RF Test Report

FCC ID: 2AIRRINT116

Test Report

Download: PDF
FCCID_4199386

Test Report No.: RF190115N026 TEST REPORT Applicant International Toy, Inc. Address 2151 Michelson Drive STE 185, Irvine, California,United States 92612 Manufacturer or International Toy, Inc. Supplier Address 2151 Michelson Drive STE 185, Irvine, California,United States 92612 Product AN19 SITH HOLOCRON Brand Name Disney Model 400021017542 Additional Model & Model Difference N/A Date of tests Jan. 15, 2019 ~ Feb. 13, 2019 The submitted sample of the above equipment has been tested for according to the requirements of the following standards: FCC Part 15, Subpart C CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Tom Chen Approved by Glyn He Project Engineer / EMC Department Supervisor/ EMC Department Date: Feb. 28, 2019 This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 1 of 26 Report Version 1

Test Report No.: RF190115N026 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 3 1 SUMMARY OF TEST RESULTS ..................................................................................................... 4 2 MEASUREMENT UNCERTAINTY .................................................................................................. 4 3 GENERAL INFORMATION .............................................................................................................. 5 3.1 GENERAL DESCRIPTION OF EUT ......................................................................................... 5 3.2 DESCRIPTION OF TEST MODES ........................................................................................... 6 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS .......................................................... 6 3.4 DESCRIPTION OF SUPPORT UNITS ..................................................................................... 6 4 EMISSION TEST.............................................................................................................................. 7 4.1 CONDUCTED EMISSION MEASUREMENT ........................................................................... 7 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ................................................. 7 4.1.2 TEST INSTRUMENTS ....................................................................................................... 7 4.1.3 TEST PROCEDURE .......................................................................................................... 8 4.1.4 DEVIATION FROM TEST STANDARD ............................................................................. 8 4.1.5 TEST SETUP ..................................................................................................................... 9 4.1.6 EUT OPERATING CONDITIONS ...................................................................................... 9 4.1.7 TEST RESULTS .............................................................................................................. 10 4.2 RADIATED EMISSION MEASUREMENT .............................................................................. 12 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT .................................................... 12 4.2.2 TEST INSTRUMENTS ..................................................................................................... 13 4.2.3 TEST PROCEDURE ........................................................................................................ 14 4.2.4 DEVIATION FROM TEST STANDARD ........................................................................... 14 4.2.5 TEST SETUP ................................................................................................................... 15 4.2.6 EUT OPERATING CONDITIONS .................................................................................... 15 4.2.7 TEST RESULTS .............................................................................................................. 16 4.3. 20dB BANDWIDTH MEASUREMENT .................................................................................... 22 4.3.1 LIMITS OF 20dB BANDWIDTH MEASUREMENT .......................................................... 22 4.3.2 TEST INSTRUMENTS ..................................................................................................... 22 4.3.3 TEST PROCEDURE ........................................................................................................ 23 4.3.4 DEVIATION FROM TEST STANDARD ........................................................................... 23 4.3.5 TEST SETUP ................................................................................................................... 23 4.3.6 EUT OPERATING CONDITION ...................................................................................... 24 4.3.7 TEST RESULTS .............................................................................................................. 24 5 PHOTOGRAPHS OF THE TEST CONFIGURATION ................................................................... 25 6 APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB .................................................................................................................................. 26 No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 2 of 26 Report Version 1

Test Report No.: RF190115N026 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF190115N026 Original release Feb. 28, 2019 No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 3 of 26 Report Version 1

Test Report No.: RF190115N026 1 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C STANDARD TEST TYPE AND LIMIT RESULT REMARK SECTION §15.203 Antenna Requirement PASS No antenna connector is used. §15.207 AC Power Conducted Emission PASS Meet the requirement of limit. §15.209 Radiated Emission PASS Meet the requirement of limit. §15.215 (c) 20dB Bandwidth PASS Meet the requirement of limit. 2 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: MEASUREMENT FREQUENCY UNCERTAINTY Conducted emissions 9kHz~30MHz 2.70dB 9KHz ~ 30MHz 2.16dB Radiated emissions 30MHz ~ 1GMHz 4.04dB This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 4 of 26 Report Version 1

Test Report No.: RF190115N026 3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT AN19 SITH HOLOCRON MODEL NO. 400021017542 ADDITIONAL MODELS N/A FCC ID 2AIRRINT116 DC 3.7V from Li-ion Battery POWER SUPPLY Charging: DC 5V from USB Host Unit MODULATION TYPE AM OPERATING FREQUENCY 110KHz ~ 150KHz ANTENNA TYPE Coil Antenna with 0dBi CABLE SUPPLIED USB cable: Unshielded, detachable, 1m Max NOTES: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the user's manual. 2. For the test results, the EUT had been tested with all conditions. But only the worst case was shown in test report. 3. Please refer to the EUT photo document (Reference No.: 190115N026) for detailed product photo. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 5 of 26 Report Version 1

Test Report No.: RF190115N026 3.2 DESCRIPTION OF TEST MODES The EUT was tested under the following modes the final worst mode was marked in boldface and recorded in this report. TEST FREQUENCY TEST MODE TEST VOLTAGE 110 - 150KHz Transmiting+Charging DC 5V from Adapter 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. 3.4 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID 1 Adapter Apple A1443 N/A N/A 2 Adapter InFocus C5010-C08N N/A N/A NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS 1-2 N/A No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 6 of 26 Report Version 1

Test Report No.: RF190115N026 4 EMISSION TEST 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT Class A (dBuV) Class B (dBuV) FREQUENCY (MHz) Quasi-peak Average Quasi-peak Average 0.15 - 0.5 79 66 66 - 56 56 - 46 0.50 - 5.0 73 60 56 46 5.0 - 30.0 73 60 60 50 NOTES: (1) The lower limit shall apply at the transition frequencies. (2) The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. (3) All emanations from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. 4.1.2 TEST INSTRUMENTS Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. EMI Test Receiver Rohde&Schwarz ESR7 101494 Mar. 21,18 Mar. 20,19 Artificial Mains Rohde&Schwarz ENV216 101173 Mar. 03,18 Mar. 02,19 Network Artificial Mains Rohde&Schwarz ESH3-Z5 100317 Apr. 11,18 Apr. 10,19 Network TK Voltage probe SCHWARZBECK TK 9421 Jan. 17,19 Jan. 16,20 9421-176 ADT_Cond_ Test software ADT N/A N/A N/A V7.3.7 NOTES: 1. The test was performed in shielded room 553. 2. The calibration interval of the above test instruments is 12 months. And the calibrations are traceable to CEPREI/CHINA, GRGT/CHINA and NIM/CHINA. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 7 of 26 Report Version 1

Test Report No.: RF190115N026 4.1.3 TEST PROCEDURE The basic test procedure was in accordance with ANSI C63.4:2014 (section 7). a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150 kHz to 30 MHz was searched. Emission levels under (Limit – 20dB) were not recorded. NOTES: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value 4.1.4 DEVIATION FROM TEST STANDARD No deviation. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 8 of 26 Report Version 1

Test Report No.: RF190115N026 4.1.5 TEST SETUP V e r t ic a l G r o u n d R e f e r e n c e P la n e T e s t R e c e iv e r EUT 40cm 80cm L IS N H o r iz o n t a l G r o u n d R e f e r e n c e P la n e N o t e : 1 .S u p p o r t u n it s w e r e c o n n e c t e d t o s e c o n d L IS N . 2 .B o t h o f L IS N s ( A M N ) a r e 8 0 c m f r o m E U T a n d a t le a s t 8 0 c m f r o m o t h e r u n it s a n d o t h e r m e t a l p la n e s s u p p o r t u n it s . 4.1.6 EUT OPERATING CONDITIONS a. Turned on the power of all equipment. b. EUT was operated according to the type description in manufacturer’s specifications or the User's Manual. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 9 of 26 Report Version 1

Test Report No.: RF190115N026 4.1.7 TEST RESULTS TEST MODE Transmiting+Charging 6DB BANDWIDTH 9 kHz DC 5V from Adapter Input TEST VOLTAGE PHASE Line (L) AC 120V 60Hz ENVIRONMENTAL 25deg.C, 55% RH TESTED BY Dragon CONDITIONS Emission Freq. Corr. Reading Value Limit Margin Level No. Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.18856 10.03 14.52 4.07 24.55 14.10 64.10 54.10 -39.55 -40.00 2 0.74424 10.13 9.69 5.90 19.82 16.03 56.00 46.00 -36.18 -29.97 3 2.53380 9.97 1.99 -2.62 11.96 7.35 56.00 46.00 -44.04 -38.65 4 3.59475 9.76 4.56 -2.53 14.32 7.23 56.00 46.00 -41.68 -38.77 5 4.50557 10.02 4.97 -1.66 14.99 8.36 56.00 46.00 -41.01 -37.64 6 16.78875 9.92 9.08 4.57 19.00 14.49 60.00 50.00 -41.00 -35.51 REMARK: The emission levels of other frequencies were very low against the limit. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 10 of 26 Report Version 1

Test Report No.: RF190115N026 TEST MODE Transmiting+Charging 6DB BANDWIDTH 9 kHz DC 5V from Adapter Input TEST VOLTAGE PHASE Neutral (N) AC 120V 60Hz ENVIRONMENTAL 25deg.C, 55% RH TESTED BY Dragon CONDITIONS Emission Freq. Corr. Reading Value Limit Margin Level No. Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.16524 10.18 13.52 1.00 23.70 11.18 65.20 55.20 -41.50 -44.02 2 0.70970 10.02 6.67 -0.73 16.69 9.29 56.00 46.00 -39.31 -36.71 3 1.57425 9.98 1.43 -3.11 11.41 6.87 56.00 46.00 -44.59 -39.13 4 2.43150 9.85 0.26 -3.25 10.11 6.60 56.00 46.00 -45.89 -39.40 5 4.47002 9.73 5.39 -0.39 15.12 9.34 56.00 46.00 -40.88 -36.66 6 16.51425 9.85 6.44 3.98 16.29 13.83 60.00 50.00 -43.71 -36.17 REMARK: The emission levels of other frequencies were very low against the limit. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 11 of 26 Report Version 1

Test Report No.: RF190115N026 4.2 RADIATED EMISSION MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT TEST STANDARD: FCC Part 15, Subpart C, Section 15.209 Emissions radiated outside of the specified bands, shall be according to the general radiated limits as following: FREQUENCIES FIELD STRENGTH MEASUREMENT DISTANCE (MHz) (microvolts/meter) (meters) 0.009 – 0.490 2400/F(kHz) 300 0.490 – 1.705 24000/F(kHz) 30 1.705 – 30.0 30 30 30 – 88 100 3 88 – 216 150 3 216 - 960 200 3 Above 960 500 3 NOTES: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. As shown in 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. 4. The measured field strength was extrapolated to distance 30 meters, using the formula that the limit of field strength varies as the inverse distance square (40dB per decade of distance) Example: 13.56MHz = 15848uV/m 30m = 84dBuV/m 30m = 84+20log(30/3)2 3m = 124dBuV/m No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 12 of 26 Report Version 1

Test Report No.: RF190115N026 4.2.2 TEST INSTRUMENTS FREQUENCY 9KHz-30MHz Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. EMI Test Receiver Rohde&Schwarz ESR7 101564 Jan. 18,19 Jan. 17,20 Active Loop SCHWARZBECK FMZB 1519B 1519B-045 May 04,18 May 03,19 Antenna Amplifier Burgeon BPA-530 100210 Apr. 18,18 Apr. 18,19 ADT_Radiated Test Software ADT N/A N/A N/A _V8.7.07 NOTES: 1. The test was performed in 10m Chamber. 2. The calibration interval of the above test instruments is 12 months. And the calibrations are traceable to CEPREI/CHINA, GRGT/CHINA and NIM/CHINA. 3. The FCC Site Registration No. is 749762. FREQUENCY 30MHz-1GHz Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. EMI Test Receiver Rohde&Schwarz ESU40 100449 Mar. 21,18 Mar. 20,19 Bilog Antenna Teseq CBL 6111D 30643 Aug.11,18 Aug. 10,19 Amplifier Burgeon BPA-530 100220 Apr. 18,18 Apr. 18,19 3m Semi-anechoic ETS-LINDGREN 9m*6m*6m NSEMC003 Feb. 10,19 Feb. 09,20 Chamber ADT_Radiated Test software ADT N/A N/A N/A _V7.6.15.9.2 NOTES: 1. The test was performed in 966 Chamber 2. The calibration interval of the above test instruments is 12 months. And the calibrations are traceable to CEPREI/CHINA, GRGT/CHINA and NIM/CHINA. 3. The FCC Site Registration No. is 749762. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 13 of 26 Report Version 1

Test Report No.: RF190115N026 4.2.3 TEST PROCEDURE < Below 30MHz > a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 10 meters Semi-anechoic chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. For below 30MHz, a loop antenna with its vertical plane is place 3m from the EUT and rotated about its vertical axis for maximum response at each azimuth about the EUT. And the centre of the loop shall be 1m above the ground. <30MHz~1GHz > a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meters semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. NOTES: 1. The resolution bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 3. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 4. Margin value = Emission level – Limit value. 4.2.4 DEVIATION FROM TEST STANDARD No deviation. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 14 of 26 Report Version 1

Test Report No.: RF190115N026 4.2.5 TEST SETUP Below 30MHz test setup Below 1GHz test setup Ant. Tower 1-4m 3m EUT Turn Table 0.8m Ground Plane Spectrum Note: For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT OPERATING CONDITIONS a. Turn on the power supply of the EUT. b. EUT was operated according to the type description in manufacturer’s specifications or the User's Manual. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 15 of 26 Report Version 1

Test Report No.: RF190115N026 4.2.7 TEST RESULTS FREQUENCY TEST MODE Transmiting+Charging 9 -150KHz RANGE DETECTOR DC 5V from Adapter Input FUNCTION & TEST VOLTAGE Quasi-Peak, 200Hz AC 120V 60Hz RESOLUTION BANDWIDTH ENVIRONMENTAL 21deg. C, 67% RH TESTED BY: Vincent CONDITIONS ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3M Correction Raw Emission Antenna Table No Freq. Limit Margin Factor Value Level Height Angle . (MHz) (dBuV/m) (dB) (dB/m) (dBuV) (dBuV/m) (cm) (Degree) 1 0.035 -11.08 50.11 39.03 116.66 -77.63 100 257 2 0.056 -11.42 36.99 25.57 112.65 -87.08 100 69 3 0.064 -11.40 38.96 27.56 111.44 -83.88 100 112 4 0.072 -11.38 34.02 22.64 110.50 -87.86 100 223 5 0.112 -11.29 26.58 15.29 106.63 -91.34 100 233 6 0.129 -11.25 31.13 19.88 105.42 -85.54 100 29 REMARKS: 1. Peak detector quick scan is showed on the graph and final quasi-peak detector data is measured corresponding to relevant limit and recorded in the data table. 2. Negative sign (-) in the margin column signify levels below the limit. 3. Frequency range scanned: 0.009-0.15MHz. 4. Only emissions significantly above equipment noise floor are reported. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 16 of 26 Report Version 1

Test Report No.: RF190115N026 FREQUENCY TEST MODE Transmiting+Charging 9 -150KHz RANGE DETECTOR DC 5V from Adapter FUNCTION & TEST VOLTAGE Quasi-Peak, 200Hz Input AC 120V 60Hz RESOLUTION BANDWIDTH ENVIRONMENTAL 21deg. C, 67% RH TESTED BY: Vincent CONDITIONS ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3M Correction Raw Emission Antenna Table No Freq. Limit Margin Factor Value Level Height Angle . (MHz) (dBuV/m) (dB) (dB/m) (dBuV) (dBuV/m) (cm) (Degree) 1 0.035 -11.08 49.08 38.00 116.66 -78.66 100 290 2 0.056 -11.42 36.01 24.59 112.65 -88.06 100 352 3 0.064 -11.40 37.89 26.49 111.44 -84.95 100 343 4 0.072 -11.38 32.72 21.34 110.51 -89.17 100 360 5 0.112 -11.29 24.85 13.56 106.63 -93.07 100 278 6 0.129 -11.25 29.77 18.52 105.42 -86.90 100 356 REMARKS: 1. Peak detector quick scan is showed on the graph and final quasi-peak detector data is measured corresponding to relevant limit and recorded in the data table. 2. Negative sign (-) in the margin column signify levels below the limit. 3. Frequency range scanned: 0.009-0.15MHz. 4. Only emissions significantly above equipment noise floor are reported. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 17 of 26 Report Version 1

Test Report No.: RF190115N026 FREQUENCY TEST MODE Transmiting+Charging 150KHz-30MHz RANGE DETECTOR DC 5V from Adapter FUNCTION & TEST VOLTAGE Quasi-Peak, 200Hz Input AC 120V 60Hz RESOLUTION BANDWIDTH ENVIRONMENTAL 21deg. C, 67% RH TESTED BY: Vincent CONDITIONS ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3M Correction Raw Emission Antenna Table No Freq. Limit Margin Factor Value Level Height Angle . (MHz) (dBuV/m) (dB) (dB/m) (dBuV) (dBuV/m) (cm) (Degree) 1 0.277 -11.14 40.26 29.12 98.76 -69.64 100 43 2 1.111 -10.92 23.27 12.35 67.34 -54.99 100 104 3 3.428 -10.70 22.91 12.21 69.54 -57.33 100 299 4 4.443 -10.67 26.46 15.79 69.54 -53.75 100 227 5 12.223 -10.66 21.21 10.55 69.54 -58.99 100 246 6 18.888 -10.24 20.15 9.91 69.54 -59.63 100 112 REMARKS: 1. Peak detector quick scan is showed on the graph and final quasi-peak detector data is measured corresponding to relevant limit and recorded in the data table. 2. Negative sign (-) in the margin column signify levels below the limit. 3. Frequency range scanned: 0.15-30MHz. 4. Only emissions significantly above equipment noise floor are reported. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 18 of 26 Report Version 1

Test Report No.: RF190115N026 FREQUENCY TEST MODE Transmiting+Charging 150KHz-30MHz RANGE DETECTOR DC 5V from Adapter FUNCTION & TEST VOLTAGE Quasi-Peak, 200Hz Input AC 120V 60Hz RESOLUTION BANDWIDTH ENVIRONMENTAL 21deg. C, 67% RH TESTED BY: Vincent CONDITIONS ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3M Correction Raw Emission Antenna Table No Freq. Limit Margin Factor Value Level Height Angle . (MHz) (dBuV/m) (dB) (dB/m) (dBuV) (dBuV/m) (cm) (Degree) 1 0.277 -11.14 40.27 29.13 98.76 -69.63 100 86 2 0.832 -10.86 24.07 13.21 69.63 -56.42 100 199 3 3.332 -10.72 22.79 12.07 69.54 -57.47 100 228 4 4.444 -10.67 26.14 15.47 69.54 -54.07 100 324 5 13.715 -10.74 21.03 10.29 69.54 -59.25 100 254 6 19.428 -10.15 20.21 10.06 69.54 -59.48 100 34 REMARKS: 1. Peak detector quick scan is showed on the graph and final quasi-peak detector data is measured corresponding to relevant limit and recorded in the data table. 2. Negative sign (-) in the margin column signify levels below the limit. 3. Frequency range scanned: 0.15-30MHz 4. Only emissions significantly above equipment noise floor are reported. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 19 of 26 Report Version 1

Test Report No.: RF190115N026 FREQUENCY TEST MODE Transmiting+Charging 30-1000MHz RANGE DETECTOR DC 5V from Adapter Input FUNCTION & TEST VOLTAGE Quasi-Peak, 120kHz AC 120V 60Hz RESOLUTION BANDWIDTH ENVIRONMENTAL 23deg. C, 55% RH TESTED BY: Tank CONDITIONS ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3M Correction Raw Emission Antenna Table Freq. Limit Margin No. Factor Value Level Height Angle (MHz) (dBuV/m) (dB) (dB/m) (dBuV) (dBuV/m) (cm) (Degree) 1 30.000 -10.13 39.34 29.21 40.00 -10.79 200 0 2 93.740 -18.99 37.43 18.44 43.50 -25.06 200 0 3 183.810 -17.76 54.90 37.14 43.50 -6.36 200 0 4 286.360 -13.41 48.29 34.88 46.00 -11.12 200 0 5 350.100 -10.67 38.44 27.77 46.00 -18.23 200 0 6 631.400 -4.98 30.24 25.26 46.00 -20.74 200 0 REMARKS: 1. Peak detector quick scan is showed on the graph and final quasi-peak detector data is measured corresponding to relevant limit and recorded in the data table. 2. Negative sign (-) in the margin column signify levels below the limit. 3. Frequency range scanned: 30MHz to 1000MHz. 4. Only emissions significantly above equipment noise floor are reported. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 20 of 26 Report Version 1

Test Report No.: RF190115N026 FREQUENCY TEST MODE Transmiting+Charging 30-1000MHz RANGE DETECTOR DC 5V from Adapter Input FUNCTION & TEST VOLTAGE Quasi-Peak, 120kHz AC 120V 60Hz RESOLUTION BANDWIDTH ENVIRONMENTAL 21deg. C, 67% RH TESTED BY: Tank CONDITIONS ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3M Correction Raw Emission Antenna Table Freq. Limit Margin No. Factor Value Level Height Angle (MHz) (dBuV/m) (dB) (dB/m) (dBuV) (dBuV/m) (cm) (Degree) 1 36.930 -14.01 43.43 29.42 40.00 -10.58 100 0 2 92.360 -19.19 41.01 21.82 43.50 -21.68 100 0 3 203.210 -17.95 43.16 25.21 43.50 -18.29 100 0 4 308.530 -12.37 34.77 22.40 46.00 -23.60 100 0 5 361.190 -10.34 34.03 23.69 46.00 -22.31 100 0 6 954.270 -0.28 34.14 33.86 46.00 -12.14 100 0 REMARKS: 1. Peak detector quick scan is showed on the graph and final quasi-peak detector data is measured corresponding to relevant limit and recorded in the data table. 2. Negative sign (-) in the margin column signify levels below the limit. 3. Frequency range scanned: 30MHz to 1000MHz. 4. Only emissions significantly above equipment noise floor are reported. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 21 of 26 Report Version 1

Test Report No.: RF190115N026 4.3. 20dB BANDWIDTH MEASUREMENT 4.3.1 LIMITS OF 20dB BANDWIDTH MEASUREMENT The field strength of any emissions appearing between the band edges and out of band shall be attenuated at least 20 dB below the level of the unmodulated carrier or to the general limits in Section 15.209. 4.3.2 TEST INSTRUMENTS Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. Power Sensor Keysight U2021XA MY55060016 Jun. 13,18 Jun. 12,19 Power Sensor Keysight U2021XA MY55060018 Jun. 13,18 Jun. 12,19 Power Meter Anritsu ML2495A 1139001 Apr. 13,18 Apr. 13,19 Power Sensor Anritsu MA2411B 1531155 Apr. 13,18 Apr. 13,19 Digital Multimeter FLUKE 15B A1220010DG Oct. 17, 18 Oct.16, 19 Humid & Temp Haida HD-2257 110807201 Sep.20,18 Sep. 19,19 Programmable Tester Oscilloscope Agilent DSO9254A MY51260160 Nov. 08,18 Nov. 07,19 Signal Analyzer Rohde & Schwarz FSV7 102331 Nov. 04,18 Nov. 03,19 Signal Generator Agilent N5183A MY50140980 Jan. 02, 19 Jan. 01, 20 Agile Signal Agilent 8645A Agilent Oct. 27, 18 Oct. 26, 19 Generator Spectrum Analyzer Keysight N9020A MY55400499 Mar. 21,18 Mar. 20,19 MXG-B RF Vector Keysight N5182B MY56200288 Jan. 02, 19 Jan. 01, 20 Signal Generator BLUETOOTH Rohde&Schwarz CBT32 100811 Jul. 06, 18 Jul. 05, 19 TESTER Attenuator MINI BW-S10W2+ S130129FGE2 N/A N/A DC Source Keysight E3642A MY56146098 N/A N/A NOTES: 1. The test was performed in RF Oven room. 2. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to CEPREI/CHINA, GRGT/CHINA and NIM/CHINA. No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 22 of 26 Report Version 1

Test Report No.: RF190115N026 4.3.3 TEST PROCEDURE a. Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. b. Turn on the EUT and connect it to measurement instrument. Then set it to any one convenient frequency within its operating range. Set a reference level on the measuring instrument equal to the highest peak value. c. Measure the frequency difference of two frequencies that were attenuated 20dB from the reference level. Record the frequency difference as the emission bandwidth. d. Repeat above procedures until all frequencies measured were complete. 4.3.4 DEVIATION FROM TEST STANDARD No deviation. 4.3.5 TEST SETUP EUT SPECTRUM ANALYZER 10dB ATTENUATION PAD No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 23 of 26 Report Version 1

Test Report No.: RF190115N026 4.3.6 EUT OPERATING CONDITION a. Turn on the EUT. b. The EUT tested in Transmiting mode respectively. 4.3.7 TEST RESULTS TEST MODE CHANNEL FREQUENCY (KHz) 20dB BANDWIDTH (Hz) Transmiting+Charging 121.9204 792.0 Lower & Upper Test Frequency Point Test Frequency P/F (MHz) (KHz) Lower 121.5412 PASS Upper 122.3332 PASS Test Data: No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 24 of 26 Report Version 1

Test Report No.: RF190115N026 5 PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 25 of 26 Report Version 1

Test Report No.: RF190115N026 6 APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications were made to the EUT by the lab during the test. ---END--- No. 34, Chenwulu Section, Guantai Rd., Houjie Tel: +86 769 8998 2098 Bureau Veritas Shenzhen Co., Ltd. Town, Dongguan City, Fax: +86 769 8593 1080 Dongguan Branch Guangdong 523942, China Email: customerservice.dg@cn.bureauveritas.com Page 26 of 26 Report Version 1


Document Created: 2019-03-13 09:53:15
Document Modified: 2019-03-13 09:53:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC