RF exposure-3_Annex C Plots of System Performance Check

FCC ID: 2AIOHDT0706W08

RF Exposure Info

Download: PDF
FCCID_4061353

REPORT No.：SZ18100034S01 Annex C Plots of System Performance Check NOTE: This document is issued by MORLAB, the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. Tel: 86-755-36698555 Fax: 86-755-36698525 MORLAB FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Http://www.morlab.cn E-mail: service@morlab.cn

Test Laboratory: SAR Lab. of Shenzhen Morlab Communications Technology Co., Ltd. Date: 2018.10.20 System Check_2450MHz_Body_181020 Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: MSL_2450_181020 Medium parameters used: f = 2450 MHz; σ = 2.014 S/m; εr = 50.597; ρ = 1000 kg/m3 Ambient Temperature：23.7 ℃; Liquid Temperature：22.1 ℃ DASY5 Configuration: - Probe: ES3DV3 - SN3154; ConvF(4.28, 4.28, 4.28); Calibrated: 2017.10.30; - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1516; Calibrated: 2018.07.14 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7331) CW 2450/Area Scan (101x101x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 13.64 W/kg CW 2450/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 112.54 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 26.41 W/kg SAR(1 g) = 13.24 W/kg; SAR(10 g) = 6.17 W/kg Maximum value of SAR (measured) = 20.41 W/kg 0 dB = 20.41 W/kg


Document Created: 2018-11-01 11:51:13
Document Modified: 2018-11-01 11:51:13
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC