Users Manual

FCC ID: 2AJ55HOLYSTONEDE

Users Manual

Download: PDF
FCCID_4221890

C8e Instructions For Use Vil HS161 #. usa@hobstone.com (USA) eu@hojstone.com (EU) ca@hobstonecom (CA] jp@holystonccom () © iess sssseso www holystone.com

Contents rcce———@A—A————GGGrrrrrrrrrrrrrrre 1.0 DiSCI@IMEr&WAFNING .........ccccccmmmmenene. 2.0 Safety Guidelines ....... 1.0 DISCLAIMER & WARNING 3.0 Maintenance . 4.0 Package Contents .......... 1. Please read this Disclaimer & Warning and Safety Guidelines carefully 5.0 Drone‘s Details ........ before using our product. This product is not recommended for people 6.0 Transmitter Details under the age of 14. By using this product, you hereby agree to this disclaim— 7.0 Low Battery Warning er and signify that you have read it fully. You agree that you are responsible 8.0 Joystick Mode ........ for your own conduct and any damaged caused while using this product, 9.0 Charging the Battery and its consequences . You agree to use this product only for purposes that Drone Battery ..... Transmitter Battery are proper and in accordance with local regulations, terms and all applicable 10.0 Installation polices and guidelines Holy Stome may make available. Protection Guards 12 2. When using this product, please be sure to strictly abide by the specifica— Drone‘s Battery « 12 tion requirements and safety guidelines stated in this document. Any person— 1 1.0 Using the Application al injury property damage, legal disputes and all other adverse events caused Download APP .. 13 by the violation of the safety instructions or due to any other factor, WILL Connect Wi—Fi Networks ........ 13 NOT be Holy Stone‘s responsibility. 12.0 Operation Guide Pairing 14 Calibrating the Gyro 15 2.0 SAFETY GUIDELINES One Key Start / Landing 15 2.1 Check Before Use 13.0 Functions Details @ This product is not a toy, butit is a high precision drone that integrates Trimmer 16 Emergency Stop ........ 17 various electronic stability and control mechanisms. Please be sure to setup Speed Switch 17 this drone carefully and correctly to ensure safe, accident—free operation. Mobile Power Function ........ 18 @ Please be sure that the batteries of the drone and transmitter are clean, Floodlight Function 18 undamaged and, fully charged. Take Photo/ Video 18 @ Please be sure that all the propellers are undamaged and are installed in Optical Flow Mode ......... «20 the correct orientation. Headless Mode .21 14.0 SD@CIfIC@tION .........ccensnnnenmenmemmmnemnenees 22 15.0 Trouble Shooting ... 24 16.0 General Information 25

[ [ @ Please do a thorough check of the product before each use. Inspect the 2.3 Operations Requirements integrity of the parts, any signs of cracks and wear of the propeller, battery W Do not follow moving vehicles. power and effectiveness of the indicator, etc. If after doing a complete check @ During the flight, only turn off the motor in case of an emergency. any issues are found, please refrain from using the product until the issue has @ Please flight the drone back to you as soon as possible when the battery is been resolved. running low. 2.2 Flight Environment @ This product should not be used while drinking alcohol, if you are feeling fatigued, taking medicine, or feeling any physical discomfort. am ®) Beware of the noise volume the drone produces. Keep your distance to avoid ear damage. ¥ Fly in Open Areas Maintain Line Fly Below of Sight 197 feet (60 m) @8 (s) @) ® Stay away from the rotating No Fly Zone &A sA I”II |“| m ” oD TAT ffifi ) A propellers and motors. 2.4 Use of Battery Avoid flying over or near obstacles, crowds, high voltage W Please ensure batteries are fitted in the correct orientation as shown in the power lines, trees, airport or bodies of water. instruction manual. DO NOT fly near strong electromagnetic sources such as @ Avoid short circuits by fitting the batteries incorrectly, and do not crush or power lines and base stations as it may affect the onboard squeeze the batteries as this could carry the risk of an explosion. compass. @ Do not mix new and old batteries as this can lead to a poor performance of the product. 8 $ Q Q #£ 3 @ Dispose used batteries carefully, do notlitter. ®) Please keep dead batteries away from heat and fire. DO NOT use the drone in adverse weather conditions such © If the device is not going to be used for an extended period of time, as rain, snow, fog and strong wind. remove batteries to prevent potential damage from battery leakage. _2_

4B G:a#z ® If the device is not going to be used for an extended period of time, 3.0 MAINTENANCE remove batteries to prevent potential damage from battery leakage. 1. Clean the product after each use with a clean, soft cloth. It is recommended to only use the USB charging cable that comes with 2. Avoid prolonged exposure to direct sunlight and avoid buildup of heat on the drone to charge the battery. the drone. ® Don‘t connect the battery directly to wall outlets or car. cigarette —lighter 3. This device is not waterproof and must not be submerged in water under sockets. any circumstance. Failure to maintain the device completely dry will result in 0 Don‘t attempt to disassemble or modify the battery in any way. the failure of the unit. M Don‘t use the battery if it gives off an odor, generates heat, becomes 4. Check the charging plug and other accessories for signs of damage discolored or deformed,or appears abnormal in any way. If the battery is in frequently. If any part of the device is damaged, refrain from flying until use or being charged, remove it from the device or charger immediately and maintenance can be carried out. discontinue use. 2 Don‘t pierce the battery casing with a nail or other sharp object, break it open with a hammer, or step on it! changes or modifications not expressly approved by the party responsible for compliance could void the M Always charge the batteries in a fireproof container and away from user‘s authority to operate the equipment. combustible materials. Don‘t charge on surfaces that can catch fire. This This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant includes: wood, cloth, carpet, or in the application‘s device. to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferencein a residential installation. This equipment generates, uses and can radiate radio frequency 1 Don‘t immerse the battery in water or allow it to get wert. energy and, if not installed and used in accordance with the instructions, may cause harmful interference 9 Don‘t solder battery terminal directly. to radio communications. However, there is no guarantee that interference will not occur in a particular installation. 16 Keep battery out of reach of children or pets. If this equipment does cause harmful interference to radio or television reception, which can be 7 Don‘t short—circuit the battery by connecting wires or other metal object to determined by turning the equipment off and on, the user is encouraged to try to correct the interference the positive(+] and negative{—) terminals. by one or more of thefollowing measures: —— Reorient or relocate the receiving antenna. —— Increase the separation between the equipment and receiver. —— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Li—Po Battery Disposal & Recycling “ —— Consult the dealeror an experienced radio/TV technician for help. Waste Lithium—polymer batteries must not be placed with household trash. ‘ This equipment complies with FCC radiation exposure limits set forth for an uncontrolled Please contact local environmental or waste agency or the waste agency u’ o or the supplier of your model or your nearest Li—Po battery recycling center. environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co—located or operating in conjunction with any other antenna or transmitter.

m Mess 4.0 PACKAGE CONTENTS 5.0 DRONE‘S DETAILS No. Part Name Picture Oty. Power Switch Battery Level Indicator > * j 1 Drone Propeller A —yol__ & )' C Propelier B oo L 3 1 2 Transmitter s & \ Camera Button * 1 Video Button 3 Drone Battery Propelier B ( iss —/ e / _ {; 2s USB Charging SP tle e —o | *a L)> «9< ] [ \@ f y * Cable Floodlight >)\\§3 Propeller A N_t a2 a8 4 5 Propellers HD Camera ; 6 Propeller Spanner a Protection 2 Guards 8GB TF Card l 8 (on the fuselage]) yz 86B Card Reader | 1 9 Battery Compartme Screwdriver 1 10 i 11 Instructions For Use Floodlight Switch

Gut mm Guo 6.0 TRANSMITTER DETAILS 8.0 JOYSTICK MODE 8.1 MODE 2 (Default Setting) Left Joystick Right Joystick Phone Holder ———————————— Take Photo/ Up Ascend Forward Speed Switch/ Record Video Optical Flow Mode Left Joystick Right Joystick (@ K W z,,,:%‘j ) € t= z> Charging Indicator \&ifl/ Power Indicator Neg" v Tum Onvtum Of Calibrate the Gyro Down Descend Backward One Key Start Trimmer Button ¥ 4ss ¥ One Key Landing (y= @flt Tu mleft _ Turn Right |{ Left ‘\@* // /‘/(:\h\\\ Right —<< 3 > Headless Mode Fly to Left |_ Fly to Right 8.2 MODE 1 To enter MODE 1, turn on the transmittter while holding the " Speed 7.0 LOW BATTERY WARNING Switch" button. (Please do not release the " Speed Switch" button until the transmitter is powered on.) DRONE: When the drone battery runs low, the indicator lights on the drone Left Joystick Right Joystick Ay 4. will blink continuously, and the transmitter will constantly beep. About 1 Forward Up Ascend Up minute or so the drone will automatically land on low battery power. TRANSMITTER: When the transmitter battery runs low, the power indicator A. of the transmitter will blink continuously and the transmitter will keep \\\\fgfj/w — beeping. V V Down Backward Down Descend 64 >¥ K;§\ cce Left //7%@\ Right Turn Left Turn Right ‘Lefl,‘x/@“\ | Right t\ * /mz $) | <«@e @ /,fi» (G+ Fly to Left |_ Fly to Right :5////

[ [ 9.0 CHARGING THE BATTERY 9.2 Transmitter Battery Please charge the drone and the transmitter when the power is off. 9.1 Drone Battery hy P P _ zxA USB Adapter (5V/0.5—2.0A) \\\j\J l2 USB Adapter & \ (5V/0.5—2.0) @> """"" Ay Xfl Charging N o Power Bank C es > interface [4" _ w ‘\ A Power Bank ( 1J «* o <G Computer USB Port NA ««;‘jCL Computer USB Port 1) Connect USB charging cable and transmitter charging interface. 1) There are two ways to charge drone battery: 2) Plug the USB charging cable in to a USB charging port on the computer, @ Put the battery into the battery compartment of the drone, and power bank or USB adapter.{[5V @ 0.5 to 2.0A ] connect the USB charging cable to the charging interface of the drone body. 3) The red indicator light on the transmitter will turn on when the battery is @ Remove the battery and connect the USB charging cable to the charging, and will turn green when the battery is fully charged. battery charging interface (the charging efficiency of this method is more efficient). d Before charging, please check the contents of the " Use of Battery" 2) Plug the USB charging cable in to a USB charging port on the computer, section of the " Safety Guidelines" carefully! power bank or USB adapter (5V @ 0.5 to 2.0A }. 3) The red indicator light will turn on when the battery is charging, and will turn green when the battery is fully charged. d Before charging, please check the contents of the " Use of Battery" section of the " Safety Guidelines" carefully! _10_ _11_

C83 [ ce 10.0 INSTALLATION 1 1.0 USING THE APPLICATION 10.1 Protection Guards 1 1.1 Download APP Android APP on Google play As shown in picture, install the protection guards to the motor base accord— ing to the "A/ B" corresponding position. Scan the QR code, connect to the App Store"" or Google"" Play and download the " HS Easy Fly " application for free. Required Operating Systems: i0S 7.0 or later / Android 4.4.0 or later 10.2 Drone‘s Battery Installation: Put the "A" side into the 1 1.2 Connect Wi—Fi Networks battery compartment, and then put Connect your smart phone to the Wi—Fi of the Drone and check the the "B" side into the battery compart— drone‘s status on the " HS Easy Fly " App. ment to complete the installation. @WOn your smartphone, launch a search of the available Wi—Fi networks; @ Select the Wi—Fi network: HolyStoneFPV #**; @ Wait for your smartphone to connect Wi—Fi network of the drone. This connection is generally represented by the Wi—Fi logo appearing on Removal: Turn the battery lock your smartphone‘s screen. button to the right without releasing @ Enter the HS Easy Fly application. it, then remove the battery. > The connection between your smartphone and the Drone is established automatically.

GuB C43 12.0 OPERATION GUIDE 12.2 Calibrating the Gyro All of the following operations on this manual takes MODE 2 for Long press the Calibrate the Gyro button example. for 2 seconds to calibrate the gyroscope of drone. Once the LED lights start to flash 12.1 Pairing rapidly, the gyroscope is being calibrated. ~ /4‘#‘}5‘% When the lights turn solid, calibration is 0 /XA g # complete. W Please unfold the collapsible arms 9» before flight. 9 \( ?J;\/i Tips: To ensure a stable flight, we suggest that the pilot calibrates the d s_ / gyro every time after pairing the drone and after a crash. HEAD @ Place the drone on a flat and level Ef > surface with the head forward and the rovenconPipprennneeneetworePrrfernnnrrnipoiivmmmcceeee tail towards the pilot. 12.3 One Key Start/ Landing @ After pairing / calibration, press the One @ Power on the drone and the ) Ts Key Start button, the propellers will start _ transmitter. i. $ k. spinning, indicating this drone is ready to fly, you can control using thejoystick. @ When the drone is flying, press the One Key Landing button, the drone will land by @ Push the leftjoystick up then down itself. to pair the drone with the transmitter. 2 beeps will be heard from the transmitter, and the LED indicator lights on the drone will turn solid if the drone is paired successfully. _14,

[BA 13.0 FUNCTIONS DETAILS 13.2 Speed Switch 13.1 Trimmer Function This drone comes with 3 speed modes (Low/ Medium/ High). Press the Speed Switch button on the upper left of the transmitter to switch the speed. Increase one speed at a time. "Di" indicates Low speed; "Di Di" indicates Medium speed and "Di Di Di" indicates High speed. (The Low Speed is default speed mode.) F/B Sideward Fly Trim : If the drone drifts forward, press the trimmer button and push the right joystick down at the same time to re—balance the drone. If the drone drifts backward, press the trimmer button and push the right joystick up at the same time to re—balance the drone. 13.3 Emergency Stop L The Emergency Stop function can be only used in case of emergency .. (©@: during the flight to avoid any of damage or injury. Press the upper left and upper right button of the transmitter at the same time, L/R Sideward Fly Trim: If the drone drifts left, press the trimmer button and the motors will stop immediately. push the right joystick right at the same time to re—balance the drone. If the drone drifts to right, press the trimmer button and push the right joystick left at the same time to re—balance the drone. {When you hear a long beep from the transmitter, it indicates that it has been adjusted to the limit.) _16_ ,17¥

C83 [ Oe 13.4 Mobile Power Function (@) Record Video: Long press the Photo / Video button on the transmitter, 2 When using the Mobile Power Function, beeps from the transmitter will be heard. This tells you that the camera has connect the drone and the mobile phone started recording video. By pressing the Photo / Video button again, 2 beeps with the phone charging cable (Not from the transmitter indicates to exit recording. included}, and the drone will charge the phone. 13.6.2 Handheld Camera/Video Mode 13.5 Floodlight Function As shown in the figure, push the Floodlight Switch to ON, and the floodlight at the head of the drone will turn on. Push the switch to OFF to turn off % \ Pic.1 Pic.2 the floodlight. In the nomn—flight state, long press the Power Switch [Pic.1) to enter the 13.6 Take Photo / Video Handheld Camera/Video Mode, and the Handheld Camera/Video Indicator (hereinafter referred to as the indicator) lights up. Long press the power Do not take photos during the recording, which will interrupt the switch again to exit. recording. W Take Photo: Short press the " * button on the fuselage [Pic.2}, the 13.6.1 Remote Camera/Video Mode indicator flashes four times, indicating a picture has been taken. @ Record Video: Press the " £**%" button on the fuselage [Pic.2), the indicator W Take Photo: Short press the Photo / keeps flashing, and the camera starts recording. Press the " {*% " button again Video button on the transmitter to take to exit recording. pictures. When one beep is heard from Tips: the transmitter, this indicates the camera In the nom—flying state, it is necessary to install a TF card on the drone or has successfully taken a picture. connect the drone with the mobile phone and enter the APP. _18_

[ e 13.8 Headless Mode 1. After pairing/ calibration, or during the flight of the drone, press the Headless Mode button on the transmitter. The indicator lights on the drone start to flash continuously, and the transmitter will beep constantly to indicate that drone is in Headless Mode. 2. Press the Headless Mode button again, and you will hear 2 beeps, the LED indicator lights on the drone will be solid which indicates the drone exits the Headless Mode. The drone is in Optical Flow Mode by default each timeit is turned on. Long press the "Speed Switch" button in the upperleft corner of the transmitter to t _ HEAD(,. ~__ exit the Optical Flow Mode, the transmitter makes a long beep and the lights 4/ on the drone flash twice. Long press again to enter. The performance of the Optical Flow System is affected by the surface being flown over. When affected, the drone‘s indicator light will keep flashing and it is recommended to exit the Optical Flow Mode. is Operate the drone with great caution in the following situations: W In lowaltitude (under 0.5m/1.5ft) rapid flight, the Optical Flow System may be unable to locate. @ Flying over monochrome surfaces (e.g. pure black, pure white, pure red). Please make sure the pilot to stay in the same orientation @ Flying over a highly reflective surfaces. as the drone head faces when the drone takes off. @ Flying over water or transparent surfaces. Under Headless Mode, the forward direction is the direction that the head of ®) Flying over moving surfaces or objects. drone faces when the drone takes off. In order to make sure the pilot can tell © Flying over small and fine objects (e.g. tree branches and power lines]. drone‘s direction, we recommend that pilots to stay in the same orientation ® Flying in an area where the lighting changes frequently or drastically. as the drone‘s head faces when the drone takes off. When the pilot pushes Elying over surfaces without clear patterns or texture. the directionjoystick forward, the drone will fly forward. If the pilot pushes the ® Flying over surfaces with identical repeating patterns or textures (e.g. direction joystick backward, the drone will fly towards him/her. If the pilot tiling). move the right stick left/right, the drone will move left/right relative to you.

[ [ petiemmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm 14.0 SPECIFICATIONS * TRANSMITTER * DRONE Operating Frequency: 2.4 GHz Model: HS161 Transmission Distance: 100m (outdoors and unobstructed) Weight: 129q/ 4.550z Operating Temperature Range: 32° to 104°F (0° to 40°C) Flight Time: 9.5 minutes Battery: Li—Po Battery 3.7V / 250mAh Motor Model: 8620 Charging Method USB (5V): USB charging cable (Micro—USB} Operating Temperature Range: 32° to 104°F (0° to 40°C) Charging Time: 40~60 minutes (depends on charging power and remain— Dimensions: 255 x 220 x 32mm Ing battery power) * DRONE BATTERY CAMERA Capacity: 1000mAh Lens Angle : 55 °~60 ° Voltage: 3.7 V Video/Photo Resolution: HD 1920 x 1080p Battery Type: Li—Po Battery Image Return Distance: 50m (outdoors and unobstructed) Charging Temperature Range: 41° to 104°F (5° to 40°C) Transmission frame rate: 25~30 fps Charging Time: 110 minutes (depends on charging power and remaining Photo: JPEG battery power) Video: AVI Operating Temperature Range: 32° to 104°F (0° to 40°C) USB CHARGING CABLE Voltage: 5 V Rated Power: <10 W ,227

C42e iss 15.0 TROUBLE SHOOTING 16.0 GENERAL INFORMATION FCC Notice: Problems Reasons Solutions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: The indication lights of 1.Communication between 1. Refer to the preparation the drone are flashing the drone and transmitter is for flight and pair again. {1) This device may not cause harmful interference. and does not respond not correct. 2. Recharge the battery. (2) This device must accept any interference received, including interference to the transmitter. 2.Battery poweris low. that may cause undesired operation. The propellers spin but 1. The propellers are assemb— 1. Replace the propellers accor— the drone is unable to ed in wrong crientation. ding to the motors. NOTE: This equipment has been tested and found to comply with the limits take off. 2. The propellers are damaged\ 2. Replace the propellers for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interfer— The drone shakes hard— The propellers are damaged . Replace the propellers ence in a residential installation. This equipment generates uses and can ly in flight. radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica— (The drone becomes out Gyro sensor lose it‘s balanc Place drone on a level surf— tions. However, there is no guarantee that interference will not occur in a of control after crashing e after crashing. ace for 5—10 seconds, and re{ particular installation. If this equipment does cause harmful interference to calibrate the gyro. radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer— ence by one or more of the following measures: Please do not hesitate to contact us if you need further support. —Reorient or relocate the receiving antenna. **_ usa@holystone.com (USA) eu@holystone.com (EU) —Increase the separation between the equipment and receiver. ca@holystone.com [CA) jp@holystone.com (JP) —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. © 1(855) 888—6699 —Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. _24_

[ raminooooom~ m RF Exposure Deéclaration d‘exposition aux radiations: The equipment complies with FCC radiation exposure limits set forth for an Cet équipement est conforme aux limites d‘exposition aux rayonnements IC uncontrolled environment. This device should be installed and operated with établies pour un environnement non contrdlé. Cet équipement doit étre minimum distance 20cm between the radiator & your body. installé et utilisé avec un minimum de 20 cm de distance entre lasource de rayonnement et votre corps. IC Notice: This device complies with Canada Industry licence—exempt RSS standard(s). HOW TO RECYCLE THIS PRODUCT Operation is subject to the following two conditions: This symbol on the product or its documentation indicates thatit must not be {1) this device may not cause interference; and disposed of with household waste. {2) this device must accept any interference. Including interference that may Uncontrolled waste disposal may harm the environment or human health. cause undesired operation of the device. Please separate your device from other types of waste to recycle it responsi— bly. CAN ICES—3 (B) This will help to foster the sustainable re—use of material resources. Avis d‘Industrie Canada We invite you to contact your retailer or inquire at your local town hallto find Le présent appareil est conforme aux CNR d‘industrie Canada applicables aux out where and how the drone can be recycled. K appareils radio exem pts de licence L‘exploitation est autorisée aux deux conditions suivantes: BATTERY WARNING: 1) lappareil ne doit pas produire de brouillage; et m 1. Failure to follow all the instructions may result in serious injury, irreparable 2) lutillsateur de l‘appareil doit accepterbrouillage radioélectrique subi meme damage to the battery and may cause a fire, smoke or explosion. si le brouillage est susceptible d‘encompromettre le fonctionnement. mauvais 2. Always check the battery‘s condition before charging or using it. fonctionnement de lappareil. Cet appareil numériquie de la classe B est 3. Replace the battery if it has been dropped, or in case of odour, overheating, conforme a la norme NMB—003 du Canada. discolouration, deformation or leakage. 4. Never use anything other than the approval LiPo charger the battery. CAN NMB—3 (B) Always use a balancing charger for LiPo cells or a LiPo cell balancer. It is RF Exposure recommended that you do not to use any other charger than the one Radiation Exposure Statement: provided with the product. This equipment complies with IC radiation exposure limits set forth for an 5. The battery temperature must never exceed 60°C(140°F) otherwise the uncontrolled environment. This equipment should be installed and operated battery could be damaged or ignite. with minimum distance 20cm between the radiator & your body.

[ [ 5. The battery temperature must never exceed 60°C(140°F) otherwise the EU RF Power{EIRP): 22.75dBm (2404MHz ~ 2480 MHz) battery could be damaged or ignite. 6. Never charger on a flammable surface, near flammable products or inside Caution a vehicle{perferably place the battery in a non—flammable and nonconductive 1.The max operating of the EUT is 45°C. and shouldn‘t be lower than —10°C. container). 2.The device complies with RF specifications when the device used at Omm 7. Never leave the battery unattended during the charging process. Never form your body. disassemble or modify the housing‘s wiring, or puncture the cells. Always 3.Declaration of Conformity. ensure that the charger output voltage corresponds to the voltage of the battery. Do not short circuit the batteries. We, Xiamen Huoshiquan Import & Export CO., LTD 8. Never expose the LiPo battery to moisture or direct sunlight, or store it in a hereby, declare that the essential requirements compliance with the place where temperatures could exceed 60°C(car in the sun, for example). Directive 2014/53/EU, the RoHS Directive 20 1 1/65/EU and Safety 9. Always keep it out of reach of children. Directive 2009/48/EC have been fully fulfilled on our product with 10. Improper battery use may result in a fire, explosion or other hazard. indication below: 11. Nom—rechargeable batteries are not to be recharged. Rechargeable Product Name: Remote control four axis series batteries are only to be charged under adult supervision. Model/Mark : HS161/HOLYSTONE 12. Different types of batteries or new and used batteries are not to be mixed. The Statement of compliance is available at the following address: 13. Batteries are to be inserted with the correct polarity. http;//mww.holystone.com/docs/HS 16 1_EU_DOC.pdf 14. The supply terminals are not to be short—circuited. Regular examination of transformer or battery charger for any damage to their cord, plug, enclosure This product can be used across EU member states. and other parts and they must not be used until the damage has been repaired. MANUFACTURER INFORMATION 15. The packaging has to be kept since it contains important information. Manufactured by 16. The toy is only to be connected to Class II equipment bearing the symbol. Xiamen Huoshiquan Import & Export CO., LTD [=] Room 703,N0. 81 3—2 Xiahe Road, Siming District, XIAMEN, China +1(855) 888—6699 L®@scc@®@ Made in China


Document Created: 2019-01-05 14:49:04
Document Modified: 2019-01-05 14:49:04
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC