Test Report BT DTS

FCC ID: 2AIV6-TM-7PLUS

Test Report

Download: PDF
FCCID_4154852

I7] Model: TM—7PLUS FCC Part 15C Measurement and Test Report For Shenzhen Inrico Electronics Co., LTD 3/F, Building NO.118, High Tech Industrial Park, 72 Guowei Road, Luohu District, Shenzhen, China FCC ID: 2AIV6—TM—7PLUS FCC Rule(s): Part Product Description: Mobile Network Radio Tested Model: TM—7PLUS Report No.: STR181081491—5 Sample Receipt Date: 2018—10—18 Tested Date: 2018—10—19 to 2018—12—17 Issued Date: 2018—12—17 Tested By: Mike Shi / Engineer nike Shi Chan Reviewed By: Silin Chen / EMC Manager " 9 Approved & Authorized By: Jandy So / PSQ Manager J”’(ZW Prepared By: Shenzhen SEM Test Technology Co., Ltd. 1/F, Building A, Hongwei Industrial Park, Liuxian 2nd Road, Bac‘an District, Shenzhen, P.R.C. (518101) Tel.: +86—755—33663808 Fax.: +86—755—33608309 Website: www.semfest.com.cn Note: This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen SEM Test Technology Co., Ld. Report No.: STR 18108 1491—5 Page I of 31 FCC Part 15.247

Model: TM-7PLUS TABLE OF CONTENTS 1. GENERAL INFORMATION ...................................................................................................................................3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ...............................................................................3 1.2 TEST STANDARDS...................................................................................................................................................4 1.3 TEST METHODOLOGY .............................................................................................................................................4 1.4 TEST FACILITY .......................................................................................................................................................4 1.5 EUT SETUP AND TEST MODE .................................................................................................................................5 1.6 MEASUREMENT UNCERTAINTY ..............................................................................................................................5 1.7 TEST EQUIPMENT LIST AND DETAILS .....................................................................................................................6 2. SUMMARY OF TEST RESULTS ...........................................................................................................................7 3. RF EXPOSURE .........................................................................................................................................................8 3.1 STANDARD APPLICABLE.........................................................................................................................................8 3.2 TEST RESULT..........................................................................................................................................................8 4. ANTENNA REQUIREMENT ..................................................................................................................................9 4.1 STANDARD APPLICABLE.........................................................................................................................................9 4.2 EVALUATION INFORMATION ..................................................................................................................................9 5. POWER SPECTRAL DENSITY ...........................................................................................................................10 5.1 STANDARD APPLICABLE.......................................................................................................................................10 5.2 TEST PROCEDURE .................................................................................................................................................10 5.3 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................10 6. DTS BANDWIDTH .................................................................................................................................................12 6.1 STANDARD APPLICABLE.......................................................................................................................................12 6.2 TEST PROCEDURE .................................................................................................................................................12 6.3 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................12 7. RF OUTPUT POWER ............................................................................................................................................14 7.1 STANDARD APPLICABLE.......................................................................................................................................14 7.2 TEST PROCEDURE .................................................................................................................................................14 7.3 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................14 8. FIELD STRENGTH OF SPURIOUS EMISSIONS .............................................................................................16 8.1 STANDARD APPLICABLE.......................................................................................................................................16 8.2 TEST PROCEDURE .................................................................................................................................................16 8.3 CORRECTED AMPLITUDE & MARGIN CALCULATION ............................................................................................17 8.4 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................17 9. OUT OF BAND EMISSIONS .................................................................................................................................25 9.1 STANDARD APPLICABLE.......................................................................................................................................25 9.2 TEST PROCEDURE .................................................................................................................................................25 9.3 SUMMARY OF TEST RESULTS/PLOTS ....................................................................................................................26 Report No.: STR18108149I-5 Page 2 of 31 FCC Part 15.247

Model: TM-7PLUS 1. GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) Client Information Applicant: Shenzhen Inrico Electronics Co., LTD Address of applicant: 3/F, Building NO.118, High Tech Industrial Park, 72 Guowei Road, Luohu District, Shenzhen, China Manufacturer: Shenzhen Inrico Electronics Co., LTD Address of manufacturer: 3/F, Building NO.118, High Tech Industrial Park, 72 Guowei Road, Luohu District, Shenzhen, China General Description of EUT Product Name: Mobile Network Radio Brand Name: / Model No.: TM-7PLUS Adding Model(s): / Rated Voltage: DC12-36V Power Adapter: / Software Version: MRA58K Release-keys Hardware Version: H606 Note: The test data is gathered from a production sample, provided by the manufacturer. Technical Characteristics of EUT Bluetooth Version: V4.0 (BLE mode) Frequency Range: 2402-2480MHz RF Output Power: -0.82dBm (Conducted) Data Rate: 1Mbps Modulation: GFSK Quantity of Channels: 40 Channel Separation: 2MHz Type of Antenna: Integral Antenna Antenna Gain: 0.46dBi Report No.: STR18108149I-5 Page 3 of 31 FCC Part 15.247

Model: TM-7PLUS 1.2 Test Standards The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. 558074 D01 15.247 Meas Guidance v05: Guidance For Compliance Measurements On Digital Transmission System, Frequency Hopping Spread Spectrum System, And Hybrid System Devices Operating Under Section 15.247 Of The Fcc Rules ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices. Maintenance of compliance is the responsibility of the manufacturer. Any modification of the product, which result in lowering the emission, should be checked to ensure compliance has been maintained. 1.3 Test Methodology All measurements contained in this report were conducted with ANSI C63.10-2013, KDB 558074 D01 15.247 Meas Guidance v05 The equipment under test (EUT) was configured to measure its highest possible emission level. The test modes were adapted accordingly in reference to the Operating Instructions. 1.4 Test Facility FCC – Registration No.: 125990 Shenzhen SEM Test Technology Co., Ltd. Laboratory has been recognized to perform compliance testing on equipment subject to the Commissions Declaration Of Conformity (DOC). The Designation Number is CN5010, and Test Firm Registration Number is 125990. Industry Canada (IC) Registration No.: 11464A The 3m Semi-anechoic chamber of Shenzhen SEM Test Technology Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 11464A. Report No.: STR18108149I-5 Page 4 of 31 FCC Part 15.247

Meas: murpuus 1.5 EUT Setup and Test Mode "The EUT was aperated in the engineering mode tofr the n frequency that was for the purpose of the measarements Alltesingshallbe peformed under maxmum output pover condition, wilh a dity eycle equal to 100%,and to measure ts highest possible ermissions evel, more dexied desrition asfollows: ‘Test Mod Lt Testitode Desripion mm Low Tz micate Ts rign ‘Test Conditions Tempersie Relsive huriciy ATiM Proswe ET Cable List and Details Cable Deseripion Length (m) ShieldedUnstielded Wat / WihoutFerrite DC Caote 30 Unshicided Watn Ferie Hand Merophone Cable 2o Unshielded WihoutFerite Spocial Cable is and Dotaile Cable Deseripton Length (m) ShieldedUnstieided Witn / WihoutFevite use Cule to Sticked WihoutFerite ry Equipment Uist and Det Descripion Manufactrer Model Serial Number 7 7 7 7 1.6 Measurement Uncertainty Measurement unceriainty Pasmater Coodiions Uncersiny RF OulpatPover Conduceed soas Occupied Bendwidih Conduceed iss Power Speciral Densily Conduceed +iz Condicld Sporivus Emission Conduceed zue Conducked Emisions Conduceed S45000 t37000 oissowne £3309 30—2000He +4z08 02—ighe +5 sean Transmiter Spurious Emissions Retined Logk+2 s«a9 eecns 39000 TeyoNo: smrteOdrans Fagesorst Tecra sar

Model: TM-7PLUS 1.7 Test Equipment List and Details No. Description Manufacturer Model Serial No. Cal Date Due Date Spectrum SEMT-1072 Agilent E4407B MY41440400 2018-05-22 2019-05-21 Analyzer Spectrum Rohde & SEMT-1031 FSP30 836079/035 2018-05-22 2019-05-21 Analyzer Schwarz EMI Test Rohde & SEMT-1007 ESVB 825471/005 2018-05-22 2019-05-21 Receiver Schwarz SEMT-1008 Amplifier Agilent 8447F 3113A06717 2018-05-22 2019-05-21 SEMT-1043 Amplifier C&D PAP-1G18 2002 2018-05-22 2019-05-21 Broadband SEMT-1011 Schwarz beck VULB9163 9163-333 2017-06-08 2020-06-07 Antenna SEMT-1042 Horn Antenna ETS 3117 00086197 2017-06-08 2020-06-07 SEMT-1121 Horn Antenna Schwarzbeck BBHA 9170 BBHA9170582 2017-06-08 2020-06-07 SEMT-1069 Loop Antenna Schwarz beck FMZB 1516 9773 2017-06-08 2020-06-07 EMI Test Rohde & SEMT-1001 ESPI 101611 2018-05-22 2019-05-21 Receiver Schwarz SEMT-1003 L.I.S.N Schwarz beck NSLK8126 8126-224 2018-05-22 2019-05-21 Rohde & SEMT-1002 Pulse Limiter ESH3-Z2 100911 2018-05-22 2019-05-21 Schwarz Direction SEMT-1168 Pre-amplifier PAP-0126 14141-12838 2018-05-22 2019-05-21 Systems Inc. Direction SEMT-1169 Pre-amplifier PAP-2640 14145-14153 2018-05-22 2019-05-21 Systems Inc. Spectrum Rohde & SEMT-1163 FSP40 100612 2018-05-22 2019-05-21 Analyzer Schwarz DRG Horn A.H. SEMT-1170 SAS-574 571 2018-03-19 2021-03-18 Antenna SYSTEMS SEMT-1166 Power Limiter Agilent N9356B MY45450376 2018-05-22 2019-05-21 SEMT-1048 RF Limiter ATTEN AT-BSF-2400~2500 / 2018-05-22 2019-05-21 SEMT-1076 RF Switcher Top Precision RCS03-A2 / 2018-05-22 2019-05-21 SEMT-C001 Cable Zheng DI LL142-07-07-10M(A) / 2018-03-19 2019-03-18 SEMT-C002 Cable Zheng DI ZT40-2.92J-2.92J-6M / 2018-03-19 2019-03-18 SEMT-C003 Cable Zheng DI ZT40-2.92J-2.92J-2.5M / 2018-03-19 2019-03-18 SEMT-C004 Cable Zheng DI 2M0RFC / 2018-03-19 2019-03-18 SEMT-C005 Cable Zheng DI 1M0RFC / 2018-03-19 2019-03-18 SEMT-C006 Cable Zheng DI 1M0RFC / 2018-03-19 2019-03-18 Report No.: STR18108149I-5 Page 6 of 31 FCC Part 15.247

Meas: murpuus 2. SUMMARY OF TEST RESULTS FCC Rutes Description of Tst Hem Restt 321003 RF Exposure Conplian. $ m:foarman Anterns Requirement Congtion: 315205 Resticted Band of Operation Conplian. io Condicted Emission wa fuzame Power Speciral Densiy Gongtion: insrm® D7S Burdvidh Comgtion: inzmm®) RFOuipes Pover Complian: fusmm Racited Emisson Congtion: Eusn Bond Edge Outof Band Emissions) Congtion Nh not appleable ARemarkc The AC Line Conducled Emissians etingis exerpied because it is powered solely bybatefes. Thus, the AC LineConducted Enission esting is not applcable TeyoNo: smrteOdrans Fagerors: Tecra sar

Meas: murpuus 3. RF Exposure 3.1 Standard Applicable Accorting to § 1.1307 and. §2.1093,theportsle brinsmiter mustcomply the RFexposure requirements 32 Test Result "This prodict compled withtherequirementof the RF exsosure, leasesee the RE Exposure Report TeyoNo: smrteOdrans Fageoorsr Tecra sar

Model: TM-7PLUS 4. Antenna Requirement 4.1 Standard Applicable According to FCC Part 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. 4.2 Evaluation Information This product has an Integral antenna, fulfill the requirement of this section. Report No.: STR18108149I-5 Page 9 of 31 FCC Part 15.247

Meas: murpuus 5. Power Spectral Density 5.1 Standard Applicable Accortingto 15247(2)(D(i), Fordigtally modlted stems, the power specialdensity condictec from the intertional rdistr to the antennsshallnobe greserthin 8 dBm in any 3 Kite band during any time itervaof continuoss ransmision 52 Test Procedure Accortingto the KDB 553074 DO1 v05 Subcluse 84 and ANS1 C63.10—2013 Subclause L1.102, the tes imethod ol power spectrl density as below a) Set analyzercenter requencyto DTS channel center fequency b) Sethe span to 15 imes the DTS bandvcth o) SettheRBW io: 3itte © RBW < 100kt asenevw > 3 x ow ®) Drtector=peskc 6 Sweeptime =autocouple 2)Trace mode = max hok 1) Allow raceto fullystabilie 3 Use the peak markefction o determine the maximum amoftude fevel wihin the RBW 3) If measired valueexcerds mt reduce RBW (no fes than 3 kHs) and repent 53 Summmary of Test Results/Plots TestMoce TeChanel PoverSpectalDersiy aniton Low 2150 s GBKBL® midle 4s 28 8 High 4s3 s Hease refertothfllowing test plots TeyoNo: smrteOdrans Fageroors Techn Bar

Model: TM-7PLUS Low Middle High Report No.: STR18108149I-5 Page 11 of 31 FCC Part 15.247

Meas: murpuus 5. DTS Bandwidth 6.1 Standard Applicable Accorting to 15247(a)(2) Systems usingdigial modllon echrigques may aperate in he $02—928 MHe,2400~ 24835 Mi, and 5725—5850 MHe bands. The minimum 6B bandwicth shall b aeast 500 kite 62 Test Procedure Accorting to the KDB 588074 DOL vOS Subcluse 8.2 and ANSI C63.102013 Subelause I1.8. L thets method of DT3 Burdvidth asbelows 9 SecRBiy = 100 ie b)Setthevideo banduidih (VBW) > 3 x RBW ©) Drtector= Pesk 4)Trsce mode = mas hold ©) Sweep = sito couple 6 Allow the tnce to siiliee ) Measare the maximum width of temissionthati consrined bythe frequenclesassocited withthe o outermestamplitude poirts (upper and loverfrequencles) that e atlnuated by 6B refiiveto thereximum levelmeasaredinthe fundamentaemission 6.3 Summmary of Test Results/Plots Test Mode Test Chanrel 6 4B Bandwian Un ie ie tow Tess zsoo crskace) Miscle meen zsoo High Tess zsoo Hease refertothfllowing test plots TeyoNo: smrteOdrans Fageresr3n Techn Bar

Model: TM-7PLUS Low Middle High Report No.: STR18108149I-5 Page 13 of 31 FCC Part 15.247

Meas: murpuus 7. RF Output Power 7.1 Standard Applicable Accorting io 15.247(0(3) For systems using d tal medulation in he 902—928 MHs, 2400—2483.5 MHe, and 5725—5830 Mz bands: 1 Wai. 7.2TestProcedure Accorting to h KDB—532074 DO1 v05 Subelause 8.3.1. and ANS1 C63,10—2013 Subelause I1.9.L. . his procedire shall be used when he messurementinstumert hs availible a resoliionbandwicth that is grester than the ETS bandvicth a Serthe RBW 2 DTS bandwith bSevew = 3 x Rew €) Setspmn > 3x RBW 4) Sweeptime= auto couple: ) Detector= peal 9 Tesce mode= mhold 2)Allowirace to fily subilice 1 Use pelc madker functionto determine the peanplitde level 7.3 Summmary of Test Results/Plots HTest Mode TestChael Resting Ouiput Power Link aBm mw mw Low zis oie toco crsceue) Misdle ase oss toco High 52 oz toco TeyoNo: smrteOdrans Fage ror Techn Bar

Model: TM-7PLUS Low Middle High Report No.: STR18108149I-5 Page 15 of 31 FCC Part 15.247

Model: TM-7PLUS 8. Field Strength of Spurious Emissions 8.1 Standard Applicable According to §15.247(d), in any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in §15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in §15.209(a). The emission limit in this paragraph is based on measurement instrumentation employing an average detector. The provisions in §15.35 for limiting peak emissions apply. Spurious Radiated Emissions measurements starting below or at the lowest crystal frequency. 8.2 Test Procedure The setup of EUT is according with per ANSI C63.10-2013 measurement procedure. The specification used was with the FCC Part 15.205 15.247(a) and FCC Part 15.209 Limit. The external I/O cables were draped along the test table and formed a bundle 30 to 40 cm long in the middle. The spacing between the peripherals was 10 cm. Report No.: STR18108149I-5 Page 16 of 31 FCC Part 15.247

Model: TM-7PLUS Antenna Tower 1m-4m 3m EUT SYS 1.5m Turntable Table To EMI Receiver Ground Plane Frequency :9kHz-30MHz Frequency :30MHz-1GHz Frequency :Above 1GHz RBW=10KHz, RBW=120KHz, RBW=1MHz, VBW =30KHz VBW=300KHz VBW=3MHz(Peak), 10Hz(AV) Sweep time= Auto Sweep time= Auto Sweep time= Auto Trace = max hold Trace = max hold Trace = max hold Detector function = peak Detector function = peak, QP Detector function = peak, AV 8.3 Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and the Cable Factor, and subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows: Corr. Ampl. = Indicated Reading + Ant. Factor + Cable Loss – Ampl. Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of -6dBV means the emission is 6dBV below the maximum limit. The equation for margin calculation is as follows: Margin = Corr. Ampl. – FCC Part 15 Limit 8.4 Summary of Test Results/Plots Note: this EUT was tested in 3 orthogonal positions and the worst case position data was reported. Report No.: STR18108149I-5 Page 17 of 31 FCC Part 15.247

Model: TM-7PLUS  Spurious Emissions Below 1GHz Test Channel Low Polarity: Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 39.5757 29.62 -12.79 16.83 40.00 -23.17 55 100 peak 2 50.9420 27.12 -11.59 15.53 40.00 -24.47 111 100 peak 3 94.0979 27.34 -14.22 13.12 43.50 -30.38 72 100 peak 4 435.5898 28.32 -6.08 22.24 46.00 -23.76 94 100 peak 5 696.8567 28.30 -1.84 26.46 46.00 -19.54 290 100 peak 6 993.0114 26.86 2.12 28.98 54.00 -25.02 108 100 peak Report No.: STR18108149I-5 Page 18 of 31 FCC Part 15.247

Model: TM-7PLUS Test Channel Low Polarity: Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 39.5757 29.05 -12.79 16.26 40.00 -23.74 355 100 peak 2 55.8047 27.44 -12.31 15.13 40.00 -24.87 97 100 peak 3 107.1337 27.60 -13.58 14.02 43.50 -29.48 50 100 peak 4 173.8135 27.45 -16.01 11.44 43.50 -32.06 136 100 peak 5 528.2458 27.46 -4.96 22.50 46.00 -23.50 197 100 peak 6 875.2470 27.45 0.51 27.96 46.00 -18.04 278 100 peak Report No.: STR18108149I-5 Page 19 of 31 FCC Part 15.247

Model: TM-7PLUS Test Channel Middle Polarity: Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 43.6585 28.13 -12.08 16.05 40.00 -23.95 217 100 peak 2 51.8430 28.35 -11.59 16.76 40.00 -23.24 98 100 peak 3 90.5374 28.70 -13.51 15.19 43.50 -28.31 197 100 peak 4 300.3673 26.67 -8.15 18.52 46.00 -27.48 111 100 peak 5 572.6144 27.98 -4.10 23.88 46.00 -22.12 251 100 peak 6 982.6200 27.05 2.23 29.28 54.00 -24.72 276 100 peak Report No.: STR18108149I-5 Page 20 of 31 FCC Part 15.247

Model: TM-7PLUS Test Channel Middle Polarity: Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 56.9912 28.36 -12.75 15.61 40.00 -24.39 235 100 peak 2 112.5244 27.88 -14.35 13.53 43.50 -29.97 130 100 peak 3 208.5803 27.33 -13.10 14.23 43.50 -29.27 124 100 peak 4 411.8240 26.72 -6.45 20.27 46.00 -25.73 117 100 peak 5 706.6999 27.89 -1.81 26.08 46.00 -19.92 210 100 peak 6 935.5463 27.96 1.36 29.32 46.00 -16.68 273 100 peak Report No.: STR18108149I-5 Page 21 of 31 FCC Part 15.247

Model: TM-7PLUS Test Channel High Polarity: Horizontal No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 39.4372 29.03 -12.82 16.21 40.00 -23.79 318 100 peak 2 66.0342 27.01 -14.38 12.63 40.00 -27.37 198 100 peak 3 114.5146 26.48 -14.74 11.74 43.50 -31.76 54 100 peak 4 400.4319 27.56 -6.74 20.82 46.00 -25.18 295 100 peak 5 691.9867 27.85 -1.96 25.89 46.00 -20.11 203 100 peak 6 982.6200 27.96 2.23 30.19 54.00 -23.81 184 100 peak Report No.: STR18108149I-5 Page 22 of 31 FCC Part 15.247

Model: TM-7PLUS Test Channel High Polarity: Vertical No. Frequency Reading Correct Result Limit Margin Degree Height Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) ( ) (cm) 1 53.6932 27.61 -11.83 15.78 40.00 -24.22 335 100 peak 2 90.8554 27.70 -13.57 14.13 43.50 -29.37 91 100 peak 3 231.7179 25.63 -10.94 14.69 46.00 -31.31 152 100 peak 4 375.9385 26.58 -7.11 19.47 46.00 -26.53 92 100 peak 5 582.7425 28.25 -3.61 24.64 46.00 -21.36 56 100 peak 6 986.0717 27.14 2.16 29.30 54.00 -24.70 178 100 peak Report No.: STR18108149I-5 Page 23 of 31 FCC Part 15.247

Model: TM-7PLUS  Spurious Emissions Below 1GHz Frequency Reading Correct Result Limit Margin Polar Detector (MHz) (dBuV/m) dB (dBuV/m) (dBuV/m) (dB) H/V Low Channel-2402MHz 4804 61.98 -3.59 58.39 74 -15.61 H PK 4804 41.20 -3.59 37.61 54 -16.39 H AV 7206 59.18 -0.52 58.66 74 -15.34 H PK 7206 40.20 -0.52 39.68 54 -14.32 H AV 4804 60.21 -3.59 56.62 74 -17.38 V PK 4804 38.22 -3.59 34.63 54 -19.37 V AV 7206 60.91 -0.52 60.39 74 -13.61 V PK 7206 38.63 -0.52 38.11 54 -15.89 V AV Middle Channel-2440MHz 4880 57.74 -3.49 54.25 74 -19.75 H PK 4880 42.17 -3.49 38.68 54 -15.32 H AV 7320 61.20 -0.47 60.73 74 -13.27 H PK 7320 38.77 -0.47 38.30 54 -15.70 H AV 4880 60.78 -3.49 57.29 74 -16.71 V PK 4880 40.26 -3.49 36.77 54 -17.23 V AV 7320 59.60 -0.47 59.13 74 -14.87 V PK 7320 42.63 -0.47 42.16 54 -11.84 V AV High Channel-2480MHz 4960 59.62 -3.41 56.21 74 -17.79 H PK 4960 40.28 -3.41 36.87 54 -17.13 H AV 7440 60.33 -0.42 59.91 74 -14.09 H PK 7440 39.80 -0.42 39.38 54 -14.62 H AV 4960 60.35 -3.41 56.94 74 -17.06 V PK 4960 40.77 -3.41 37.36 54 -16.64 V AV 7440 60.69 -0.42 60.27 74 -13.73 V PK 7440 42.13 -0.42 41.71 54 -12.29 V AV Note: Testing is carried out with frequency rang 9kHz to the tenth harmonics, other than listed in the table above are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured. Report No.: STR18108149I-5 Page 24 of 31 FCC Part 15.247

Meas: murpuus 9. Out of Band Emissions 9.1 Standard Applicable Accorting to $15.247 (0) In any 100 kbandiweloutsite thfrequency band in which thespread spectrum or ighally modlated intentonal catoris operting, h radiofrequency power that s produced by theinentional rntiatrshllbea east20 B below thatin the 100 kHe bandvidth wihinthe band thacontsinsthe highesfevel of the desired power,based on ellhean RF conducled ora radinted messurement, provide the transmiter demonsiniescomplance withthe pesk conducted powerlimitsIfthetansmiter complies withthe condicted powerliits based on theuse of RMS averuging ove tminterva,as peritie under paragraph (BX2)of this section, e atlenuation reauired under his nragranh shallbe 0 B intead of 20 dB. Atenuation below the penerais specifec in §15.209(0) is norequired. In adtitin,radnted erissions which fall in theresicted bands,as defined in $15.205(s)must alsocomply with the radnted ermission imitsspecified in 315 2000) 9.2Test Procedure Accorting to the KDB 532074001 v05 Subelause 8. and ANST C3.10—2013 Subelause [L.LL, he Emissions in nonrestited requency bandstest method as llows a) Sthe center requency and span toencompassfrequency range to be measired b)Sethe RBW = 100 ktte qSame¥BW en x Rew 4) Detetor= peok ) Sweep im = auto couple D Trace mod= mas hokd ) Allow recetofilysiabilize 1) Use th peak marker fiction o determine the maximum ampltuce evel Accorting to the KDB 558074 DOL v05 Subelause 8.5 and ANST C63.10—2013 Subelause I1.12,the Emissions in resiriced requency bandstest method as llows A. Radited emision measurements Setspan = wite enough tocaptur the peak levelof he eniscion aperating on the channel elosestto e sardedge, as wellas any modlation productswhichfall outsideof heauthoried band of opertion (2310MHe o 24200z forlow bandedige 2480MHteto 2500M t fohe high bandedge) RBW = LitHe, VBW = TbiHe for pek value measured raw — wins, vew Ob foraverige value measured Sueep = tio; Detecior furetion =pesidaverige; Trsce= max hold All the brceto siabiiz, sethe matker on theerission ; the bandedge, oron the highest modltion product ouisideothe band. if is level is greaterthan that atthe bandedge. Enable the markendelis nction, hen se the markerto peak function o mave the matkerto thepeak ohe in—band emision.Those emission must comply wity h 15208 ino fllinthe restieted bands isxed in section 15.205, Note thathe method of measurement KDB publcstionnumber: 913391 may b used forthe edixied bandedge measurements TeyoNo: smrteOdrans Fagemsrsn Techn Bar

15. Meas: murreus B.. Anternscpor condicted messurments Peakervissionlevelsars measared by seting thnstnimentasfalows: 3) RBW as specified in Tabl 9/ svew > s x rew ©) Drtector= peak 4) Sweep ime auo ) Trice mode = max hold 0 Allow sueeps to cortinue until the trice stabfizes. (Note that the required measarement lime may be lengthened folow—duty:ezcle applications) Table 9—RBW as a function offrequency Freueney rew pie i ioone zonto snR 0 15 Miicto 30Mz Sigte is 1oigle Somee w ooo Mite Toiz to Toie >roo e Ihte If the pesicdetected ampltude can b shown to comply wth the averig mt then ts ot necessary io perform a separie average messurement Ensure that the amplitude of al unvanted emissions outside of the suirorized fiequency band (excluding resbictc fequency bands)anatenuated byatfeastthe minimurm requirement specified in section 8.1. Report thetiree highesemissionrelsive to thfinit 9.3 Summary of Test Results/Plots ReyonNo: smiorosmors Fascrsorst Techan san

Model: TM-7PLUS  Radiated test Test Channel Low Polarity: Horizontal (worst case) No. Frequency Reading Correct Result Limit Margin Remark (MHz) (dBuV/m) Factor(dB) (dBuV/m) (dBuV/m) (dB) 1 2310.000 40.65 -7.78 32.87 54.00 -21.13 Average Detector 2310.000 54.34 -7.78 46.56 74.00 -27.44 Peak Detector 2 2390.000 40.42 -7.32 33.10 54.00 -20.90 Average Detector 2390.000 53.91 -7.32 46.59 74.00 -27.41 Peak Detector 3 2402.000 71.79 -7.25 64.54 / / Average Detector 2402.300 93.14 -7.25 85.89 / / Peak Detector Report No.: STR18108149I-5 Page 27 of 31 FCC Part 15.247

Model: TM-7PLUS Test Channel High Polarity: Horizontal (worst case) No. Frequency Reading Correct Result Limit Margin Remark (MHz) (dBuV/m) dB/m (dBuV/m) (dBuV/m) (dB) 1 2480.000 73.40 -6.79 66.61 / / Average Detector 2480.200 95.81 -6.78 89.03 / / Peak Detector 2 2483.500 48.02 -6.77 41.25 54.00 -12.75 Average Detector 2483.500 59.15 -6.77 52.38 74.00 -21.62 Peak Detector 3 2500.000 39.55 -6.67 32.88 54.00 -21.12 Average Detector 2500.000 52.41 -6.67 45.74 74.00 -28.26 Peak Detector Report No.: STR18108149I-5 Page 28 of 31 FCC Part 15.247

Model: TM-7PLUS  Conducted test Low Report No.: STR18108149I-5 Page 29 of 31 FCC Part 15.247

Model: TM-7PLUS Middle Report No.: STR18108149I-5 Page 30 of 31 FCC Part 15.247

Model: TM-7PLUS High ***** END OF REPORT ***** Report No.: STR18108149I-5 Page 31 of 31 FCC Part 15.247


Document Created: 2019-01-28 14:09:28
Document Modified: 2019-01-28 14:09:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC