2AIMRMITVMDZ22AB_FCC Part 1.1307 MPE REPORT

FCC ID: 2AIMRMITVMDZ22AB

RF Exposure Info

Download: PDF
FCCID_3904533

Uni#+nTrust Page 1 of 13 Report No.: 180320001RFC—5 FCC RF EXPOSURE EVALUATION REPORT Product Name: MI BOX Trade Mark: MI Model No.: MDZ—22—AB Report Number: 180320001RFC—5 Test Standards: FCC 47 CFR Part 1 Subpart I FCC ID: 2AIMRMITVMDZ22AB Test Result: PASS Date of Issue: June 22, 2018 Prepared for: Beijing Xiaomi Electronics Co.,Ltd Room 707,7F;,Building 5,No 58,JinghaiWulu Road Beijing economic & Technological Development Zone, Beijing, China Prepared by: Shenzhen UnionTrust Quality and Technology Co., Ltd. 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China TEL: +86—755—2823 0888 FAX: +86—755—2823 0886 Tested by: 76’-1/\ Henr)" Lu |a Reviewed by: — WLiang Projec,t ] gineer Assistant Manager Approved by: Date: Billy Li Technical Director Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86—755—28230888 Fax: +86—755—28230886 E—mail: infoQ@uttlab.com Hitp:/www.uttlab.com

Page 2 of 13 Report No.: 180320001RFC-5 Version Version No. Date Description V1.0 June 22, 2018 Original Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 3 of 13 Report No.: 180320001RFC-5 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 4 1.4 OTHER INFORMATION ......................................................................................................................................... 6 1.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................................................... 7 1.6 TEST LOCATION ................................................................................................................................................. 7 1.7 TEST FACILITY ................................................................................................................................................... 8 1.8 DEVIATION FROM STANDARDS ............................................................................................................................ 8 1.9 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 8 1.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 8 2. EQUIPMENT LIST .................................................................................................................................................... 8 3. MPE EVALUATION ................................................................................................................................................... 9 3.1 REFERENCE DOCUMENTS FOR EVALUATION ........................................................................................................ 9 3.2 MPE COMPLIANCE REQUIREMENT ..................................................................................................................... 9 3.2.1 LIMITS ................................................................................................................................................... 9 3.2.2 TEST PROCEDURE ................................................................................................................................. 9 3.3 MPE CALCULATION METHOD ............................................................................................................................. 9 3.4 MPE CALCULATION RESULTS .......................................................................................................................... 10 3.4.1 FOR WLAN ......................................................................................................................................... 10 3.4.2 FOR BT ............................................................................................................................................... 12 3.4.3 SIMULTANEOUS MULTI-BAND TRANSMISSION MPE ANALYSIS .................................................................. 12 APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS ................................................................................. 13 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 4 of 13 Report No.: 180320001RFC-5 1. GENERAL INFORMATION 1.1 CLIENT INFORMATION Applicant: Beijing Xiaomi Electronics Co.,Ltd Room 707,7F,Building 5,No 58,JinghaiWulu Road Beijing economic & Address of Applicant: Technological Development Zone, Beijing, China Manufacturer: Beijing Xiaomi Electronics Co.,Ltd Room 707,7F,Building 5,No 58,JinghaiWulu Road Beijing economic & Address of Manufacturer: Technological Development Zone, Beijing, China 1.2 EUT INFORMATION Product Name: MI BOX Model No.: MDZ-22-AB Add. Model No.: MDZ-22-AC, MDZ-22-AD, MDZ-22-AE, MDZ-22-AF (See Note 1) Trade Mark: MI DUT Stage: Identical Prototype IEEE 802.11b/g/n 2.4 GHz ISM Band: Bluetooth: V4.0 5 150 MHz to 5 250 MHz IEEE 802.11a/n/ac EUT Supports Function: 5 250 MHz to 5 350 MHz IEEE 802.11a/n/ac 5 GHz U-NII Bands: 5 470 MHz to 5 725 MHz IEEE 802.11a/n/ac 5 725 MHz to 5 850 MHz IEEE 802.11a/n/ac Sample Received Date: May 9, 2018 Sample Tested Date: May 18, 2018 to May 31, 2018 Note 1: The additional model MDZ-22-AC, MDZ-22-AD, MDZ-22-AE, MDZ-22-AF is identical with the test model MDZ-22-AB except the model number for marketing purpose. 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD For BT_LE Frequency Band: 2400 MHz to 2483.5 MHz Bluetooth Version: Bluetooth LE Type of Modulation: GFSK Number of Channels: 40 Channel Separation: 2 MHz Antenna Type: PCB Antenna Antenna Gain: 1.5 dBi Maximum Peak Power: 8.29 dBm For BT_EDR Frequency Band: 2400 MHz to 2483.5 MHz Bluetooth Version: Bluetooth EDR Modulation Technique: Frequency Hopping Spread Spectrum(FHSS) Type of Modulation: GFSK, π/4DQPSK, 8DPSK Number of Channels: 79 Channel Separation: 1 MHz Antenna Type: PCB Antenna Antenna Gain: 1.5 dBi Maximum Peak Power: 10.70 dBm Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 5 of 13 Report No.: 180320001RFC-5 For 2.4 GHz ISM Band of Wi-Fi Frequency Band: 2400 MHz to 2483.5 MHz Support Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n-HT20, IEEE 802.11n-HT40 IEEE 802.11b: DSSS(CCK, DQPSK, DBPSK) IEEE 802.11g: OFDM(64QAM, 16QAM, QPSK, BPSK) Type of Modulation: IEEE 802.11n-HT20: OFDM(64QAM, 16QAM, QPSK, BPSK) IEEE 802.11n-HT40: OFDM(64QAM, 16QAM, QPSK, BPSK) IEEE 802.11b: Up to 11 Mbps IEEE 802.11g: Up to 54 Mbps Data Rate: IEEE 802.11n-HT20: Up to MCS7 IEEE 802.11n-HT40: Up to MCS7 IEEE 802.11b: 11 IEEE 802.11g: 11 Number of Channels: IEEE 802.11n-HT20: 11 IEEE 802.11n-HT40: 7 Channel Separation: 5 MHz Antenna Type: PCB Antenna Antenna Gain: 1.5 dBi IEEE 802.11b: 18.92 dBm IEEE 802.11g: 24.62 dBm Maximum Peak Power: IEEE 802.11n-HT20: 22.37 dBm IEEE 802.11n-HT40: 20.43 dBm For 5 GHz U-NII Bands of Wi-Fi 5150 MHz to 5250 MHz 5250 MHz to 5350 MHz Frequency Band: 5470 MHz to 5725 MHz 5 725 MHz to 5 850 MHz Support Standards: IEEE 802.11a/n/ac TPC Function: Not Support DFS Operational mode: Slave without radar Interference detection function IEEE 802.11a: OFDM(64QAM, 16QAM, QPSK, BPSK) Type of Modulation: IEEE 802.11n: OFDM(64QAM, 16QAM, QPSK, BPSK) IEEE 802.11ac: OFDM(256QAM, 64QAM, 16QAM, QPSK, BPSK) IEEE 802.11a/n-HT20/ac-VHT20: 20 MHz Channel Spacing: IEEE 802.11n-HT40/ac-VHT40: 40 MHz IEEE 802.11ac-VHT80: 80 MHz IEEE 802.11a: Up to 54 Mbps IEEE 802.11n-HT20: Up to MCS7 IEEE 802.11n-HT40: Up to MCS7 Data Rate: IEEE 802.11ac-VHT20: Up to MCS8 IEEE 802.11ac-VHT40: Up to MCS9 IEEE 802.11ac-VHT80: Up to MCS9 5150 MHz to 5250 MHz: 4 for IEEE 802.11a/n-HT20/ac-VHT20 2 for IEEE 802.11n-HT40)/ac-VHT40 1 for IEEE 802.11acVHT80 Number of Channels: 5250 MHz to 5350 MHz: 4 for IEEE 802.11a/n-HT20/ac-VHT20 2 for IEEE 802.11n-HT40/ac-VHT40 1 for IEEE 802.11acVHT80 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 6 of 13 Report No.: 180320001RFC-5 5470 MHz to 5725 MHz: 11 for IEEE 802.11a/n-HT20/ac-VHT20 5 for IEEE 802.11n-HT40/ac-VHT40 2 for IEEE 802.11ac-VHT80 5725 MHz to 5850 MHz: 5 for IEEE 802.11a/n-HT20/ac-VHT20 2 for IEEE 802.11n-HT40/ac-VHT40 1 for IEEE 802.11ac-VHT80 Antenna Type: PCB Antenna 5150 MHz to 5250 MHz: 1.9 dBi 5250 MHz to 5350 MHz: 1.9 dBi Antenna Gain: 5470 MHz to 5725 MHz: 1.9 dBi 5725 MHz to 5850 MHz: 1.9 dBi Mode U-NII-1 U-NII-2A U-NII-2C U-NII-3 IEEE 802.11a: 12.64 13.21 11.74 11.64 Max. Avg. Power (dBm): IEEE 802.11n-HT20: 11.75 11.75 11.67 10.78 IEEE 802.11n-HT40: 7.98 7.95 7.69 7.79 IEEE 802.11ac-VHT80: 8.38 8.62 8.59 8.47 1.4 OTHER INFORMATION Test channels for BT_LE Type of Modulation Tx/Rx Frequency Test RF Channel Lists Lowest(L) Middle(M) Highest(H) GFSK 2402 MHz to 2480 MHz Channel 0 Channel 19 Channel 39 2402 MHz 2440 MHz 2480 MHz Test channels for BT_EDR Test RF Channel Lists Mode Tx/Rx Frequency Lowest(L) Middle(M) Highest(H) GFSK Channel 0 Channel 39 Channel 78 2402 MHz to 2480 MHz (DH1, DH3, DH5) 2402 MHz 2441 MHz 2480 MHz π/4DQPSK Channel 0 Channel 39 Channel 78 2402 MHz to 2480 MHz (DH1, DH3, DH5) 2402 MHz 2441 MHz 2480 MHz 8DPSK Channel 0 Channel 39 Channel 78 2402 MHz to 2480 MHz (DH1, DH3, DH5) 2402 MHz 2441 MHz 2480 MHz Test channels for 2.4 GHz ISM Band of Wi-Fi Test RF Channel Lists Mode Tx/Rx Frequency Lowest(L) Middle(M) Highest(H) Channel 1 Channel 6 Channel 11 IEEE 802.11b 2412 MHz to 2462 MHz 2412 MHz 2437 MHz 2462 MHz Channel 1 Channel 6 Channel 11 IEEE 802.11g 2412 MHz to 2462 MHz 2412 MHz 2437 MHz 2462 MHz Channel 1 Channel 6 Channel 11 IEEE 802.11n-HT20 2412 MHz to 2462 MHz 2412 MHz 2437 MHz 2462 MHz Channel 3 Channel 6 Channel 9 IEEE 802.11n-HT40 2422 MHz to 2452 MHz 2422 MHz 2437 MHz 2452 MHz Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 7 of 13 Report No.: 180320001RFC-5 Test channels for 5 GHz U-NII Bands of Wi-Fi Test RF Channel Lists Mode Tx/Rx Frequency Lowest(L) Middle(M) Highest(H) Channel 36 Channel 44 Channel 48 5150 MHz to 5250 MHz 5180 MHz 5220 MHz 5240 MHz Channel 52 Channel 60 Channel 64 IEEE 802.11a 5250 MHz to 5350 MHz 5260 MHz 5300 MHz 5320 MHz IEEE 802.11n-HT20 IEEE 802.11ac-VHT20 Channel 100 Channel 116 Channel 140 5470 MHz to 5725 MHz 5500 MHz 5580 MHz 5700 MHz Channel 149 Channel 157 Channel 161 5725 MHz to 5850 MHz 5745 MHz 5785 MHz 5805 MHz Channel 38 -- Channel 46 5150 MHz to 5250 MHz 5190 MHz -- 5230 MHz Channel 54 -- Channel 62 5250 MHz to 5350 MHz IEEE 802.11n-HT40 5270 MHz -- 5310 MHz IEEE 802.11ac-VHT40 Channel 102 Channel 110 Channel 134 5470 MHz to 5725 MHz 5510 MHz 5550 MHz 5670 MHz Channel 151 -- Channel 159 5725 MHz to 5850 MHz 5755 MHz -- 5795 MHz -- Channel 42 -- 5150 MHz to 5250 MHz -- 5210 MHz -- -- Channel 58 -- 5250 MHz to 5350 MHz -- 5290 MHz -- IEEE 802.11ac-HT80 Channel 106 -- Channel 122 5470 MHz to 5725 MHz 5530 MHz -- 5610 MHz -- Channel 155 -- 5725 MHz to 5850 MHz -- 5775 MHz -- 1.5 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF product, according to the specifications of the manufacturers. It must comply with the requirements of the following standards: FCC 47 CFR Part 1 Subpart I All test items have been performed and recorded as per the above standards 1.6 TEST LOCATION All tests were performed at: Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China 518109 Telephone: +86 (0) 755 2823 0888 Fax: +86 (0) 755 2823 0886 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 8 of 13 Report No.: 180320001RFC-5 1.7 TEST FACILITY The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L9069 The measuring equipment utilized to perform the tests documented in this report has been calibrated once a year or in accordance with the manufacturer's recommendations, and is traceable under the ISO/IEC/EN 17025 to international or national standards. Equipment has been calibrated by accredited calibration laboratories. IC-Registration No.: 21600-1 The 3m Semi-anechoic chamber of Shenzhen UnionTrust Quality and Technology Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 21600-1. A2LA-Lab Certificate No.: 4312.01 Shenzhen UnionTrust Quality and Technology Co., Ltd. has been accredited by A2LA for technical competence in the field of electrical testing, and proved to be in compliance with ISO/IEC 17025: 2005 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC Accredited Lab. Designation Number: CN1194 Test Firm Registration Number: 259480 1.8 DEVIATION FROM STANDARDS None. 1.9 ABNORMALITIES FROM STANDARD CONDITIONS None. 1.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER None. 2. EQUIPMENT LIST Please refer to the RF test report. Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 9 of 13 Report No.: 180320001RFC-5 3. MPE EVALUATION 3.1 REFERENCE DOCUMENTS FOR EVALUATION No. Identity Document Title PROCEDURES IMPLEMENTING THE NATIONAL 1 FCC 47 CFR Part 1 Subpart I ENVIRONMENTAL POLICY ACT OF 1969 2 KDB 447498 D01 General RF RF EXPOSURE PROCEDURES AND EQUIPMENT Exposure Guidance v06 AUTHORIZATION POLICIES FOR MOBILE AND PORTABLE DEVICES 3.2 MPE COMPLIANCE REQUIREMENT 3.2.1 Limits According to §1.1307(b)(1), system operating under the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. Limits for Occupational / Controlled Exposure Electric Field Magnetic Field Averaging Times Frequency range Power Density (S) Strength (E) Strength (H) | E |2, | H |2 or S (MHz) (mW/cm2) (V/m) (A/m) (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f)* 6 30-300 61.4 0.163 1.0 6 300-1500 / / F/300 6 1500-100000 / / 5 6 Limits for General Population / Uncontrolled Exposure Electric Field Magnetic Field Averaging Times Frequency range Power Density (S) Strength (E) Strength (H) | E |2, | H |2 or S (MHz) (mW/cm2) (V/m) (A/m) (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 / / F/1500 30 1500-100000 / / 1 30 Note: f = frequency in MHz: * = Plane-wave equivalents power density. 3.2.2 Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3.3 MPE CALCULATION METHOD S = PG/4πR^2= EIRP/4πR^2 S = power density (in appropriate units, e.g., mw/cm2) P = power input to the antenna (in appropriate units, e.g., mw) G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor is normally numeric gain. R = distance to the center of radiation of the antenna (in appropriate units, e.g., cm) Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 10 of 13 Report No.: 180320001RFC-5 3.4 MPE CALCULATION RESULTS Note: For the test results, the EUT had been tested with all conditions. But only the worst case was shown in test report. 3.4.1 For WLAN For Wi-Fi function, operating at 2412MHz to 2462 MHz for IEEE802.11b/g/n and operating at 5150 MHz to 5250 MHz for IEEE802.11a/n/ac and operating at 5250 MHz to 5350 MHz for IEEE802.11a/n/ac and operating at 5470 MHz to 5725 MHz for IEEE802.11a/n/ac and operating at 5725 MHz to 5850 MHz for IEEE802.11a/n/ac. 3.4.1.1 Antenna Type: Chain 0: PCB Antenna 3.4.1.2 Antenna Gain: Chain 0: 2412MHz to 2462 MHz: 1.5 dBi 5150 MHz to 5250 MHz: 1.9 dBi 5250 MHz to 5350 MHz: 1.9 dBi 5470 MHz to 5725 MHz: 1.9 dBi 5725 MHz to 5850 MHz: 1.9 dBi 3.4.1.3 Results for WLAN Declared maximum Max. positive Calculated Declared conducted tolerance Antenna MPE MPE Freq. maximum maximum Operating Mode average according Gain Limit Value EIRP EIRP output manufacturer power (MHz) (dBm) (dBi) (dBm) (mW) (mw/cm2) 2412 16 1.5 1.5 19 79.4328 1 0.0158 IEEE 802.11b 2437 16 1.5 1.5 19 79.4328 1 0.0158 IEEE 802.11g 2462 16 1.5 1.5 19 79.4328 1 0.0158 2412 12 1.5 1.5 15 31.6228 1 0.0063 IEEE 802.11n 2437 12 1.5 1.5 15 31.6228 1 0.0063 2462 12 1.5 1.5 15 31.6228 1 0.0063 2422 12 1.5 1.5 15 31.6228 1 0.0063 IEEE 802.11n-HT40 2437 12 1.5 1.5 15 31.6228 1 0.0063 2452 12 1.5 1.5 15 31.6228 1 0.0063 5180 13 1.5 1.9 16.4 43.6516 1 0.0087 5220 13 1.5 1.9 16.4 43.6516 1 0.0087 5240 13 1.5 1.9 16.4 43.6516 1 0.0087 Chain 0 5260 13 1.5 1.9 16.4 43.6516 1 0.0087 5300 13 1.5 1.9 16.4 43.6516 1 0.0087 5320 13 1.5 1.9 16.4 43.6516 1 0.0087 IEEE 802.11a 5500 13 1.5 1.9 16.4 43.6516 1 0.0087 5580 13 1.5 1.9 16.4 43.6516 1 0.0087 5700 13 1.5 1.9 16.4 43.6516 1 0.0087 5745 13 1.5 1.9 16.4 43.6516 1 0.0087 5785 13 1.5 1.9 16.4 43.6516 1 0.0087 5825 13 1.5 1.9 16.4 43.6516 1 0.0087 5180 12 1.5 1.9 15.4 34.6737 1 0.0069 IEEE 802.11n-HT20 5220 12 1.5 1.9 15.4 34.6737 1 0.0069 IEEE 802.11ac- 5240 12 1.5 1.9 15.4 34.6737 1 0.0069 VHT20 5260 12 1.5 1.9 15.4 34.6737 1 0.0069 5300 12 1.5 1.9 15.4 34.6737 1 0.0069 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 11 of 13 Report No.: 180320001RFC-5 Declared maximum Max. positive Calculated Declared conducted tolerance Antenna MPE MPE Freq. maximum maximum Operating Mode average according Gain Limit Value EIRP EIRP output manufacturer power (MHz) (dBm) (dBi) (dBm) (mW) (mw/cm2) 5320 12 1.5 1.9 15.4 34.6737 1 0.0069 5500 12 1.5 1.9 15.4 34.6737 1 0.0069 5580 12 1.5 1.9 15.4 34.6737 1 0.0069 5700 12 1.5 1.9 15.4 34.6737 1 0.0069 5745 12 1.5 1.9 15.4 34.6737 1 0.0069 5785 12 1.5 1.9 15.4 34.6737 1 0.0069 5825 12 1.5 1.9 15.4 34.6737 1 0.0069 5190 9 1.5 1.9 12.4 17.3780 1 0.0035 5230 9 1.5 1.9 12.4 17.3780 1 0.0035 5270 9 1.5 1.9 12.4 17.3780 1 0.0035 IEEE 802.11n-HT40 5310 9 1.5 1.9 12.4 17.3780 1 0.0035 IEEE 802.11ac- 5510 9 1.5 1.9 12.4 17.3780 1 0.0035 VHT40 5550 9 1.5 1.9 12.4 17.3780 1 0.0035 5670 9 1.5 1.9 12.4 17.3780 1 0.0035 5755 9 1.5 1.9 12.4 17.3780 1 0.0035 5795 9 1.5 1.9 12.4 17.3780 1 0.0035 5230 9 1.5 1.9 12.4 17.3780 1 0.0035 5290 9 1.5 1.9 12.4 17.3780 1 0.0035 IEEE 802.11ac- 5530 9 1.5 1.9 12.4 17.3780 1 0.0035 VHT80 5610 9 1.5 1.9 12.4 17.3780 1 0.0035 5775 9 1.5 1.9 12.4 17.3780 1 0.0035 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 12 of 13 Report No.: 180320001RFC-5 3.4.2 For BT For BT_LE function, operating at 2402MHz to 2480 MHz for GFSK and For BT_EDR function, operating at 2402MHz to 2480 MHz for GFSK, π/4 DQPSK, 8DPSK 3.4.2.1 Antenna Type: Chain 0: Integral Antenna 3.4.2.2 Antenna Gain: Chain 0: 2402MHz to 2480 MHz: 1.5 dBi 3.4.2.3 Results for BT Max. positive Declared maximum Calculated Declared tolerance Antenna MPE MPE Operating Freq. conducted average maximum maximum according Gain Limit Value Mode output power EIRP EIRP manufacturer (MHz) (dBm) (dBm) (dBm) (dBm) (mW) (mw/cm2) 2402 7 1 1.5 9.5 8.9125 1 0.9982 LE 2440 7 1 1.5 9.5 8.9125 1 0.9982 2480 7 1 1.5 9.5 8.9125 1 0.9982 2402 10 1 1.5 12.5 17.7828 1 0.9965 EDR 2441 10 1 1.5 12.5 17.7828 1 0.9965 2480 10 1 1.5 12.5 17.7828 1 0.9965 3.4.3 Simultaneous Multi-band Transmission MPE Analysis 3.4.4.1 List of Mode for Simultaneous Multi-band Transmission No. Configurations Support/Not Support 1 2.4G_WLAN + BT Not Support 2 5G_ WLAN + BT Not Support 3 5G _WLAN + 2.4G_WLAN Not Support 3.4.4.2 Results for transmit simultaneously Not Applicable Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com

Page 13 of 13 Report No.: 180320001RFC-5 APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS Refer to Appendix 2 for EUT external and internal photos. *** End of Report *** The test report is effective only with both signature and specialized stamp. The result(s) shown in this report refer only to the sample(s) tested. Without written approval of UnionTrust, this report can’t be reproduced except in full. Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: info@uttlab.com Http://www.uttlab.com


Document Created: 2019-07-20 17:12:59
Document Modified: 2019-07-20 17:12:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC