Nanshan, Shenzhen, China 518060 Factory: West 1F, Bldg. B, Hengchao Industrial Park, Tangtou North Ave., Bac‘an, Shenzhen, China 518108 Tel: 0086—755—82904730 Fax: 0086—755—83147605 E—mail: marketing@szfear.com Website: http://www.fear.com

«ECaM FCAR FOBD User Manual of Oil Maintenance Tool! Registered Trademark FCAR company has registered its trademark in several countries both in China and abroad, its logo is «FCaMN .In countries where FCAR trademarks, service marks, domain names, icons and company names have not yet been registered, FCAR declares that it still has ownership of its unregistered trademarks, service marks, domain names, icons and company names. The trademarks of other products and other company names mentioned in this manual are still owned by the original registered company. No one shall use the trademark, service mark, domain name, icons and company name of the company without the written consent of the company.

-FCQQ FCAR FOBD User Manual of Oil Maintenance Tool Catalog STATEMENT .000 0000000000000 09e en en en rere en nere en nee en nee en enee nenenenevnenenee nenenee nenenee e en 1 1. PRODUCT BRIEF ...22. .00 00 0000 e00 000 e00e en en verernenereenenee en nee n enee n enenevnenenee ns neeee 4 1. 1 PRODUCT APPEARANCE STRUCTURE..... 1.2 PRODUCT TECHNICAL PARAMETERS: 1.3 ADAPTER TYPE: .......ccoccscmememmmememmemmemeemeememenenememeereereerenmenrenmnremeenmencenne 5 2. CONNECTING VEHICIB: .:. .0 00 000000000 e0e 0e ener e rneverernever ns ver n rnee en eneneenene ns 5 3. OBD—TH. .02 0e e00e00 en vere en ver vevee n en vere en rere en nee sns nee en enee n en nevnenenee nemenee en enee e en 6 3.1 READ TROUBLE CODE..... 3.2 CLEAR TROUBLE CODE 3.3 READ DATA STREAM .... 3.4 FREEZE FRAME DATA a2.22.00.00 .00 e00e00e00en0 en en en en n ennennnennnnennnnennnnennnnnnennnenne 10 3.5 02 SENSOR TEST ... 22. 00000 e0ee0een0 en en en nnnnnnnnennennnennnnnnennennennnnennnnennnennenne 11 3.6 IN—USE MONITOR... 3.7 COMPONENT TEST. 3.8 ECU INFORMATION .222 000000 e0ee00en0 en en en nnnnnnnnnnennennnnnnnnnnnnnnnnnneennenne 13 4. SERVICE RESET .2 .200 000000 0 en eee en vervrnevervrnever en rnee en en nernenenee ns neeeneneeen 14 SHTUD ass en en en n en ver n vee n rnee en en n en n en nee sns nee en enee n en nevn en nee nemenee en enee en 16 6.DTC SEARCBHING 1210200 000000000 eere en ver never vever n rnee en rnevernrnenee en nee n enee n 16 7T.SETTINGPS 1200 n e0 0000 n0e en ener en vee n vee en nee en rnve en en n en nee en nee en enee n enee e ene 17 7.1 LANGUAGE SETTING.. 7.2 UNIT SETTING..... 7.3 FOBD INFORMATION. 7.A UPGRADE FIRMWARE .n..00.00.00 0000000000000 en en en en n en ennennnnennennennnnennennennennnenne 19 7.5 DATA PLAYBACKn20n00 0000000000000 e n en en ennennennennennnnennnennennennennennennennennennennnennenne 20 WARRANTY CLAUSE ..2 1 ..0 0000000 ve0 e revevevnveve e reve n rnenerernvnvevenenve sn enreven 22

-FCOQ FCAR FOBD User Manual of Oil Maintenance Tool 1. Product Brief FOBD is a portable vehicle detection and oil lamp reset tool introduced by FCAR company for the majority of vehicle owners. Vehicle owners can run diagnostic procedures on their mobile phones to monitorthe running status of the vehicle, to help them keep abreast of the working conditions of the vehicle engine at any time, for easy follow—up maintenance; and the additional oil lamp reset function can allow car owners to change their oil when they are free. 1.1 Product Appearance Structure _., Standard OBD II—16 Interface %——«Operating Indicator bottom

-FCOQ FCAR FOBD User Manual of Oil Maintenance Tool Serial Name ; Describe number Standard OBDI—16 Interface, connecting with 0) OBDII—16 Interface vehicle diagnostic seat compatible with standard OBD—II interface When the power supply ofthe diagnostic seat is obtained, the red light is turned on, and the @ Indicator lamp green light is turned on when the ECU can communicate normally with the vehicle. 1.2 Product Technical Parameters: Operating temperature 0°C — 50°C Storage temperature 20°C — 80°C Tnput voltage 9—18V Product size 60mm *46mm *23mm Weight About 35g 1.3 Adapter Type: IOS version: this diagnostic program supports IOS version 10.0 and above Android version: this diagnostic program supports Android version 4.4 and above 2. Connecting Vehicle 1) Find the diagnostic seat of OBD—II vehicle compatible with the standard. 2) 2. Connect the OBDII—16 interface of the FOBD to the vehicle diagnostic seat. At this time, the FOBD is powered by the vehicle diagnostic seat, and the

-FCOQ FCAR FOBD User Manual of Oil Maintenance Tool power indicator light is on; 3) 3. Run the FOBD diagnostic program on the mobile phone to open the Bluetooth of the mobile phone. The program automatically searches for nearby Bluetooth and performs Bluetooth matching. When the Bluetooth icon changes from" ”to“ ".the matching is successful and the vehicle diagnosis can be performed. FOBD Tip: When Bluetooth matching is performed for the first time, in order to facilitate quick matching, FOBD diagnostic program should be run first, then prompt will be popped up, and then Bluetooth of mobile phone will be opened to complete matching. 3. OBD—II 3.1 Read Trouble Code Read and display the fault code information retrieved from the vehicle system module, as shown in the figure:

.FCOQ FCAR FOBD User Manual of Oil Maintenance Tool Eoig) Read Trouble Code Read Trouble Code > br elcu Ee Clear Trouble Code > pans enentemnel Sett 99 etory poys [atate veahecomel sstentld wigry @ Read Data Stream > Poaas |Erapore fonCl S¥stem| wiaoy Purge C Vave 0 P1S73 |Throtle Postion Not Avaiable Histoy Freeze Frame Data > poree Mass or Volume AlrFlow Cieut Lowut Hister * MAP/BarometiPressureGrout porss |Mht/Bare xo History Coolent Temperature . ‘an) 02 Sensor Test > PBE |oveut High tnput Hetew som44 Loh |Fvel Rall Pressure Sensor Greut yyuroy ristory @ . MAP/Rarometic PressureGroul |Perman In—use Monitor > Per0E Isigh inout nt 7 |tubo/Super Gharger Boost |Perman 29227 |sensorflireut Low ent @ Component Test > papya Iitake Ar Temperature Sensor2. Perman Creuthigh ent Intemal Gontrol Module Software |Perman— @© Read ECU Information > ons 3.2 Clear Trouble Code Clearthe trouble code retrieved from the vehicle system module. As shown in the figure below, please record and save the trouble code read before clearing the trouble code forlater viewing and comparison. After the trouble code is cleared, the function of reading the trouble code is re—executed to verify whether the trouble code has been cleared.

-FCQQ FCAR FOBD User Manual of Oil Maintenance Tool § Clear Trouble Code @ Read Trouble Code > e Clear Trouble Code > @ Read Data Stream > @ Freeze Frame Data > O2 Sensor Test > ’ Trouble code cleared! @ In—use Monitor > Component Test > Read ECU Information > o 3.3 Read Data Stream Read and display the real—time operating parameters of the engine system. Click the view icon [ 1 on the left to view the real—time operation of the data stream. Click [] to close the display, as shown in Figure 3.3—1:

.FCOQ FCAR FOBD User Manual of Oi| Maintenance Tool Read Data Stream Read Trouble Code > Name (emomecnd x; Engine Coolant Temperature 40| C Clear Trouble Code > x; short Term Fuel Timganka o x x; Lang Term fuelTrim—Bank 1 o x Read Data Stream > x; FuelRallPressure(gauge) kea Manifold Absolute Pressure kea Freeze Frame Data > Engine speed 02 Sensor Test > Vehicle Speed Sensor lgntion Timing Advance(C.1) In—use Monitor > Intake Al Temperature Mass Ai Flow Sensor Component Test > Absolute Throtle Postion Read ECU Information > Figure 3.3—1 Read Data Stream Top:set the top ofthe selected parameteritems for easy viewing. Graph:View the data flow changes in waveform mode with the selected parameteritems, as shown in Figure 3.3—2: Save:Save the selected parameteritem in the data stream graph mode, which can be viewed in [Data Playback].

FCAR FOBD User Manual of Oil Maintenance Tool reewie IEcoam Read Data Stream Read Trouble Code Nome Vaive ut x Ergeecostn‘Terpeanee 40 c Clear Trouble Code x stotemrutimauis x lorg Temfeltetoaa x) rutairesmanGge X) Mantat Arcinese Freeze Frame Data 4 trgnessend 02 Sensor Test 4 vevtespenttensr 4 intontce * Rmreerun In—use Montor x mate nrerpentee 4 MsmArrnSeer Component Test 4 Anckeehorterostin Read ECU Information > Figure 3.3—2 Data Stream Graph 3.4 Freeze Frame Data Frozen frames refer to some of the most important parameters of vehicles and engines at the moment of the first failure. It is like a "snapshot" of the fault site. This information helps to explore the causes of the fault and is of great value for maintenance. The frozen frame interface is shown in Figure 3.4—1: rornenn a Faai amicien < Freeze Frame Data Read Trouble Code > IFre e frame DTC Clear Trouble Code > [Fuel system status [ vehicte Speed ul Read Data Stream > i load Value 27% Freeze Frame Data > ’ |Engine Cooant an‘c emperature j 02 SensorTest > Ié:a‘k\‘m m Fuel Trim: 0% > jLong Term Fuel Trim— go Component Test > | ;/amr»::k"" A 30 kPa Read ECU Information > [Engine speed 882 rom 10

.FCOQ FCAR FOBD User Manual of Oi| Maintenance Tool 3.5 02 Sensor Test OBDII regulations require vehicle monitors and tests on oxygen sensors to determine issues related to fuel efficiency and vehicle emissions. These tests are not on—demand tests. When the engine operating conditions are within the specified limits, they are automatically completed. These test results are stored in the driving computer. The oxygen sensortest function allows you to retrieve and view the test results of the oxygen sensor for the latest test from the driving computer. Vehicles using local area network CAN BUS for communication are not supported. Refer to the on—line system monitoring section for the test results of oxygen sensors for CAN BUS equipment vehicles. oz : m oc Peecicomcss s Test result Read Trouble Code on es Clear Trouble Code rarracecco Eemioerer Read Data Stream Lean to ich sensor switch tme (calcuated) Freeze Frame Data C Time batween sensor transtions (calcuated) Inuse Monitor Component Test Read ECU Information > 3.6 In—use Monitor On—line monitortesting function is used to monitor and access the operation of special components and systems, such as fire monitoring. The OEM is responsible for assigning a "customized test ID" to each monitored system. Each test result needs to be retained until the next updated test result, even if it is turned off multiple times. It will not be deleted. Different MIDs 11

'FCQQ FCAR FOBD User Manual of 0i | Maintenance Tool Indicates different diagnostic monitoring objects. A test object may have multiple test results, which are distinguished by different TIDs. Each test result contains three aspects of information: minimum value, maximum value and test value. Therefore, the fault can be clearly judged by the test results. OBD Teatocy s esieet Read Trouble Code ces Ciea: Toutle Code ces @ Read Data Stream en 02 Sensor Heater B24 Freeze Frame Data EVAP Montor(0040) noos MaxValue 24.00°C Wol icsc Ms—Fire Cy4 Data muse Mn 02 Sensor Heater B152 no :22 [©) component test TesValue FALSe Read ECU Information > 3.7 Component Test The function of componenttest is to enable externaltesting devices to control the work of OBD systems, testing or components. The information displayed includes the status of the system and the results of the test. 12

-FCQQ FCAR FOBD User Manual of Oil Maintenance Tool mro oore 3 pore Component Test s Test result Read Trouble Code ty Clear Trouble Code Read Data Stream Freeze Frame Data 02 Sensor Test Test compltea In—use Monitor Read ECU Information 3.8 ECU information Read and display vehicle information retrieved from vehicle ECU, such as Vehicle ID, Calibration ID, Calibration Verification, In—use Performance Tracing, ECU Name, In—use Performance Tracking, etc. as shown in figure: ts omeoect omm ECU information e ECU information Vehicle ID (VIN) LYVDF40AXHB233420 13

.mQQ FCAR FOBD User Manual of Oil Maintenance Tool 4. Service reset This function is mainly used for automobile maintenance, reset maintenance mileage and maintenance time cycle (some manual operation can also be used), most of the vehicles are installed in the instrument kilometers (such as setting 5000 kilometers maintenance) memory, when the mileage reached the data of the memory, immediately display maintenance (maintenance tips set by the automobile manufacturer), this prompt owner. If the engine life is guaranteed, the owner should be reminded to replace the oil in time. After replacing the oil, the instrument memory must be returned to zero. > How to do service reset 1) Choose [SERVICE RESET] to enter the model selection interface and select [CHERY], as shownin figure: SERVICE RESET us Manual reset GEELY Automatic reset GREATWALL GM CHRYSLER 14

.mQQ FCAR FOBD User Manual of Oil Maintenance Tool 2) Service reset usually has two ways: manual and automatic. Manual reset:— manual reset by following the screen prompt Automatic reset: automatic reset by software a. Select manual reset, further select the model, select [B11—Easta], the interface as shown in the figure, according to the screen prompt ti manual reset. Eoen) Ec SERVICE RESET Manual reset CHERY > Manual reset uisso se Assembly ACTECO models, engine service amene indicator light will be lt once every 5000 km Steps for erasing: A13—FY2(sedan) 1. Tum on the ignition switch, press the adjustment button for instrument to make the meter show instntancous pmpCnerecd) fuel consumption state, and turn off the ignition switch 2. Press the adjustment button,turn on bikairey the ignition switch, as well as press and hold for more than 3 seconds, and then releaseadjustment button, services will be automatically cleared. S12A1 M11—A3(sedan) Note: 1) The ignition switch is on, don‘t drive, because the data is changing when you are driving, so you can‘t drive when the service is resetting. 2) Operate every step according to the product prompt, don‘t make mistakes. It‘s better to quit the software after 5—10 seconds when the instrument display is completed, first quit the software, then turn off the ignition switch. After 10 seconds, turn on the ignition switch to see if the service reset is successful. 15

«FCaMN FCAR FOBD User Manual of Oil Maintenance Tool 3) If it is still showing maintenance after the service is reset, it is necessary to see if the oil is replaced and the maintenance mileage is the same, especially for Volkswagen Audi. 4) If you can‘t do it for the first time, you‘d betterdo it for the second time in 30 minutes, so that the data can be easily received, especially for Mercedes—Benz. 5) 5. If the above operations are correct but still unsuccessful, upgrade the software to the latest version and then test it. 5.HUD Support HUD mirror mode, you can project the screen of the mobile phone on the front windshield, you can see the vehicle status information without looking down. (The gantry is an optional accessory) 6.DTC Searching Enterthe fault code to be queried, and click [Confirm] to query the fault code 16

.FCQQ FCAR FOBD User Manual of Oil Maintenance Tool content, as shown in the figure. Please enter the code: poosd] | Content: POD5O HO2S Heater Control Circuit (Bank 2 Sensor 1) Confirm 7.Settings System settings can be set for language, unit, view FOBD information and data playback and software upgrades, etc. 7.1 Language setting Users select language versions according to their needs. 17

.FCOQ FCAR FOBD User Manual of Oil Maintenance Tool [English . , Spanish Unit setting ISpanist [Russian FOBD information Upgrade Data playback 7.2 Unit setting The unit of fuel consumption,temperature and speed can be selected and set. SETTINGS Language setting [ Unit of fuel consumption mee ~ — — [ Unit of temperature E> Unit setting [ Unit of speed k FOBD information Upgrade Data playback 18

.FCOQ FCAR FOBD User Manual of 0i | Maintenance Tool 7.3 FOBD information View software, hardware, firmware and other product version information. FOBD informatio 180—15765—118it Language setting 1 OBD protocol type s00K § Chinese/English/ Unit setting ISupported langue0® sponigh/Russian 1Software version oe1105v3.0 FOBD information [ Hardware version 8344 v2.0 @ Upgrade [ Firmware version e344 va.0 Data playback 7.4 Upgrade firmware In the networked environment, open [Upgrade firmware] and click [Upgrade] to update the firmware version of the product. 19

«FCaRn FCAR FOBD User Manual of Oil Maintenance Tool Nocad + Noce SETTINGS < Upgrade firmware Language setting > [ Current FOBD version B3ad v3.0 Unit setting > I New FOBD version Ved @00 FOBD information > Upgrade > Data playback > ’ Upgrade o [ 7.5 Data playback View saved data stream graph. m SETTINGS Data playback Language setting Please select itemto playback |zore—120s 150504 Unit setting |2ore—120s 1507.a0 FOBD information |20rea20s 150748 Uparade Izote—420s 150750 Jzorea2410 112255 peso o 20

«FCaMN FCAR FOBD User Manual of Oil Maintenance Tool FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occurin a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —— Reorient orrelocate the receiving antenna. —— Increase the separation between the equipment and receiver. —— Connect the equipmentinto an outlet on a circuit different from that to which the receiveris connected. —— Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. 21

'FCOQ FCAR FOBD User Manual of Oil Maintenance Tool Warranty clause Respected FCAR users, you are welcome to choose FCAR series products. In order to make better use of this product, we recommend that you maintain your product and follow the instructions of the user‘s instructions every time you use it. If your use meets this requirement, the products you own will provide you with more long—term high—quality services. 1. In accordance with the following terms and conditions, if the product has defects in material or process, Shenzhen FCAR Science and Technology Co Ltd. (hereinafter referred to as "FCAR Technology") will provide product warranty services. 2. The use of this product needs to be matched with FCAR flat panel diagnostic instrument. After purchase, please provide the serial number of the corresponding flat panel diagnostic instrument to the corresponding distributor or salesperson for the opening of the use rights and subsequent program updates. 3. Your products must be purchased through the product distributor authorized by FCAR Technology, and through abnormal channels, the buyer should bearthe cost of product maintenance services. 4. Products as follows: The wearable items such as product instructions, inner and outer packing boxes, promotional gifts and so on do not fall within the scope of warranty. 5. Products from the date of purchase (based on the valid purchase certificate and the valid warranty card of the product), if the product has a performance failure caused by non—artificial damage, the host can enjoy free warranty service within one year. 6. Under any of the following circumstances, your product will not be able to enjoy free warranty service: 1) Faults, defects or defects caused by the quality of non—FCAR technology products: including improper operation, impact, drop, self—assembly, inappropriate connection of parts, improper transportation or storage of products, pressure loss caused by infiltration ofliquids or food, etc.; 22

«FCaMN FCAR FOBD User Manual of Oil Maintenance Tool 2) Natural wear and tear of products: including but not limited to shell, fittings, etc. 3) Product mainframe serial number and warranty card product serial number do not match, product quality inspection label or bar code is removed, altered or damaged; 4) Disassembly, repair and modification without the approval of FCAR Technology. 7. The following measures can be taken if quality problems or malfunctions occurduring the warranty period: 1) After connecting the oscilloscope with the tablet host by USB cable, check whether the LED working indicator beside channel CH1 changes from a red light to a green light. If the red light keeps flashing, it means that the plate is not connected and the oscilloscope can not be recognized, please disconnect the connection and reconfirm. 2) You can dial the FCAR customerservice hotline (400—0755—007) to get the correct service information.; 3) After obtaining an effective reply from the company, you should send the product to the company‘s designated address (see the detailed address on FCAR official website) for repair and maintenance, so as to avoid the timely repair and maintenance of your product and the loss of the items sent. 8. In the course of warranty service, you will bear the costs related to the product before it is delivered to or sent to the designated location of FCAR Technology, including the cost of packaging, transportation, transportation, insurance and so on. 23

'FCQQ FCAR FOBD User Manual of Oil Maintenance Tool 9. The free warranty service you enjoy under this warranty is the only measure for the product to be damaged due to defects during the warranty period. FCAR Technology is not liable for any direct or indirect losses. 10. All warranty information, product function and specification changes will be published on the latest publicity materials and website of FCAR Technology without prior notice. 24

Shenzhen Fcar Technology Co., Ltd.

Certification This product has been strictly inspected as qualified products and met the company standards. Product name Product serial number Date of production Inspector Warranty card Product name Product serial number Purchase date Company name: User address: Contact person: Contact number:


Document Created: 2019-02-21 01:21:17
Document Modified: 2019-02-21 01:21:17
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC