14_TPS360 TestRpt DTS-WiFi p1

FCC ID: 2AJ2B-TPS360

Test Report

Download: PDF
FCCID_3924324

Page 1 of 48 FCC Test Report Report No.: AGC01684180501FE04 FCC ID : 2AJ2B-TPS360 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Handheld Fingerprint Terminal BRAND NAME : N/A MODEL NAME : TPS360 CLIENT : Telepower Communication Co., Ltd DATE OF ISSUE : June 15, 2018 STANDARD(S) FCC Part 15.247 : TEST PROCEDURE(S) KDB 558074 D01 DTS Meas Guidance v04 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context.

Report No.: AGC01684180501FE04 Page 2 of 48 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / June 15, 2018 Valid Original Report

Report No.: AGC01684180501FE04 Page 3 of 48 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY.................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCYS ....................................................................................................... 6 2.3. IEEE 802.11N MODULATION SCHEME .................................................................................................... 7 2.4. RELATED SUBMITTAL(S) / GRANT (S) .................................................................................................... 7 2.5. TEST METHODOLOGY ............................................................................................................................. 8 2.6. SPECIAL ACCESSORIES ......................................................................................................................... 8 2.7. EQUIPMENT MODIFICATIONS................................................................................................................. 8 3. MEASUREMENT UNCERTAINTY ................................................................................................................... 9 4. DESCRIPTION OF TEST MODES ................................................................................................................. 10 5. SYSTEM TEST CONFIGURATION ................................................................................................................ 11 5.1. CONFIGURATION OF EUT SYSTEM...................................................................................................... 11 5.2. EQUIPMENT USED IN EUT SYSTEM ..................................................................................................... 11 5.3. SUMMARY OF TEST RESULTS .............................................................................................................. 11 6. TEST FACILITY .............................................................................................................................................. 12 7. OUTPUT POWER ........................................................................................................................................... 13 7.1. MEASUREMENT PROCEDURE ............................................................................................................. 13 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 13 7.3. LIMITS AND MEASUREMENT RESULT.................................................................................................. 14 8. 6DB BANDWIDTH .......................................................................................................................................... 16 8.1. MEASUREMENT PROCEDURE ............................................................................................................. 16 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 16 8.3. LIMITS AND MEASUREMENT RESULTS ............................................................................................... 17 9. CONDUCTED SPURIOUS EMISSION........................................................................................................... 20 9.1. MEASUREMENT PROCEDURE ............................................................................................................. 20 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 20 9.3. MEASUREMENT EQUIPMENT USED .................................................................................................... 20 9.4. LIMITS AND MEASUREMENT RESULT.................................................................................................. 21 10. MAXIMUM CONDUCTED OUTPUT POWER SPECTRAL DENSITY ........................................................ 28 10.1 MEASUREMENT PROCEDURE ............................................................................................................ 28 10.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................... 28 10.3 MEASUREMENT EQUIPMENT USED ................................................................................................... 28 10.4 LIMITS AND MEASUREMENT RESULT................................................................................................. 29 11. RADIATED EMISSION ................................................................................................................................. 32

Report No.: AGC01684180501FE04 Page 4 of 48 11.1. MEASUREMENT PROCEDURE............................................................................................................ 32 11.2. TEST SETUP .......................................................................................................................................... 33 11.3. LIMITS AND MEASUREMENT RESULT ................................................................................................ 34 11.4. TEST RESULT ........................................................................................................................................ 35 12. BAND EDGE EMISSION .............................................................................................................................. 38 12.1. MEASUREMENT PROCEDURE ........................................................................................................... 38 12.2. TEST SET-UP ........................................................................................................................................ 38 12.3. RADIATED TEST RESULT..................................................................................................................... 39 12.4. CONDUCTED TEST RESULT ............................................................................................................... 40 13. FCC LINE CONDUCTED EMISSION TEST ................................................................................................ 42 13.1. LIMITS OF LINE CONDUCTED EMISSION TEST ................................................................................ 42 13.2. BLOCK DIAGRAM OF LINE CONDUCTED EMISSION TEST .............................................................. 42 13.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST ........................................... 43 13.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST .......................................................... 44 13.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST .................................................................... 45 APPENDIX A: PHOTOGRAPHS OF TEST SETUP .......................................................................................... 47

Report No.: AGC01684180501FE04 Page 5 of 48 1. VERIFICATION OF CONFORMITY Applicant Telepower Communication Co., Ltd 5 Bld, Zone A, Hantian Technology Town,No.17 ShenHai RD, Nanhai District Address Foshan, China Manufacturer Telepower Communication Co., Ltd 5 Bld, Zone A, Hantian Technology Town,No.17 ShenHai RD, Nanhai District Address Foshan, China Product Designation Handheld Fingerprint Terminal Brand Name N/A Test Model TPS360 Date of test May. 28, 2018~June 15, 2018 Deviation None Condition of Test Sample Normal Report Template AGCRT-US-BGN/RF We hereby certify that: The above equipment was tested by Attestation of Global Compliance(Shenzhen) Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10 (2013) and the energy emitted by the sample EUT tested as described in this report is in compliance with requirement of FCC Part 15 Rules requirement. The test results of this report relate only to the tested sample identified in this report. Tested By Donjon Huang(Huang June 15, 2018 Dongyang) Reviewed By Bart Xie(Xie Xiaobin) June 15, 2018 Approved By Forrest Lei(Lei Yonggang) June 15, 2018 Authorized Officer

Report No.: AGC01684180501FE04 Page 6 of 48 2. GENERAL INFORMATION 2.1. PRODUCT DESCRIPTION The EUT is designed as “Handheld Fingerprint Terminal”. It is designed by way of utilizing the DSSS and OFDM technology to achieve the system operation. A major technical description of EUT is described as following Operation Frequency 2.412 GHz～2.462GHz IEEE 802.11b:15.96dBm, IEEE 802.11g:12.71dBm; Output Power IEEE 802.11n(20):12.82dBm,IEEE 802.11n(40):13.42dBm Modulation DSSS(DBPSK/DQPSK/CCK);OFDM(BPSK/QPSK/16-QAM/64-QAM) Number of channels 11 Channels (IEEE802.11(20)b/g/n)& 7 Channels (IEEE802.11(40)n) Hardware Version MAIN-360D-V2.4 Software Version TPS360_V1.0.0 Antenna Designation PIFA Antenna Antenna Gain 1.0dBi Power Supply DC3.8V by Built-in Li-ion Battery 2.2. TABLE OF CARRIER FREQUENCYS Frequency Band Channel Number Frequency 1 2412 MHZ 2 2417 MHZ 3 2422 MHZ 4 2427 MHZ 5 2432 MHZ 2400~2483.5MHZ 6 2437 MHZ 7 2442 MHZ 8 2447 MHZ 9 2452 MHZ 10 2457 MHZ 11 2462 MHZ Note: For 20MHZ bandwidth system use Channel 1 to Channel 11 For 802.11n 40MHZ bandwidth system use Channel 3 to Channel 9.

Report No.: AGC01684180501FE04 Page 7 of 48 2.3. IEEE 802.11N MODULATION SCHEME Data MCS NCBPS NDBPS rate(Mbps) Nss Modulation R NBPSC Index 800nsGI 20MHz 40MHz 20MHz 40MHz 20MHz 40MHz 0 1 BPSK 1/2 1 52 108 26 54 6.5 13.5 1 1 QPSK 1/2 2 104 216 52 108 13.0 27.0 2 1 QPSK 3/4 2 104 216 78 162 19.5 40.5 3 1 16-QAM 1/2 4 208 432 104 216 26.0 54.0 4 1 16-QAM 3/4 4 208 432 156 324 39.0 81.0 5 1 64-QAM 2/3 6 312 648 208 432 52.0 108.0 6 1 64-QAM 3/4 6 312 648 234 489 58.5 121.5 7 1 64-QAM 5/6 6 312 648 260 540 65.0 135.0 Symbol Explanation NSS Number of spatial streams R Code rate NBPSC Number of coded bits per single carrier NCBPS Number of coded bits per symbol NDBPS Number of data bits per symbol GI Guard interval 2.4. RELATED SUBMITTAL(S) / GRANT (S) This submittal(s) (test report) is intended for FCC ID: 2AJ2B-TPS360 filing to comply with the FCC Part 15 requirements.

Report No.: AGC01684180501FE04 Page 8 of 48 2.5. TEST METHODOLOGY Both conducted and radiated testing was performed according to the procedures in ANSI C63.10 (2013). Radiated testing was performed at an antenna to EUT distance 3 meters. Others testing (listed at item 5.3) was performed according to the procedures in FCC Part 15.247 rules KDB 558074 D01 DTS Meas Guidance v04. 2.6. SPECIAL ACCESSORIES Refer to section 5.2. 2.7. EQUIPMENT MODIFICATIONS Not available for this EUT intended for grant.

® F‘q * A\G § ieof Global Attestation *fi ;Ijl'“ fl; Compliance Report No.: AGC01684180501FEO4 Page 9 of 48 3. MEASUREMENT UNCERTAINTY —Uncertainty of Conducted Emission, Uc=+3.2dB — Uncertainty of Radiated Emission below 1GHz, Uc—+3.9dB — Uncertainty of Radiated Emission above 1GHz, Uc+4.8dB The results s‘ virl fii@;}" kreport refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued by/A this doc@é it cannot be reproduced except in full with our prior written permission. The more details and the authenticity of the report will be ° AGC > confirmed tfittp://www.agc-«& t.com. Attestatiq ,2fGIoba!Q o pliance Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@agc—cert.com @ 400 089 2118 Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

Report No.: AGC01684180501FE04 Page 10 of 48 4. DESCRIPTION OF TEST MODES NO. TEST MODE DESCRIPTION 1 Low channel TX 2 Middle channel TX 3 High channel TX 4 Normal operating Note: Transmit by 802.11b with Date rate (1/2/5.5/11) Transmit by 802.11g with Date rate (6/9/12/18/24/36/48/54) Transmit by 802.11n (20MHz) with Date rate (6.5/13/19.5/26/39/52/58.5/65) Transmit by 802.11n (40MHz) with Date rate (13.5/27/40.5/54/81/108/121.5/135) Note: 1. The EUT has been set to operate continuously on the lowest, middle and highest operation frequency Individually, and the eut is operating at its maximum duty cycle>or equal 98% 2. All modes under which configure applicable have been tested and the worst mode test data recording in the test report, if no other mode data. 3. For Radiated Emission, 3axis were chosen for testing for each applicable mode.

Report No.: AGC01684180501FE04 Page 11 of 48 5. SYSTEM TEST CONFIGURATION 5.1. CONFIGURATION OF EUT SYSTEM Configure: EUT Accessory 5.2. EQUIPMENT USED IN EUT SYSTEM Item Equipment Model No. ID or Specification Remark Handheld Fingerprint 1 TPS360 2AJ2B-TPS360 EUT Terminal 2 Adapter SC/10WA050200US DC 5.0V 2A Accessory 3 Battery HDT-7100 DC3.8V/ 3000mAh Accessory 4 USB N/A N/A Accessory Note: All the accessories have been used during the test in conduction emission test. 5.3. SUMMARY OF TEST RESULTS FCC RULES DESCRIPTION OF TEST RESULT §15.247 Output Power Compliant §15.247 6 dB Bandwidth Compliant §15.247 Conducted Spurious Emission Compliant §15.247 Maximum Conducted Output Power SPECTRAL Density Compliant §15.209 Radiated Emission Compliant §15.247 Band Edges Compliant §15.207 Line Conduction Emission Compliant

Report No.: AGC01684180501FE04 Page 12 of 48 6. TEST FACILITY Site Attestation of Global Compliance (Shenzhen) Co., Ltd 1-2F., Bldg.2, No.1-4, Chaxi Sanwei Technical Industrial Park, Gushu, Xixiang, Location Bao’an District B112-B113, Bldg.12, Baoan Bldg Materials Center, No.1 of Xixiang Inner Ring Road, Baoan District, Shenzhen 518012 NVLAP LAB CODE 600153-0 Designation Number CN5028 Attestation of Global Compliance(Shenzhen) Co., Ltd is accredited by National Description Voluntary Laboratory Accreditation program, NVLAP Code 600153-0 ALL TEST EQUIPMENT LIST Equipment Manufacturer Model S/N Cal. Date Cal. Due TEST RECEIVER R&S ESPI 101206 Jun.20, 2017 Jun.19, 2018 TEST RECEIVER R&S ESPI 101206 Jun.18, 2018 Jun.17, 2019 LISN R&S ESH2-Z5 100086 Aug.21, 2017 Aug.20, 2018 TEST RECEIVER R&S ESCI 10096 Jun.20, 2017 Jun.19, 2018 TEST RECEIVER R&S ESCI 10096 Jun.18, 2018 Jun.17, 2019 EXA Signal Analyzer Aglient N9010A MY53470504 Dec.08, 2017 Dec.07, 2018 Horn antenna SCHWARZBECK BBHA 9170 #768 Sep.20, 2017 Sep.19, 2018 preamplifier ChengYi EMC184045SE 980508 Sep.15, 2017 Sep.14, 2018 Double-Ridged ETS LINDGREN 3117 00034609 May.18, 2017 May.17, 2019 Waveguide Horn Broadband SCHWARZBECK BBV 9718 9718-205 Jun.20, 2017 Jun.19, 2018 Preamplifier Broadband SCHWARZBECK BBV 9718 9718-205 Jun.18, 2018 Jun.17, 2019 Preamplifier ANTENNA SCHWARZBECK VULB9168 D69250 Sep.28, 2017 Sep.27, 2018 SIGNAL ANALYZER Agilent N9020A MY52090123 Sep. 21, 2017 Sep. 20, 2018 USB Wideband Agilent U2021XA MY54110007 Sep. 21, 2017 Sep. 20, 2018 Power Sensor LOOP ANTENNA A.H SAS-562B / Mar.01, 2018 Feb.28, 2019

Report No.: AGC01684180501FE04 Page 13 of 48 7. OUTPUT POWER 7.1. MEASUREMENT PROCEDURE For max average conducted output power test: 1. Connect EUT RF output port to power probe through an RF attenuator. 2. Connect the power probe to the PC. 3. Set the EUT Work on the top, the middle and the bottom operation frequency individually. 4. Record the maximum power from the software. Note：The EUT was tested according to KDB 558074 for compliance to FCC 47CFR 15.247 requirements. 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) AVERAGE POWER SETUP EUT Attenuator Power Sensor PC

Report No.: AGC01684180501FE04 Page 14 of 48 7.3. LIMITS AND MEASUREMENT RESULT TEST ITEM OUTPUT POWER TEST MODE 802.11b with data rate 1 Frequency Average Power Applicable Limits (dBm) Pass or Fail (GHz) (dBm) 2.412 15.96 30 Pass 2.437 14.30 30 Pass 2.462 15.54 30 Pass TEST ITEM OUTPUT POWER TEST MODE 802.11g with data rate 6 Frequency Average Power Applicable Limits (dBm) Pass or Fail (GHz) (dBm) 2.412 12.71 30 Pass 2.437 11.23 30 Pass 2.462 12.58 30 Pass TEST ITEM OUTPUT POWER TEST MODE 802.11n 20 with data rate 6.5 Frequency Average Power Applicable Limits (dBm) Pass or Fail (GHz) (dBm) 2.412 12.63 30 Pass 2.437 11.64 30 Pass 2.462 12.82 30 Pass

Report No.: AGC01684180501FE04 Page 15 of 48 TEST ITEM OUTPUT POWER TEST MODE 802.11n 40 with data rate 13.5 Frequency Average Power Applicable Limits (dBm) Pass or Fail (GHz) (dBm) 2.422 10.73 30 Pass 2.437 11.32 30 Pass 2.452 13.42 30 Pass

® A\G 3 TF mize H 1 J Attestation of Global Compliance : Report No.: AGC01684180501FEO4 Page 16 of 48 8. 6dB BANDWIDTH 8.1. MEASUREMENT PROCEDURE 1. Connect EUT RF output port to the Spectrum Analyzer through an RF attenuator 2. Set the EUT Work on the top, the middle and the bottom operation frequency individually. 3. Set SPA Centre Frequency = Operation Frequency, RBW= 100 KHz, VBW >3 X RBW. 4. Set SPA Trace 1 Max hold, then View. Note: The EUT was tested according to KDB 558074 for compliance to FCC 47CFR 15.247 requirements. 8.2. TEST SET—UP (BLOCK DIAGRAM OF CONFIGURATION) Spectrum Analyzer RF Cable VE EUT The results /"" virl fii@;}" kreport refer only to the sample(s) tested unless otherwise stated and the sample(s) are retained for 30 days only. The document is issued by/A this doc@ it cannot be reproduced except in full with our prior written permission. The more details and the authenticity of the report will be confirmed tfittp://www.agc-% t.com. o Attestatic o pliance Tel: +86—755 2908 1955 Fax: +86—755 2600 8484 E—mail: agc@agc—cert.com @ 400 089 2118 iN¥ Add: 2/F. , Building 2, No.1—4, Chaxi Sanwei Technical Industrial Park,Gushu, Xixiang, Bacan District, Shenzhen, Guangdong China

Report No.: AGC01684180501FE04 Page 17 of 48 8.3. LIMITS AND MEASUREMENT RESULTS Mode Channel 6dB Bandwidth [MHz] Verdict LCH 8.098 PASS 11b MCH 8.587 PASS HCH 8.572 PASS LCH 16.39 PASS 11g MCH 16.40 PASS HCH 16.38 PASS LCH 17.60 PASS 11nHT20 MCH 17.63 PASS HCH 17.37 PASS LCH 35.17 PASS 11nHT40 MCH 35.37 PASS HCH 35.17 PASS

Report No.: AGC01684180501FE04 Page 18 of 48 Test Graph 11b-LCH 11b-MCH 11b-HCH 11g-LCH 11g-MCH 11g-HCH

Report No.: AGC01684180501FE04 Page 19 of 48 11nHT20-LCH 11nHT20-MCH 11nHT20-HCH 11nHT20-LCH 11nHT40-MCH 11nHT40-HCH

Report No.: AGC01684180501FE04 Page 20 of 48 9. CONDUCTED SPURIOUS EMISSION 9.1. MEASUREMENT PROCEDURE 1. Connect EUT RF output port to the Spectrum Analyzer through an RF attenuator 2, Set the EUT Work on the top, the middle and the bottom operation frequency individually. 3. Set SPA Trace 1 Max hold, then View. Note: The EUT was tested according to KDB 558074 for compliance to FCC 47CFR 15.247 requirements. Owing to satisfy the requirements of the number of measurement points, we set the RBW=1MHz, VBW＞RBW, scan up through 10th harmonic, and consider the tested results as the worst case, if the tested results conform to the requirement, we can deem that the real tested results(set the RBW=100KHz, VBW＞RBW) are conform to the requirement. 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) The same as described in section 8.2. 9.3. MEASUREMENT EQUIPMENT USED The same as described in section 6.

Report No.: AGC01684180501FE04 Page 21 of 48 9.4. LIMITS AND MEASUREMENT RESULT LIMITS AND MEASUREMENT RESULT Measurement Result Applicable Limits Test Data Criteria In any 100 KHz Bandwidth Outside the At least -20dBc than the limit frequency band in which the spread spectrum Specified on the BOTTOM PASS intentional radiator is operating, the radio frequency Channel power that is produce by the intentional radiator shall be at least 20 dB below that in 100KHz bandwidth within the band that contains the highest level of the desired power. At least -20dBc than the limit PASS In addition, radiation emissions which fall in the Specified on the TOP Channel restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in§15.209(a))

Report No.: AGC01684180501FE04 Page 22 of 48 Test Graph 11B-LCH 11B-LCH 11B-LCH 11B-MCH 11B-MCH 11B-MCH

Report No.: AGC01684180501FE04 Page 23 of 48 11B-HCH 11B-HCH 11B-HCH 11G-LCH 11G-LCH 11G-LCH

Report No.: AGC01684180501FE04 Page 24 of 48 11G-MCH 11G-MCH 11G-MCH 11G-HCH 11G-HCH 11G-HCH

Report No.: AGC01684180501FE04 Page 25 of 48 11nHT20-LCH 11nHT20-LCH 11nHT20-LCH 11nHT20-MCH 11nHT20-MCH 11nHT20-MCH


Document Created: 2018-07-03 14:53:44
Document Modified: 2018-07-03 14:53:44
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC