User manual

FCC ID: 2AIZN-XS03

Users Manual

Download: PDF
FCCID_4170563

Model: XSO3 Notes in order to use the speaker correctly and to ensure that it performs well, please carefully read and follow these instructions: 1.Do not hit the unit with force. 2.Do not let it get into contact with chemicals such as benzene or solvents. 3.Please do not allow it to get into close contact with strong magnetic fields or electric fields. 4.Avoid direct light or heat. 5.Do not dissemble, repair or modify it yourself. 6.To avoid causing danger, do not use the speaker and headphones when cycling, driving a car or a motoreycle. 7.Do not listen at a loud volume to avoid affecting your hearing. 8When disposing of packaging, batteries, and old electronic products, please sort and dispose of them properly. Features [Bluetooth audio] Bluetooth 4.2.0+EDR, the maximum receiving distance is 10 meters. [Bluetooth call} Clear voice, no echo. [Built—in battery) Built—in rechargeable 350mAh lithium battery, environmentally friendly, energy—saving, lasting 3—4 hours. II. Functions of buttons and jacks of product (subject to the actual product) 1. Power switch; press function @ for 2 seconds to turn on, then press @ for 2 seconds to turnoff. 2.. Play/Pause. Short press: @ to play/pause. 3. [+]: Volume increase/next song. Press and hold: @ to play the next song; short press to increase the volume in the Bluetooth/AUX mode; 4. [—}: Volume decrease/previous song. Press and hold: @ to play the previous song; short press to decrease the volume in the Bluetooth/AUX mode; 5. [USB/AUX]: Charging dock. Power charging jack. The dedicated USB power cable delivered together with this device can be connected to a computer or SV USB interface power supply for charging. The output current of the power supply should be greater than 500mA. Explanation of indicator lights: Charging indicator @ The indicator is red when the battery is being charged, and it turns blue when the battery is fully charged. © Bluetooth indicator: After @ is powered on, the Bluetooth connection indicator blinks when the Bluetooth is not connected, and is solid on after it is connected successfully. Bluetooth connection method (depending on the model, subject to the actual product): Diagram of Bluetooth Speaker Schéma de l‘enceinte Bluetooth Bluetooth Sa3Jell Gigall 2 hss 1. After turning on the device, it will say "hello, infinix" and the LED indicator will blink quickly. 2. Turn on the Bluetooth function of your mobile device (mobile phone, computer, etc.) and D. On/off button D. Bouton marche/arrét caydas;; search for the Bluetooth device "INFINIX—X—BOY" @. Play/Pause button . Bouton lecture/pause cisabyldasl ; @) . Volume +/Next song . Volume + / Piste suivante AIoll Age NGapeall s gice 5 (3) 3. After the device is clicked manually, it will automatically pair and connect. If the connection @ Volume —/Previous song @. Volume — / Piste précédente ABLIl ApieVpuall i5ghase goinis. (8) is successful, it will say "connected", and the head indicator will stop blinking and the light will ®v Charging indicator @, Indicateur de charge calll jiy. ©) stay on. (Under normal circumstances, you do not need to enter a password. If a specific ©). Charging dock ©). Dock de chargement call mel 6) model prompts you to input the password, enter "0000"). . Bluetooth pairing indicator . Indicateur d‘appairage Bluetooth Bluetooth OM 443« (@) 4. A device that has been successfully paired will be automatically connected next time. Remarks: Within 10 seconds of entering the Bluetooth mode, Bluetooth will automatically find the device and pair it. After 10 seconds, you will have to pair it manually. 5. If the Bluetooth becomes disconnected, it will prompt "disconnect" and the head indicator will blink. FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditio 6. Shutdown prompt tone — power off. ns: (1) this device may not cause harmful interference, and (2) this device must accept V How to charge: Plug one end of the power cable into the [USB/AUX] jack of the unit, and plug any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for the USB end into the USB port of a computer, or connect to a standard SV 500mA charging compliance could void the user‘s authority to operate the equipment. socket. The "red light" is on during charging, and the "red light" is off when the battery is fully charged. This unit has a built—in overcharge protection circuit, which allows to unit to be NOTE: This equipment has been tested and found to comply with the limits for a Class B digital devi ce, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectio connected to a computer or charger for a long time. It can be fully charged in about 3 hours. n against harmful interference in a residential installation. This equipment generates uses and can ra Battery life between each charge will vary with the volume during usage. diate radio frequency energy and, if not installed and used in accordance with the instructions, may c ause harmful interference to radio communications. However, there is no guarantee that interference VIL Low battery: When the power is low, the system will automnatically shut down. Please recharge will not occur in a particular installation. If this equipment does cause harmful interference to radio 0 it promptly. If you do not use the device for a long time, charge it at least once a month to r television reception, which can be determined by turning the equipment off and on, the user is enco protect the battery and extend battery life. uraged to try to correct the interference by one or moreof the following measures: — Reorient or relocate the receiving antenna. ViIL Troubleshooting 1. Q: Automatically shut down after booting? — Increase the separation between the equipment and receiver. A: The battery is low. Please recharge it promptly. It is recommended to use it after two —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. hours of charging. ~Consult the dealer or an experienced radio/TV technician for help important announcement 2. O: The blue indicator blinks quickly when the device is playing a song, then the device automatically turns off or restarts? Radiation Exposure Statement A: The battery is low. Please recharge it promptly. It is recommended to use it after two The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. hours of charging. 3. Q; Couldn‘t be recharged? A: Please use the charging cable that comes with this unit and make sure that the voltage of the USB interface being connected to is functioning normally. 4. Q: The charging red indicator does not light up or is dim? A: Check that the power is connected properly. Q: The speaker has no sound? A: Make sure the device is playing and adjust to the appropriate volume. 5. Q: The Bluetooth does not automatically connect? A: 1. Only paired devices will automatically connect; 2. Check that the Bluetooth is connected to other devices? Only one device can be connected at any one time; 3. If the Bluetooth device is not turned on until 10 seconds after the speaker enters the Bluetooth mode, the speaker may not connect automatically. 4. For details on how to use the Bluetooth, please refer to Item "6" of the manual. 6. Q: The Bluetooth has no sound? A: 1. Please check if the Bluetooth is connected successfully. 2. Is the volume of the Bluetooth device turned on? 7. Q: Is the button not functioning or malfunctioning? A: Turn it off and on again. IX. Technical specifications Output power: 3W Operating voltage: 3.7V Frequency: 100Hz—18KHz— Signal to noise ratio: 280dBA Distortion: <1% Audio input: Bluetooth Bit rate: 32Kbps—320Kbps Speaker unit: 40mm, internal magnet, 40 Input power supply: Built—in polymer rechargeable battery 350mAh 3.7V Weight: About g Size: 10. Packing accessories: 1 Mini speaker, 1 Data cable, 1 Manual


Document Created: 2019-03-24 12:10:21
Document Modified: 2019-03-24 12:10:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC