User Manual

FCC ID: 2AJAAAUSNDBR20BLK

Users Manual

Download: PDF
FCCID_4156964

Streaming Soundbar
Active Streaming Soundbar with Optional Subwoofer
AU-SNBR-2.0-BLK
AU-SNBR-SUB-BLK


Table of Contents
Introduction...................................................................................................................................................................................................8
New Dealers - What to know .................................................................................................................................................................8
Important Tools and Resources .............................................................................................................................................................8
  Tools..............................................................................................................................................................................................................8
  Contents .....................................................................................................................................................................................................8
    Soundbar ................................................................................................................................................................................................8
    Subwoofer .............................................................................................................................................................................................8
Get to Know Autonomic ...........................................................................................................................................................................8
  Autonomic Capabilities ........................................................................................................................................................................8
    Streaming Services .............................................................................................................................................................................9
  Features ......................................................................................................................................................................................................9
    Sound Bar (Front)................................................................................................................................................................................9
    Soundbar (Rear)...................................................................................................................................................................................10
    Subwoofer .............................................................................................................................................................................................10
    Remote ....................................................................................................................................................................................................11
Install ................................................................................................................................................................................................................12
  Soundbar Placement..............................................................................................................................................................................12
  Installing On or In a Cabinet ...............................................................................................................................................................12
  Mounting on a Wall ................................................................................................................................................................................12
  Attaching the Wall Bracket .................................................................................................................................................................12
  Installing on a Flat Panel Mount ........................................................................................................................................................12
  Subwoofer Placement ...........................................................................................................................................................................12
Connect ...........................................................................................................................................................................................................13
  Bluetooth Pairing ....................................................................................................................................................................................14
  Sub to Soundbar Pairing .......................................................................................................................................................................14
  Subwoofer Level ......................................................................................................................................................................................14
  EQ ..................................................................................................................................................................................................................14
Programming and Setup ..........................................................................................................................................................................14
  Programming the Remote ...................................................................................................................................................................14
  Remote Codes ..........................................................................................................................................................................................14
  Claim Device on OvrC ...........................................................................................................................................................................15
  Discover and Update Soundbar Streaming Feature .................................................................................................................15
  Connect Devices......................................................................................................................................................................................15
  Discover and Update Devices ............................................................................................................................................................15
  Discover Devices and Play Music .....................................................................................................................................................15
  Add Services ..............................................................................................................................................................................................16
  Name Zones ..............................................................................................................................................................................................16
  TuneBridge™ .............................................................................................................................................................................................16
Control System Integration.....................................................................................................................................................................16
Warranty.........................................................................................................................................................................................................17
Contacting Technical Support ................................................................................................................................................................17
Specifications ................................................................................................................................................................................................18


                   The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user
                   to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of
                   sufficient magnitude to constitute a risk of electrical shock to persons.
                   The exclamation point, within an equilateral triangle, is intended to alert the user to the presence

         !         of important operating and maintenance (servicing) instructions in the literature accompanying the
                   product.


                                                         CAUTION
                                                    Risk of Electrical Shock!
                                                        DO NOT OPEN!

                                   ATTENTION ! RISQUE DE CHOC ! ÉLECTRIQUE PAS OUVRIR !
                                                                                       !
1.    READ these instructions.                                        20. Correct Disposal of this product. This marking indicates
2.    KEEP these instructions.                                            that this product should not be disposed with other
3.    HEED all warnings.                                                  household wastes throughout the EU. To prevent
4.    FOLLOW all instructions.                                            possible harm to the environment or human health
5.    DO NOT use this apparatus near water.                               from uncontrolled waste disposal, recycle it responsibly
6.    CLEAN ONLY with dry cloth.                                          to promote the sustainable reuse of material resources.
7.    DO NOT block any ventilation openings. Install in                   To return your used device, please use the return and
      accordance with the manufacturer’s instructions.                    collection systems or contact the retailer where the
8.    DO NOT install near any heat sources such as radiators,             product was purchased. They can take this product for
      heat registers, stoves, or other apparatus (including               environmental safe recycling.
      amplifiers) that produce heat.                                  21. This equipment is a Class II or double insulated
9.    DO NOT defeat the safety purpose of the polarized or                electrical appliance. It has been designed in such a way
      grounding type plug. A polarized plug has two blades                that it does not require a safety connection to electrical
      with one wider than the other. A grounding type plug                earth. (for wireless subwoofer unit)
      has two blades and a third grounding prong. The wider
                                                                      WARNING: To reduce the risk of fire or electrical shock, do not
      blade or the third prong are provided for your safety. If
      the provided plug does not fit into your outlet, consult        expose this apparatus to rain or moisture.
      an electrician for replacement of the obsolete outlet.
                                                                      WARNING: No naked flame sources – such as candles – should
10.   PROTECT the power cord from being walked on or
      pinched, particularly at plugs, convenience receptacles,        be placed on the product.
      and the point where they exit from the apparatus.
11.   ONLY USE attachments/accessories specified by the               THIS PRODUCT CONTAINS A LITHIUM COIN CELL
      manufacturer.                                                   BATTERY. IF MISUSED OR ABUSED THIS CAN RESULT IN:
12.           USE ONLY with the cart, stand, tripod, bracket,
              or table specified by the manufacturer, or sold         • Smoke or gas hazard • Heat hazard • Fire hazard •
              with the apparatus. When a cart is used, use            Explosion hazard
      caution when moving the cart/apparatus combination
      to avoid injury from tip-over.                                  WARNING: Do not place batteries in mouth or ingest.
13.   UNPLUG this apparatus during lightning storms or
      when unused for long periods of time.                           Chemical burn hazard. Keep new and used batteries out of
14.   REFER all servicing to qualified service personnel.             reach of children and pets. If swallowed, it can cause severe
      Servicing is required when the apparatus has been               internal burns in just 2 hours and can lead to death.
      damaged in any way, such as power-supply cord or
      plug is damaged, liquid has been spilled or objects             If you think batteries might have been swallowed or
      have fallen into the apparatus, the apparatus has been          placed inside any part of the body, seek immediate medical
      exposed to rain or moisture, does not operate normally,         attention.
      or has been dropped.
15.   To reduce the risk of fire or electric shock, do not            WARNING: If battery compartment does not close securely,
      expose this apparatus to rain or moisture. The
                                                                      stop using the product and keep it away from children and
      apparatus shall not be exposed to dripping or splashing
      and that objects filled with liquids, such as vases, shall      pets.
      not be placed on apparatus.
                                                                      WARNING: Do not handle leaking or damaged Lithium
16.   To completely disconnect this apparatus from the AC
      mains, disconnect the power supply cord plug from the           batteries.
      AC receptacle.
                                                                      WARNING: Risk of leakage. Only use the specified type of
17.   The mains plug/appliance coupler is used as disconnect
      device, the disconnect device shall remain readily              batteries. Never mix new and used batteries. Observe
      operable.                                                       correct polarity. Remove batteries from products that are
18.   DO NOT overload wall outlets or extension cords                 not in use for extended periods of time. Store batteries in a
      beyond their rated capacity as this can cause electric          dry place.
      shock or fire.
19.   No naked flame sources, such as lighted candles, should         WARNING: Batteries (battery pack or batteries installed) shall
      be placed on the apparatus.
                                                                4


not be exposed to excessive heat such as sunshine, fire or the                      This appliance is labeled in accordance with European
like.                                                                               Directive 2002/96/EC concerning waste of electrical
                                                                                    and electronic equipment (WEEE). This label indicates
WARNING: Danger of explosion if battery is incorrectly replaced.                    that this product should not be disposed of with
Replace only with the same or equivalent type.                            household waste. It should be deposited at an appropriate
                                                                          facility to enable recovery and recycling.
WARNING: Do not recharge non-rechargeable batteries.

                                                                          Federal Communication Commission Interference Statement
WARNING: Avoid exposure to extreme heat or cold. Please
dispose of any used batteries properly, following any local               This device complies with Part 15 of the FCC Rules. Operation
regulations. Do not incinerate.                                           is subject to the following two conditions: (1) This device may
                                                                          not cause harmful interference, and (2) this device must accept
WARNING: Do Not Open! Risk of Electrical Shock. Voltages in
                                                                          any interference received, including interference that may
this equipment are hazardous to life. No user-serviceable parts
                                                                          cause undesired operation.
inside. Refer all servicing to qualified service personnel.
                                                                          This equipment has been tested and found to comply with
Place the equipment near a main power supply outlet and make
                                                                          the limits for a Class B digital device, pursuant to Part 15
sure that you can easily access the power breaker switch.
                                                                          of the FCC Rules. These limits are designed to provide
WARNING: This product is intended to be operated ONLY from                reasonable protection against harmful interference in a
the AC Voltages listed on the back panel or included power                residential installation. This equipment generates, uses and
supply of the product. Operation from other voltages other                can radiate radio frequency energy and, if not installed and
than those indicated may cause irreversible damage to the                 used in accordance with the instructions, may cause harmful
product and void the products warranty. The use of AC Plug                interference to radio communications. However, there is
Adapters is cautioned because it can allow the product to be              no guarantee that interference will not occur in a particular
plugged into voltages in which the product was not designed               installation. If this equipment does cause harmful interference
to operate. If the product is equipped with a detachable power            to radio or television reception, which can be determined by
cord, use only the type provided with your product or by your             turning the equipment off and on, the user is encouraged to try
local distributor and/or retailer. If you are unsure of the correct       to correct the interference by one of the following measures:
operational voltage, please contact your local distributor and/
                                                                          Reorient or relocate the receiving antenna.
or retailer.
                                                                          Increase the separation between the equipment and receiver.
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment                 Connect the equipment into an outlet on a circuit different
should be installed and operated with minimum distance 20cm               from that to which the receiver is connected.
between the radiator & your body.
                                                                          Consult the dealer or an experienced radio/TV technician for help.
EU COMPLIANCE INFORMATION
                                                                          Approved under the verification provision of FCC Part 15 as a
                                                                          Class B Digital Device.
Eligible to bear the CE mark; Conforms to European Union
Low Voltage Directive 2006/95/EC; European Union EMC                      Caution: Changes or modifications not expressly approved by
Directive 2004/108/EC; European Union Restriction of                      the manufacturer could void the user’s authority to operate
Hazardous Substances Recast (RoHS2) Directive 2011/65/                    this device.
EC; European Union WEEE Directive 2002/96/EC; European
                                                                          Caution: To comply with the limits of the Class B digital device,
Union Eco-Design Directive 2009/125/EC; European Union
                                                                          pursuant to Part 15 of the FCC Rules, this device is to comply
registration, Evaluation, Authorization and Restriction of
                                                                          with Class B limits. All peripherals must be shielded and
Chemicals (REACH) Directive
                                                                          grounded. Operation with non-certified peripherals or non-
2006/121/EC; European Union Radio and Telecommunications
                                                                          shielded cables my result in interference to radio or reception.
Terminal Equipment (R&TTE) Directive 1999/5/EC.
                                                                          Radiation Exposure Statement:
This product contains batteries that are covered under the
2006/66/EC European Directive, which cannot be disposed of                This equipment complies with FCC radiation exposure limits
with normal household waste. Please follow local regulations.             set forth for an uncontrolled environment. This equipment
                                                                          should be installed and operated with minimum distance 20cm
You may obtain a free copy of the Declaration of Conformity by
                                                                          between the radiator & your body.
contacting your dealer, distributor or worldwide headquarters.
                                                                          Note: The country code selection is for non-US model only and
WEEE NOTICE
                                                                          is not available to all US model. Per FCC regulation, all WiFi
Note: This mark applies only to countries within the European             product marketed in US must fixed to US operation channels
Union (EU) and Norway.                                                    only.
                                                                      5


This Class B digital apparatus complies with Canadian ICES-                15. L’appareil : ne doit pas être exposé à un égouttement ou à
003. CAN ICES-3 (B)/NMB-3(B)                                                     des projections et aucun objet rempli de liquide, tel qu’un
                                                                                 vase, ne doit être placé sur .
WIRELESS TRANSMITTER COMPLIANCE INFORMATION                                16.   Pour débrancher complètement cet appareil du secteur,
                                                                                 débranchez la fiche du cordon d’alimentation de la prise
The term “IC:” before the radio certification number only                        secteur.
signifies that Industry Canada technical specifications were               17.   La fiche secteur du cordon d’alimentation doit rester
met.                                                                             immédiatement accessible.
                                                                           18.   Les piles ne doivent pas être exposées à une chaleur
This device complies with part 15 of the FCC Rules and the                       excessive telle que le soleil, un feu ou un équivalent
                                                                           19.   AL’éclair avec un symbole fléché se trouvant dans un
applicable Industry Canada license-exempt RSS standard(s).
                                                                                 triangle équilatéral est destiné à alerter l’utilisateur de
Operation is subject to the following two conditions: (1) this                   la présence d’un cc voltage dangereux » non isolé au sein
device may not cause harmful interference, and (2) this device                   du produit qui pourrait être d’une magnitude suffisante
must accept any interference, including interference that may                    pour constituer un risque de décharge électrique sur une
cause undesired operation of the device.                                         personne.
                                                                           20.   ÀkLe point d’exclamation se trouvant dans un triangle
This equipment complies with FCC and IC radiation exposure                       équilatéral destiné à alerter l’utilisateur de la présence
limits set forth for an uncontrolled environment. This                           de consignes de maintenance (entretien) et d’utilisation
equipment should be installed and operated with minimum                          importantes dans la documentation accompagnant
                                                                                 le produit. AVERTISSEMENT Pour réduire le risque
distance 20cm between the radiator and your body. This
                                                                                 d’incendie ou d’électrocution n’exposez pas cet appareil à
transmitter must not be co-located or operating in conjunction                   la pluie ou à l’humidité
with any other antenna or transmitter.
                                                                           Legal Notice
PRÉCAUTIONS DE SÉCURITÉ IMPORTANTES A LIRE EN
                                                                           Manufactured under license from Dolby Laboratories.
PREMIER !
1.    Lisez ces instructions.                                              Dolby, Dolby Audio, and the double-D symbol are trademarks
2.    Conservez ces instructions.                                          of Dolby Laboratories.
3.    Tenez compte de tous les avertissements.
4.    Suivez toutes les instructions.                                      Declaration of Conformity
5.    N’utilisez pas cet appareil près de l’eau.
                                                                           We declare under our sole responsibility that this product,
6.    Nettoyez uniquement avec un chiffon sec.
7.    Ne bouchez aucune ouverture de ventilation. Installez                to which this declaration relates, is in conformity with the
      conformément aux instructions du fabricant                           following standards:
8.    Ne l’installez pas à proximité d’une source de chaleur                • EN60065
      telle que des radiateurs, des bouches de chaleur,
                                                                            • EN55032
      des fourneaux ou d’autres appareils (y compris les
      amplificateurs) qui produisent de la chaleur.                         • EN55035
9.    Ne détournez pas l’objectif de sécurité de la fiche                   • EN61000-3-2
      polarisée ou de mise à la terre. Une fiche polarisée a                • EN61000-3-3
      deux lames dont l’une est plus large que l’autre. Une fiche
                                                                           Following the provisions of Low Voltage Directive 2006/95/
      avec mise à la terre a deux lames et une troisième broche
      de mise à la terre. La lame large ou la troisième broche             EC and EMC Directive 2004/108/EC, the EC regulation
      sont conçues pour votre sécurité. Si la fiche fournie ne             1275/2008 and its frame work Directive 2009/125/EC for
      s’insère pas correctement dans votre prise, consultez un             Energy-related Products (ErP).
      électricien pour le remplacement de la prise obsolète.
                                                                           TUV Certification
10.   Évitez de marcher sur le cordon secteur ou de le pincer,
      en particulier au niveau des fiches, des prises de courant           This product has been certified and conforms to UL60065 and
      et à son point de sortie de i                                        certified to CAN/SSA, IEC 60065.
11.   Utilisez seulement des compléments/accessoires
      spécifiés par le constructeur.
12.   Utilisez l’appareil seulement avec le chariot, pied, trépied,
      support ou table spécifié par le constructeur, ou vendu
      avec l’appareil.       Lors de l’utilisation d’un chariot,
      faites attention en déplaçant l’ensemble chariot/appareil
      afin d’éviter des blessures dues à un basculement.
13.   Débranchez cet appareil pendant les orages ou s’il est
      inutilisé pendant de ‘algues périodes.
14.   Confiez tous les travaux d’entretien à du personnel
      qualifié. Un entretien est nécessaire si l’appareil a été
      endommagé d’une façon quelconque, si le cordon ou la
      fiche d’alimentation sont endommagés, si du liquide a
      été renversé sur l’appareil ou si des objets sont tombés
      dedans, si l’appareil a été exposé à la pluie ou à l’humidité,
      s’il ne fonctionne pas normalement ou s’il est tombé.

                                                                       6


For North American Models                                                 Avis du Canada, Innovation, Sciences et
FCC interference statement
                                                                          Développement économique Canada (ISED)
This device complies with Part 15 of the FCC Rules. Operation             L’émetteur/récepteur exempt de licence contenu dans le
is subject to the following two conditions: (1) This device may           présent appareil est conforme aux CNR d’Innovation, Sciences
not cause harmful interference, and (2) this device must accept           et Développement économique Canada applicables aux
any interference received, including interference that may                appareils radio exempts de licence. L’exploitation est autorisée
cause undesired operation.                                                aux deux conditions suivantes :
IMPORTANT!                                                                (1) L’appareil ne doit pas produire de brouillage;
                                                                          (2) L’appareil doit accepter tout brouillage radioélectrique
Changes or modifications not expressly approved by the party              subi, même si le brouillage est susceptible d’en compromettre
responsible for compliance could void the user’s authority to             le fonctionnement.
operate the equipment.
NOTE: This equipment has been tested and found to comply
                                                                          Radio Frequency (RF) Exposure Information
with the limits for a Class B digital device, pursuant to Part            The radiated output power of the Wireless Device is below the
15 of the FCC Rules. These limits are designed to provide                 Innovation, Science and Economic Development Canada (ISED)
reasonable protection against harmful interference in a                   radio frequency exposure limits. The Wireless Device should
residential installation. This equipment generates, uses, and             be used in such a manner such that the potential for human
can radiate radio frequency energy and, if not installed and              contact during normal operation is minimized.
used in accordance with the instructions, may cause harmful                This device has also been evaluated and shown compliant with
interference to radio communications. However, there is                   the ISED RF Exposure limits under mobile exposure conditions.
no guarantee that interference will not occur in a particular             (antennas are greater than 20cm from a person's body).
installation. If this equipment does cause harmful interference           Informations concernant l'exposition aux
to radio or television reception, which can be determined by              fréquences radio (RF)
turning the equipment off and on, the user is encouraged to try
                                                                          La puissance de sortie rayonnée du dispositif sans fil est
to correct the interference by one of the following measures:
                                                                          inférieure aux limites d'exposition aux radiofréquences
 • Reorient or relocate the receiving antenna.
                                                                          d'Innovation, Sciences et Développement économique
 • Increase the separation between the equipment and receiver.            Canada (ISED). Le dispositif sans fil doit être utilisé de manière
 • Connect the equipment into an outlet on a circuit different from       à minimiser le potentiel de contact humain pendant le
   that to which the receiver is connected.
                                                                          fonctionnement normal.
 • Consult the dealer or an experienced radio / TV technician for         Cet appareil a également été évalué et déclaré conforme aux
   help.
                                                                          limites d'exposition RF ISED dans des conditions d'exposition
For Canadian Models                                                       mobile. (les antennes sont à plus de 20 cm du corps d'une
NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES WITH                        personne).
CANADIAN ICES-003.                                                        A Note About Recycling
For models having a power cord with a polarized plug:
                                                                          This product’s packaging materials are recyclable and can be
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
                                                                          reused. Please dispose of any materials in accordance with the
BLADE OF PLUG TO WIDE SLOT FULLY INSERT.
                                                                          local recycling regulations.
Modèle pour les Canadien                                                                        When discarding the unit, comply with local
REMARGUE: CET APPAPEIL NUMÉRIQUE DE LA CLASSE B                                                 rules or regulations. Batteries should never
EST CONFORME À LA NORME NMB-003 DU CANADA.                                                      be thrown away or incinerated but
Sur les modèles dont la fiche est polarisée:                                                    disposed of in accordance with the local
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES,                                                   regulations concerning battery disposal.
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS                                               This product and the supplied accessories
LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER                                                  constitute the applicable product according
JUSQU’AU FOND.                                                                                  to the WEEE directive.
Canada, Innovation, Science and Economic
Development Canada (ISED) Notices
This device contains licence-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the device.



                                                                      7


Introduction

New Dealers - What to know
Thank you for purchasing the Autonomic Streaming Soundbar! We strongly recommend performing setup and configuration
prior to installing at the customer site. This is especially important if this is your first time working with the product. Please retain
this manual for future reference.
The Autonomic product line offers state-of-the-art, high resolution audio solutions with the convenience of accessing all local
audio content and streaming Internet services within a single solution. This integrated streamer, amplifier and speaker design
combines a single-stream player with a 2.0/2.1 active soundbar, providing exceptional audio flexibility. This soundbar can act as
a standalone solution, or seamlessly integrate into any existing Autonomic ecosystem as an additional stream or zone. Its also
perfect for an entry level Autonomic system where premium, high resolution audio is desired.
Like all Autonomic solutions, this soundbar has multiple control options – including integration with today’s leading control
systems or standalone control via the all-new TuneBridge app.
The soundbar has one video output that can be configured to display Now Playing information for any of the audio inputs.

Important Tools and Resources

Resources
 • Setup- setup.tunebridge.com
 • OvrC – http://www.ovrc.com/
 • DealerZone – https://dealerzone.autonomic-controls.com/
 • Knowledge Base – www.autonomic-controls.com/kb
 • Product page - https://www.snapav.com/shop/en/snapav/autonomic

Tools
 • Laptop or tablet connected to the internet and local network
 • HDMI monitor optional
 • Network cables
 • Voltmeter
 • Drill and Philips screwdriver

Contents
Soundbar

  • 1x Soundbar                                • 1x RCA cable                                • 1x Wall bracket
  • 1x Soundbar Power cord                     • 1x Toslink cable                            • 4x Wall Anchors
  • 1x Remote


Subwoofer

  • 1x Subwoofer
  • 1x Subwoofer Power Cord


Get to Know Autonomic
Autonomic Capabilities
 • Control of up to 32 discreet audio channels into as many as 96 zones using any combination of any Autonomic streamer, amplifier or
   soundbar.
 • Native play back of audiophile grade uncompressed, lossless 24-bit/192kHz audio
 • Synchronization and play back of multi-room audio from sources, both streaming and physical sources plugged into Autonomic
   amplifiers, using eAudioCast.
 • Physical sources plugged into the soundbar can be played back throughout the rest of the site using additional Autonomic amplifiers
 • Browse music and control playback using any iOS or Android device, web browser, or control system including Crestron, AMX,
   Control4, RTI, URC, Savant, ELAN, and more.
                                                                    8


 • Use the soundbars HDMI output to display Now Playing Information for streaming audio.
 • Access an online library of tens of thousands of albums with Amazon Music, Napster®, Spotify or Slacker Premium.
 • Access SiriusXM and SiriusXM Music for Business online without installing an antenna.
 • Create custom radio stations via Pandora or Slacker Radio.
 • Browse thousands of AM and FM radio broadcasts around the world using TuneIn Internet Radio service.
 • Synchronize with Apple iCloud. (Requires the Media Sync and iTunes software to be installed). This synchronization allows access to
   media anywhere in the world using any iOS or Android device or web browser.
 • Play content from any iOS device through an audio system using the built-in Airplay receiver

Streaming Services
NOTE: This product incorporates Spotify software which is subject to 3rd party licenses found here:
https://developer.spotify.com/esdk-third-party-licenses/
The Soundbar provides access to several online music services via an Internet connection, such as PANDORA®, SiriusXM, Spotify,
Slacker, Napster and TuneIn.
Autonomic is constantly working to develop partnerships with content service providers to bring even more of the best Internet-
delivered media through future firmware updates.




Features
Sound Bar (Front)
                                                  A                             B    C     D     E




A.   Source LED                                                        B.   Input Toggle
     Blue: Bluetooth input                                                  Switch between digital, analog, bluetooth, and Autonomic
                                                                            Streaming inputs. Press and hold to disable the front LED panel.
     Red: Standby                                                      C.   Volume Up
         Blink Once: Volume level at min/max                                Increase volume level
         Blinks Continuously: Muted                                    D.   Volume Down
     Green: Toslink optical input                                           Decrease volume level
     Yellow: RCA Line Level Input                                      E.   Mute
     Purple:                                                                No volume
         Blink Once: EQ off;
         Blinks Twice: EQ on
     Magenta: Streaming Content
     White:
         Blink Once: Volume level changed
         Blinks Twice: Dolby Digital source being decoded




                                                                   9


Soundbar (Rear)
                        A              B        C              D      E                   F                G                 H               I           J


                                                                              ANALOG IN       DIGITAL IN       DC IN
                                                                                 2                1                              IR IN
                            HDMI       USB          ETHERNET
                            OUT                                           R

                                                                                                           24V 2.5A
                                                                                                 COAX         60W

                                                                          L




A.   HDMI Out                                                                  F.   TOSLINK Optical Input
     Autonomic on-screen display for Now Playing content                            Digital optical input. Dolby Digital formats will be decoded
B.   USB Port                                                                  G.   Digital COAX Input
     To connect an external hard drive for additional storage                       Digital COAX input. Dolby Digital formats will be decoded
C.   Ethernet Port                                                             H.   DC IN Power Port
     For network connection                                                         Power cord connection
D.   Factory reset                                                             I.   IR IN Port
     To reset the system and power cycle the soundbar                               For soundbar control
E.   Analog Audio Inputs                                                       J.   Subwoofer Pairing Pinhole
     Left and right RCA stereo input                                                To initiate pairing between the soundbar and subwoofer




Subwoofer
A.   Status Led                            D.   Master Power Switch
     Red: Standby                               ON/OFF switch
     Blue: On                              E.   AC Power In
B.   Volume Knob                                Power cord connection                                                                        AU-SNDBR-SUB-BLK
                                                                                                                                                                      ,

     Adjust master volume                                                                 A                                              L




C.   Pairing Pinhole
                                                                                          B
     To initiate pairing between the                                                                                                CE
     soundbar and subwoofer
                                                                                                                                         -            This device complies with Part 15 of the FCC Rules.
                                                                                                                                                      Operation is subject to the following two conditions.


                                                                                          C                            FCCID:
                                                                                                                       IC:
                                                                                                                                                      (1) this device may not cause harmful interference, and
                                                                                                                                                      (2) this device must accept any interference received,
                                                                                                                                                      including interference that may cause undesired operation.

                                                                                                                                                      CAN ICES-3 (B)/NMB-3 (B)




                                                                                                                                                 AC 100-240V ~
                                                                                                                                                   50/60Hz
                                                                                                                                                     90W



                                                                                          D


                                                                                          E




                                                                              10


Remote

A.   Power Toggle: Toggles Power Mode          B.   EQ Toggle: Toggles Subwoofer between         A   B
     between On and Standby                         On and Off
     Power On: All subsystems powered on            Paired: Subwoofer is paired via wireless
     including amplifier. Soundbar is fully         sub module. EQ optimized for use with        C   D
     functional                                     subwoofer
                                                                                                 E
     Power Off: TuneBridge and Amplifier            Unpaired: Subwoofer absent or unpaired
     in standby mode (if applicable). All           via wireless sub module. EQ optimized        F
     other input is inactive.                       for use without subwoofer.
C.   Preset A                                  D.   Preset C
                                                                                                 G   I
     Short Press: Selects the TuneBridge            Short Press: Selects the TuneBridge input
     input of the Soundbar and recalls              of the Soundbar and recalls TuneBridge       H
     TuneBridge Preset A. If no TuneBridge          Preset C. If no TuneBridge Preset C has
     Preset A has been stored, short press          been stored, this short press is inactive.   J
     is inactive.
     Long Press: Stores the currently               Long Press: Stores the currently playing     K
     playing content as TuneBridge Preset           content as TuneBridge Preset C. If               M
     A. If TuneBridge input is not selected,        TuneBridge input is not selected, long       L
     long press is inactive.                        press is inactive.
E.   Preset B                                                                                    N   O
     Short Press: Selects the TuneBridge
     input of the Soundbar and recalls
     TuneBridge Preset B. If no TuneBridge                                                       P
     Preset B has been stored, this short
     press is inactive.
     Long Press: Stores the currently
     playing content as TuneBridge Preset
     B. If TuneBridge input is not selected,
     this long press is inactive.
F.   Navigation UP
G.   Skip Previous: Only active if currently
     selected input is TuneBridge
     Skips back to previous songs in
     the queue (first press skips to the
     beginning of the current song). Button
     is inactive if queue has no previous
     songs or if the streaming service does
     not support skipping backward.
H.   Play/Pause: Only active if currently      I.   Skip Next: Only active if currently
     selected input is TuneBridge                   selected input is TuneBridge
     Toggles between Play and Pause states          Skips forward to next song in the queue.
     of the current streaming content.              Button is inactive if queue contains no
     Button is inactive if the streaming            more songs or if the streaming service
     service does not support pause                 does not support skipping forward.
J.   Navigation Down
K.   Cycle Physical Input
     Cycles soundbar physical inputs
L.   TuneBridge Input                          M. Bluetooth Input
     Selects the TuneBridge streaming               Short Press: Selects the Bluetooth input
     input. Does not modify streaming               if paired to one. Enters pairing mode
     content.                                       and waits for connection request from a
                                                    Bluetooth source device if not paired
N.   Volume Down                               O.   Volume Up
     Short Press: Decreases volume level            Short Press: Increases volume level
     Long Press: Decreases volume level             Long Press: Decreases volume level
     until released
P.   Mute
     Initial press sets volume level to 0.
     Pressing again returns volume to
     previous set level.



                                                                       11


Install

Soundbar Placement
Placement should be below a flat screen TV on a cabinet top or shelf near a network connection for most applications. Other options for
placement include on-wall using the included bracket, or attached to a flat panel mount using the optional Strong mount bracket.

Installing On or In a Cabinet




                                         On Cabinet                               In Cabinet
Note: When placing the soundbar on a cabinet shelf, the front edge of the speaker should be flush with the front of the shelf.
Placing the speaker further back on the shelf will degrade the sound quality of the speaker.

Mounting on a Wall

Considerations for Wall Mounting
Installing the soundbar more than 3" from the screen may delay the audio from the video and provide a poor listening experience.
The soundbar should be as close to the TV as possible for best listening experience.

Attaching the Wall Bracket
1.   Mark the position of the bottom of the TV.
2.   Mark the position of the TV’s center point.
3.   Remove the TV from the mount if necessary.
4.   Locate wall studs using a stud finder (not included).
5.   Place the bracket on the wall with the flat side toward the wall and the notched center mark facing up. The Soundbar
     center mark should be located at the center point of the installed television.
6.   Position the bracket vertical center “V” groove 2-1/8" from the bottom of the TV. The Soundbar will hang flush with the
     bottom of the TV once installed.
7.   Level the bracket and attach it to the wall studs using the horizontal screwhole slots. Use all 4 screws and keep the bracket
     securely attached and flush with the wall.
Note: If wall studs cannot be used, wall mollies or anchors with the appropriate weight rating for the soundbar should be used.

8.   Clip the Soundbar onto the bracket, and center by adjusting left to right.

Installing on a Flat Panel Mount
The Autonomic Soundbar can be mounted directly to a Flat Panel Mount with the Strong™ SM-SBAR-BKT (available separately).
Using the Flat Panel mount bracket allows the Soundbar to move with the TV when mounted to articulating arm mounts. This
provides an optimal listening experience for these installations.

Subwoofer Placement
If using a subwoofer with the soundbar, placement can have an effect on performance. All rooms are different, but the strongest
output will likely occur if the subwoofer is placed in a corner of the room on the same wall as the soundbar. This is known as the
boundary effect and will emphasize certain bass frequencies while canceling others. Some listeners find this to be the best sounding
result, while others find it “boomy” or muddy. Experiment with available placement options and use the tuning instructions in the
FINE TUNE section of this manual.



                                                                 12


Connect
To use Autonomic's eAudioCast (distributing audio around the network) the soundbar must be hardwired into the Network.
eAudioCast can be used for playing back sources on other autonomic amplifiers on the soundbar or for distributing sources
plugged into the soundbar in the rest of a larger autonomic system. For cases where the soundbar is being used without the use of
eAudioCast, WiFi can be used.

Connecting all the wires and components
See below for a basic connection diagram.
NOTE: Plug everything in and connect all wires before powering up. It is recommended to attach a display when first powering up
the soundbar as the IP address will be on screen.
Once all necessary connections are made, supply power to the soundbar. The power button will illuminate.
Wait 2-3 minutes for the soundbar to completely boot up. If the soundbar is connected to a video display, wait until the Now
Playing screen shows on the display.

                                                    Single Stream 5-Zone System

                  KEY
                     Audio
                     LAN




                                                                                                 Display
                                  Mac or PC




                                                                                   Switch



                                                                                      Soundbar


                                                                                      Bedroom
                                           M·120e Digital Amplifier




                                                                      IR OUTPUTS




                                   Study    Basement Guest Room Patio




Use included RCA or Toslink cable to connect devices.
CAUTION: All connections must be done with the device turned off. Connect power last to ensure the device is off during all set
up and connections.
NOTE: Plug everything in and connect all wires before powering up. It is recommended to attach a display when first powering up
the soundbar as the IP address will be on screen.



                                                                       13


Bluetooth Pairing
1.   Use the soundbar remote or front panel control to select the bluetooth input.
2.   If the soundbar is paired to an existing device, the blue light will be solid. If blinking, it is ready for pairing.
3.   Access the bluetooth pairing menu on the device to be paired to the soundbar by pressing the bluetooth button.
4.   Select the Soundbar (AU-SNDBR)
5.   To re-enter pairing mode, disconnect the currently paired device.
NOTE: Changing inputs requires device reconnection.


Sub to Soundbar Pairing
1.   Press and hold down the subwoofer pairing button on the soundbar and wait for the LED on the front of the soundbar to
     blink.
2.   Release the soundbar pairing button once the LED blinks.
3.   Press and hold the pairing button on the Subwoofer.
4.   The subwoofer is paired with the soundbar once the LED turns blue on the subwoofer.
NOTE: There is also a feature where by pressing the EQ button on the remote It toggles the subwoofer on and off. When the
subwoofer is toggled off, the soundbar adjusts its EQ settings for optimal performance without the subwoofer.

Subwoofer Level
After making all connections and calibrating the speakers, set up the subwoofer using the following steps:
1.   Connect power to the subwoofer. The status LED will illuminate solid red when power is present and the subwoofer is on.
     LED will illuminate solid blue when soundbar is on.
2.   Set volume dial at 50%.
3.   Play a movie scene or music track and set the system volume to an average level. Listen to the bass level from the listening
     position.
4.   Adjust the subwoofer VOLUME control as desired.

EQ
The EQ is set to bring out the dialog to replicate a 3 channel setup with only two channels. When a subwoofer is present in a
system, pressing the EQ Toggle button turns the subwoofer on or off and optimizes the EQ accordingly. Toggling off the EQ
button unpairs the subwoofer and soundbar and adjusts the soundbar EQ for optimal bass performance without the sub. Toggling
it on pairs the two devices and adjusts the EQ for best sound performance with the sub. See page 11.

Programming and Setup

Programming the Remote
1.   Connect power to the soundbar, then press the power button.
2.   Press and hold MUTE on soundbar until the LED flashes yellow.
3.   Press the button on the soundbar that will be programmed once (MUTE, VOLUME UP, VOLUME DOWN). LED will now be
     solid yellow.
4.   Press the button to be learned on the TV remote (MUTE, VOLUME UP, VOLUME DOWN) slowly four times (look for the
     LED to flash before pressing again).
5.   LED will now blink green 6 times.
6.   Repeat for MUTE, VOLUME UP, VOLUME DOWN commands.

Remote Codes
Please visit the support tab of the product page on www.snapav.com for more information and available HEX codes.




                                                                    14


Claim Device on OvrC
To claim the device on OvrC:

1.     Connect to your customer's network.
2.     Go to www.OvrC.com.
3.     Log in to your account or create an account.
4.     Create the customer by clicking Add Customer and input the customer's information.
5.     Click +Device and enter the MAC Address and Serial Number for the device to claim the device.
6.     Claim all other devices on the network.

Connect Devices

Discover and Update Devices
1.     Go to setup.tunebridge.com. from a browser or mobile
       device that is connected to the same network. All local
       streamers will be discovered.
2.     Click on Config next to a streamer to open it’s UI.
3.     Without making any other changes, click on the Firmware
       Tab once the UI opens to update the firmware if an update
       is available.
4.     Repeat steps 1-3 for each streamer if more than one is in
       the system.

Play Music
1.     Go to setup.tunebridge.com. from a browser or mobile
       device that is connected to the same network. All local
       streamers will be discovered.
2.     Click Control next to any of the discovered streamers. The
       Mirage Web UI will load.
     • You may need to enable Flash.
3.     Turn on the zone you want to play content in.

       If using eSeries amps:

       • Select Zones, then click the power button next to the zone
         you want to turn on.

       If using non-eSeries or non-Autonomic amplifiers:

       • Click Zones, then select player A .

4.     Click Streaming.
5.     Scroll the services list down and select TuneIn Radio.
       (TuneIn is a free service that does not require any login).
6.     Select Local Radio.
7.     Click FM.
8.     Click one of the first stations in the list.
9.     Congratulations! Music should begin playing in the previously selected zone (or the first physical output if physically connected
       amp).




                                                                      15


Add Services
1.   Go to setup.tunebridge.com and click on the Config link
     next to your streamer.
2.   Go to the Content Tab.
3.   Scroll down to the Online Credentials section.
4.   Click the gear beside the service you want to add and
     select Add Account.
5.   Follow the prompts to login to your service account.
     Note: Ensure pop-ups are not blocked as some services
     require a pop-up window.

Name Zones
1.   Go to setup.tunebridge.com and click on the Config link
     next to your streamer.
2.   Go to the System Tab.
3.   If using eSeries amps:
 • Scroll down to the Amplifiers section. This section will list all
   discovered amps with the same system ID as your streamer
   (default system ID is 1).

 • Select the gear next to your amplifier and select Edit .

 • Under Zone Name, click the zone you want to change

 • Type the new name. You must press Enter for the changes to
   take effect.

 • Click Done.
4.   If using non-eSeries or non-Autonomic amplifiers:
 • Scroll down to the Streamers section.

 • Select the gear next to your streamer and select Edit .

 • Under Output Name, click the Player you want to change.

 • Type the new name. You must press Enter for the changes to
   take effect.
 • Repeat for other players.
For all other configuration details, view the user’s manual on the
product support tab at www.snapav.com.

TuneBridge™
Control support for iPhone, iPad and Android devices is
available by downloading the Tunebridge app from the Apple
App Store or Google Play store.




                                                                       16


Control System Integration
The Soundbar Media Soundbar is designed to work seamlessly in an automated home environment. Autonomic works closely
with all leading control system manufacturers to ensure the smoothest operation and access to all features of the Soundbar on
control system touch panels or automation applications. Autonomic has partnered with Crestron, AMX, Control4, URC, RTI,
Savant, Elan, Command Fusion, Bitwise Controls, and Key Digital to provide modules, UI templates and other tools needed for a
successful integration. Visit Snap AV product page for more information.




NOTE: Reference the eSeries manual for more in-depth instructions on setting up Autonomic Devices.

Warranty
2-Year Limited Warranty
This Autonomic product has a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all components found
to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have
been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated
service center with prior notification and an assigned return authorization number (RA).

Contacting Technical Support
866.838.5052
techsupport@snapav.com




                                                              17


Specifications                                                           AU-SNBR-2.0-BLK
                                                                         Deezer, iHeartRadio, Murfie, Napster, PANDORA® Internet Radio, SiriusXM
                                            Streaming Services
                                                                         Internet Radio, Slacker Radio, Spotify, TIDAL, TuneIn, AirPlay, Amazon Music

                                                                         .aif, .aifc, .aiff, .au, .cda, .flac, .m4a, .m4p, .mp2, .mp3, .mpa, .rmi, .snd, .wav, .wma,
High Resolution Output                      Audio Formats
                                                                         .wpl

As with the premium music servers           Internal Storage             16 GB Flash Memory; holds approximately 5,000 songs

in the lineup, the AU-SNBR-2.0-BLK          External Storage             Expandable via USB external hard drives or network shared storage
supports full High Resolution Audio         Inputs                       Analog RCA, Digital Coax, Digital TosLink, Bluetooth
(HRA) at 24bit/192kHz.                      Digital-to-Analog
                                                                         High-resolution 24bit/192kHz
All Solid State                             Conversion

                                            Supported Sample Rates       44.1/48/96/192 kHz at 16-bit or 24-bit resolution
All eSeries products are completely
                                            S/N Ratio                    96db, A weighted
solid state. Autonomic has eliminated
all moving parts from its entire lineup     Video Outputs for OSD        HDMI (Max Resolution of 1920 X 1080)

with solid state storage and re-                                         Mirage Media Sync for both Mac and Windows:
                                            Local Synchronization
                                                                         download from web-based configuration under Firmware tab
engineered passive cooling systems,
which translates to years of trouble        Control System Protocols     IP, 2-way documented API

free and silent performance, lower                                       AMX, Command Fusion, Control4, Crestron, Elan, KNX, Leviton, Lutron, ON
                                            Control                      Controls, RTI, Savant, URC, Windows/Mac, on-screen display (OSD), mobile
power consumption, and snappier
                                            Interfaces                   devices and computers, Mirage Media Controller for Apple iPad, iPhone/iPod
responsiveness.                                                          Touch, Android and Amazon Kindle

WiFi Support                                LAN Connection
                                                                         (1) 8-wire RJ45 with 2 LED indicators; 10/100/1000 Mbits/sec BaseT Ethernet
                                                                         port; green LED indicates link status; yellow LED indicates Ethernet activity
The AU-SNBR-2.0-BLK supports
                                            Wireless LAN                 802.11 a/b/g/n/ac; Dual-band 2.4 GHz/5GHz
both wired and WiFi connections for
                                            USB                          (1) USB 2.0
convenient placement.
                                            Tweeter                      (2) .75" Soft Dome

                                            Woofer                       (4) 3" Polypropylene

                                            Color                        Black High Gloss

                                            Power Handling (Peak)        250 W

                                            Grille Type                  Perforated Steel

                                            Frequency Response           35Hz-20KHz

                                            Input Power                  100−240V AC ~ 50/60Hz, 1.8A

                                                                         4.51" H x 43.9" W x 3.08" D/
                                            Finished Dimensions
                                                                         (w/wall bracket) 4.51" H x 43.9" W x 3.33" D

                                            Weight                       7.6 lbs

                                                                         AU-SNBR-SUB-BLK
                                            Subwoofer                    8" Polypropylene

                                            Subwoofer Adjustments        Volume, On/Off

                                            Weight (Soundbar)            7.6 lbs

                                            Input Power (Subwoofer)      100−240V AC ~ 50/60Hz, 90W

                                                                         9.88" W x 11.57" H x 12.96" D/
                                            Finished Dimensions
                                                                         (w/volume knob) 9.88" W x 11.57" H x 13.53" D

                                            Weight (Subwoofer)           21.2 lbs




Integrate any streaming service with your control system




                                                                    18



Document Created: 2019-01-30 16:12:42
Document Modified: 2019-01-30 16:12:42

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC