Test Report

FCC ID: 2AJ9T-TL400B

Test Report

Download: PDF
FCCID_3682010

Access to the World ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPARTC REQUIREMENT OF Fingerprint Lock MODEL No.: TL400B FCC ID: 2AJ9T-TL400B Trademark: N/A REPORT NO: ES171027979W02 ISSUE DATE: November 27, 2017 Prepared for ZKTECO CO., LTD. No.26, Pingshan 188 Industry zone, Tangxia Town, Dongguan City, Guangdong Province, China Prepared by EMTEK(SHENZHEN) CO., LTD. Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China TEL: 86-755-26954280 FAX: 86-755-26954282 TRF No：FCC 15C/A Page 1 of 17 Report No: ES171027979W02 Ver.1.0

VERIFICATION OF COMPLIANCE Applicant: ZKTECO CO., LTD. No.26, Pingshan 188 Industry zone, Tangxia Town, Dongguan City, Guangdong Province, China Manufacturer: ZKTECO CO., LTD. No.26, Pingshan 188 Industry zone, Tangxia Town, Dongguan City, Guangdong Province, China Product Name: Fingerprint Lock Model Number: TL400B Serial Number: N/A File Number: ES171027979W02 We hereby certify that: The above equipment was tested by EMTEK(SHENZHEN) CO., LTD.. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10 (2013) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.207&15.209. The test results of this report relate only to the tested sample identified in this report. Date of Test : October 27, 2017 to November 27, 2017 Prepared by : Sevin Li/Editor Reviewer : Joe Xia/Supervisor Approved & Authorized Signer : Lisa Wang/Manager

Access to the World Table of Contents 1. GENERAL INFORMATION .................................................................................................................... 4 1.1 PRODUCT DESCRIPTION ............................................................................................................................. 4 1.2 RELATED SUBMITTAL(S) / GRANT (S) .......................................................................................................... 4 1.3 TEST METHODOLOGY................................................................................................................................. 4 1.4 SPECIAL ACCESSORIES .............................................................................................................................. 4 1.5 EQUIPMENT MODIFICATIONS....................................................................................................................... 4 1.6 TEST FACILITY ........................................................................................................................................... 5 2. SYSTEM TEST CONFIGURATION ........................................................................................................ 6 2.1 EUT CONFIGURATION ................................................................................................................................ 6 2.2 EUT EXERCISE.......................................................................................................................................... 6 2.3 TEST PROCEDURE ..................................................................................................................................... 6 2.4 LIMITATION ................................................................................................................................................ 6 3. SUMMARY OF TEST RESULTS ............................................................................................................ 7 4. CONDUCTED EMISSION TEST ............................................................................................................. 8 4.1 APPLICABLE STANDARD .................................................................................................................................. 8 4.2 CONFORMANCE LIMIT ...................................................................................................................................... 8 4.3 TEST CONFIGURATION .................................................................................................................................... 8 4.4 TEST PROCEDURE .......................................................................................................................................... 8 4.5 MEASUREMENT EQUIPMENT USED: .................................................................................................................. 8 4.6 TEST RESULT ................................................................................................................................................. 9 5. RADIATED EMISSION TEST ............................................................................................................... 10 5.1 MEASUREMENT PROCEDURE .................................................................................................................... 10 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .............................................................................. 11 5.3 MEASUREMENT EQUIPMENT USED: ........................................................................................................... 11 5.4 MEASUREMENT RESULT .............................................................................................................................. 12 6. ANTENNA APPLICATION ................................................................................................................... 17 ANTENNA REQUIREMENT..................................................................................................................................... 17 RESULT .............................................................................................................................................................. 17 TRF No：FCC 15.247/A Page 3 of 17 Report No: ES171027986W02 Ver.1.0

Access to the World 1. GENERAL INFORMATION 1.1 Product Description Characteristics Description EUT Description Fingerprint Lock Model Number TL400B Device style RFID Modulation ASK Operating Frequency 125kHz Range Number of Channels 1 Antenna Type Coil Antenna Antenna Gain 0dBi Power supply DC 6V via 4*AA Batteries 1.2 Related Submittal(s) / Grant (s) This submittal(s) (test report) is intended for FCC ID: 2AJ9T-TL400B filing to comply with Section 15.207&15.209 of the FCC Part 15 Subpart C Rules. 1.3 Test Methodology Both conducted and radiated testing was performed according to the procedures in ANSI C63.10 (2013) and Radiated testing was performed at an antenna to EUT distance 3 meters. 1.4 Special Accessories Not available for this EUT intended for grant. 1.5 Equipment Modifications Not available for this EUT intended for grant. TRF No：FCC 15.247/A Page 4 of 17 Report No: ES171027986W02 Ver.1.0

Access to the World 1.6 Test Facility Site Description EMC Lab. : Accredited by CNAS, 2016.10.24 The certificate is valid until 2022.10.28 The Laboratory has been assessed and proved to be in compliance with CNAS-CL01: 2006(identical to ISO/IEC17025: 2005) The Certificate Registration Number is L2291 : Accredited by TUV Rheinland Shenzhen, 2010.5.25 The Laboratory has been assessed according to the requirements ISO/IEC 17025. : Accredited by FCC, August 03, 2017 Designation Number: CN1204 Test Firm Registration Number: 882943 : Accredited by Industry Canada, November 24, 2015 The Certificate Registration Number is 4480A-2 TRF No：FCC 15.247/A Page 5 of 17 Report No: ES171027986W02 Ver.1.0

Access to the World 2. System Test Configuration 2.1 EUT Configuration The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner which intends to maximize its emission characteristics in a continuous normal application. 2.2 EUT Exercise The Transmitter was operated in the normal operating mode. The TX frequency was fixed which was for the purpose of the measurements. 2.3 Test Procedure 2.3.1 Radiated Emissions The EUT is a placed on as turn table which is 0.8 m above ground plane. The turn table shall rotate 360 degrees to determine the position of maximum emission level. EUT is set 3m away from the receiving antenna which varied from 1m to 4m to find out the highest emission. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. In order to find out the max. emission, the relative positions of this hand-held transmitter(EUT) was rotated through three orthogonal axes according to the requirements in Section 13.1.4.1 of ANSI C63.10-2013. 2.4 Limitation (1) Radiated Emission FCC Part 15, Subpart C Section 15.209 limit of radiated emission for frequency below 1000GHz. The emissions from an intentional radiator shall not exceed the field strength level specified in the following table: Frequency Field strength Distance(m) Field strength at 3m (MHz) V/m dBV/m 0.009~0.490 2400/F(KHz) 300 See the remark 0.490~1.705 2400/F(KHz) 30 1.705~30.0 30 30 30-88 100 3 40 88-216 150 3 43.5 216-960 200 3 46 Above 960 500 3 54 Remark: 1. Emission level in dBuV/m=20 log (uV/m) 2. Measurement was performed at an antenna to the closed point of EUT distance of meters. 3. Distance extrapolation factor =40log(Specific distance/ test distance)( dB); Limit line=Specific limits(dBuV) + distance extrapolation factor. TRF No：FCC 15.247/A Page 6 of 17 Report No: ES171027986W02 Ver.1.0

Access to the World 3. Summary of Test Results FCC Rule Description Of Test Result 15.207 AC Power Conducted Emission N/ANote 15.209 Radiated Emission Pass Note: The EUT power supply is DC 6V via 4*AA batteries TRF No：FCC 15.247/A Page 7 of 17 Report No: ES171027986W02 Ver.1.0

Access to the World 4. CONDUCTED EMISSION TEST 4.1 Applicable Standard According to FCC Part 15.207(a) 4.2 Conformance Limit Conducted Emission Limit Frequency(MHz) Quasi-peak Average 0.15-0.5 66-56 56-46 0.5-5.0 56 46 5.0-30.0 60 50 Note: 1. The lower limit shall apply at the transition frequencies 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.3 Test Configuration Test according to clause 7.3 conducted emission test setup 4.4 Test Procedure The EUT was placed on a table which is 0.8m above ground plane. Maximum procedure was performed on the highest emissions to ensure EUT compliance. Repeat above procedures until all frequency measured were complete. 4.5 Measurement Equipment Used: EQUIPMENT MFR MODEL SERIAL LAST CAL. Due. CAL TYPE NUMBER NUMBER Test Receiver Rohde & Schwarz ESCS30 828985/018 May 20, 2017 May 19, 2018 L.I.S.N. Schwarzbeck NNLK8129 8129203 May 20, 2017 May 19, 2018 50Ω Coaxial Switch Anritsu MP59B M20531 N/A N/A TRF No：FCC 15.247/A Page 8 of 17 Report No: ES171027986W02 Ver.1.0

Access to the World 4.6 Test Result N/A The EUT power supply is DC 6V via 4*AA batteries, So this test item is not applicable. TRF No：FCC 15.247/A Page 9 of 17 Report No: ES171027986W02 Ver.1.0

Access to the World 5. Radiated Emission Test 5.1 Measurement Procedure 1. The EUT was placed on a turn table which is 0.8m above ground plane. 2. Maximum procedure was performed on the six highest emissions to ensure EUT compliance. 3. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 4. Repeat above procedures until all frequency measured was complete. When spectrum scanned from 9KHz to 150KHz setting resolution bandwidth 200Hz and video bandwidth 1kHz. EMI Test Receiver Setting Attenuation Auto RB 200Hz VB 1kHz Detector QP Trace Max hold When spectrum scanned from 150KHz to 30MHz setting resolution bandwidth 9 kHz and video bandwidth 30kHz. EMI Test Receiver Setting Attenuation Auto RB 9kHz VB 30kHz Detector QP Trace Max hold When spectrum scanned from 30 MHz to 1GHz setting resolution bandwidth 120 kHz and video bandwidth 300kHz. EMI Test Receiver Setting Attenuation Auto RB 120kHz VB 300kHz Detector QP Trace Max hold TRF No：FCC 15.247/A Page 10 of 17 Report No: ES171027986W02 Ver.1.0

Access to the World 5.2 Test SET-UP (Block Diagram of Configuration) (A) Radiated Emission Test Set-Up, Frequency Below 30MHz Turntable 3m EUT Test 0.8 m Receiver Ground Plane Coaxial Cable (B) Radiated Emission Test Set-Up, Frequency Below 1000MHz 3m Turntable 1m to 4m EUT Spectrum Analyzer 0.8m Ground Plane Coaxial Cable 5.3 Measurement Equipment Used: EQUIPMENT MFR MODEL SERIAL LAST CAL. DUE CAL. TYPE NUMBER NUMBER EMI Test Receiver Rohde & Schwarz ESU 1302.6005.26 May 21, 2017 May 20, 2018 Pre-Amplifier HP 8447F 2944A07999 May 20, 2017 May 19, 2018 Bilog Antenna Schwarzbeck VULB9163 142 May 20, 2017 May 19, 2018 Loop Antenna ARA PLA-1030/B 1029 May 20, 2017 May 19, 2018 Horn Antenna Schwarzbeck BBHA 9170 BBHA9170399 May 21, 2017 May 20, 2018 Horn Antenna Schwarzbeck BBHA 9120 D143 May 20, 2017 May 19, 2018 Cable Schwarzbeck AK9513 ACRX1 May 21, 2017 May 20, 2018 Cable Rosenberger N/A FP2RX2 May 21, 2017 May 20, 2018 Cable Schwarzbeck AK9513 CRPX1 May 21, 2017 May 20, 2018 Cable Schwarzbeck AK9513 CRRX2 May 21, 2017 May 20, 2018 TRF No：FCC 15.247/A Page 11 of 17 Report No: ES171027986W02 Ver.1.0

EMITEK 5.4 Measurement Result Note: the amplitude of spurious emission that is attenuated by more than 20dB below the permissible Limit. Operation Mode: ON Test Date : November 12, 2017 Frequency Range: 9KHz~30MHz Temperature : 24°C Test Result: PASS Humidity : 53 % Measured Distance: 3m Test By: KK X: 140.0 dBuv Limit1: —— 130 120 110 100 90 80 70 60 50 40 30 20.0 0.003 (MHz] 0.150 120.0 dBu¥/m 110 100 90 80 70 60 50 40 30 20 10 0.0 0.150 0.5 (MHz] 5 30.000 TRF No : FCC 15.247/A Page 12 of 17 Report No: ES171027986W02 Ver.1.0

EMITEK ¥: 140.0 dBuy Limit1: —— 130 Margin: «—— 120 110 100 90 so zo so 50 40 30 20.0 0.003 (MHz] 0.150 120.0 dBu¥/m Limit1: — 110 Margin: i« 100 90 80 70 60 50 40 30 20 10 0.0 0.150 0.5 (MHz] 5 30.000 TRF No : FCC 15.247/A Page 13 of 17 Report No: ES171027986W02 Ver.1.0

EMITEK Z: 140.0 aBuy Limit1: =—— 130 Margin: w« 120 110 100 90 80 70 60 50 40 30 20.0 0.003 (MHz] 0.150 120.0 dBu¥/m 110 Margin: «—— 100 90 80 70 60 50 40 30 20 10 0.0 0.150 0.5 (MHz] 5 30.000 Note: the Fundamental Emission is less than the spurious emission Limit, the bandage test is not need. TRF No : FCC 15.247/A Page 14 of 17 Report No: ES171027986W02 Ver.1.0

EMITEK Operation Mode: ON Test Date : November 12, 2017 Frequency Range: 30~1000MHz Temperature : 24°C Test Result: PASS Humidity : 53 % Measured Distance: 3m Test By: KK 80.0 dBu¥/m Limitl: —— Margim: — 70 60 50 w L__LO_L_LLLFr——— 20.000 40 5o 60 70 00 CIS] a00 400 500 600 700 1000.000 Site 3m Chamber #3 Polarization: Horizontal Temperature: 24 C Limit: (RE)FCC PART 15 CLASS B Power: DC 6V Humidity: 53% Mode: 125KHz TX Note: Reading Correct Measure— Antenna Table No. Mk. Freq. Level Factor ment Limit Over Height Degree MHz dBuv 08 dBuV/im dBuV/im dB Detector m degree Comment 1 36.0007 30.67 —16.54 14.13 40.00 —25.87 OP 2 56.0007 29.95 —14.69 15.26 40.00 —24.74 OP $ 80.9274 26.82 —16.50 10.32 40.00 —29.68 OP 4 111.7380 25.98 —16.00 9.98 4350 —33.52 OP 6 333.6865 26.01 —11.18 14.83 46.00 —31.17 OP 6 * 625.0780 26.49 4.80 21.69 46.00 —24.31 P *:Maximum data x:Overlimit Fover margin Operator:. LQZ TRF No : FCC 15.247/A Page 15 of 17 Report No: ES171027986W02 Ver.1.0

EMITEK 80.0 dBu¥/m Limit1: — Margin: — 70 co 50 we T TT—————H ksscT 20000 40 Site 3m Chamber #3 5o 60 70 90 Limit: (RE)FCC PART 15 CLASS B (MHz) Polarization: Vemcal Power: DC 6V soo 600 700 Temperature: Humidity: 1000.000 24C 53 % Mode: 125KHz TX Note: Reading Correct Measure— Antenna Table No. Mk. Freq. Level Factor ment Limit Over Height Degree MHz dBuy dB dBuVim dBuVim dB Detector cm degree Comment 1 36.0007 28.21 —16.54 11.67 40.00 —28.33 P 2 43.6584 26.30 —14.24 12.06 40.00 —27.94 OP 3 56.3947 27.82 —14.83 12.99 40.00 —27.01 P 4 78.1388 3243 —19.83 12.60 40.00 —27.40 P 5 104.1701 26.24 —15.61 10.63 43.50 —3287 OP 6 * 687.1506 27.35 —3.92 2343 46.00 —22.57 OP *:Maximum data x:Over limit Fover margin Operator: LQZ TRF No : FCC 15.247/A Page 16 of 17 Report No: ES171027986W02 Ver.1.0

Access to the World 6. Antenna Application Antenna Requirement Standard Requirement An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. This requirement does not apply to carrier FCC CRF Part 15.203 current devices or to devices operated under the provisions of §15.211, §15.213, §15.217, §15.219, or §15.221. Further, this requirement does not apply to intentional radiators that must be professionally installed, such as perimeter protection systems and some field disturbance sensors, or to other intentional radiators which, in accordance with §15.31(d), must be measured at the installation site. However, the installer shall be responsible for ensuring that the proper antenna is employed so that the limits in this part are not exceeded. For intentional device, according to FCC 47 CFR Section 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. if transmitting antennas of directional gain greater than 6dBi are used, the power shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6dBi. Result The EUT’S antenna is coil antenna, The antenna’s gain is 0dBi and meets the requirement. and the antenna can’t be replaced by the user,which in accordance to section 15.203. The antenna dimension: 0.02*2+0.04*2=0.12m<0.625*λ(0.625*c/f=1500m), the detail see the internal Photo. TRF No：FCC 15.247/A Page 17 of 17 Report No: ES171027986W02 Ver.1.0


Document Created: 2017-12-18 13:32:37
Document Modified: 2017-12-18 13:32:37
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC