Appendix_A

FCC ID:

RF Exposure Info

Download: PDF

Test Laboratory: UnionTrust                                                 Date: 2019/5/25


System Check_H750

DUT: Dipole 750 MHz

Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1
Medium: H750 Medium parameters used: {= 750 MHz; 0 = 0.896 mho/m; e = 40.3; p = 1000 kg/m>

DASY4 Configuration:
— Probe: ES3DV3 — SN3090; ConvyF(6.4, 6.4, 6.4); Calibrated: 2019/4/12
— Sensor—Surface: 3mm (Mechanical Surface Detection)
— Electronics: DAE4 $Sn662; Calibrated: 2019/4/11
— Phantom: SAM 2; Type: QD 000 P40 CB; Serial: TP—1376
— ; Postprocessing SW: SEMCAD, V1.8 Build 186


system check/Area Scan (51x81x1): Measurement grid: dx=15mm, dy=1 5mm
Maximum value of SAR (interpolated) = 0.770 mW/g

system check/Zoom Scan (5x5x7)/Cube 0: Mcasurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value= 24.4 V/m; Power Drift=0.140 dB
Peak SAR (extrapolated) = 1.04 W/kg
SAR(1 g) = 0.766 mW/g; SAR(10 g) = 0.431 mW/g
Maximum value of SAR (measured) = 0.785 mW/g

   dB
    0.000

    —2.18

    —4.36

    5.54

    —8.72

    110.3
               0 dB =0.785mW/g


Test Laboratory: UnionTrust                                                Date: 2019/5/23


System Check_H835

DUT: Dipole 835 MHz

Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1
Medium: H835 Medium parameters used: £=835 MHz; 0 = 0.897 mho/m; & = 41.9; p= 1000 kg/m>

DASY4 Configuration:
— Probe: ES3DV3 — SN3090; ConvF(6.12, 6.12, 6.12); Calibrated: 2019/4/12
— Sensor—Surface: 3mm (Mechanical Surface Detection)
— Electronics: DAE4 Sn662; Calibrated: 2019/4/11
— Phantom: SAM 2; Type: QD 000 P40 CB; Serial: TP—1376
— ; Postprocessing SW: SEMCAD, V1.8 Build 186


system check/Area Scan (51x81x1): Measurement grid: dx=1 5mm, dy=1 5mm
Maximum value of SAR (interpolated) = 0.114 mW/g

system check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value= 10.2 V/m; Power Drift=—0.03 dB
Peak SAR (extrapolated)= 0.143 W/kg
SAR(1 g) = 0.095 mW/g; SAR(10 g) = 0.062 mW/g
Maximum value of SAR (measured) =0.111 mW/g

   dB
    0.000

    —2.14

    ~4.28

    —6.42

    —8.56

    "10.7
               0 dB =0.111mW/g


Test Laboratory: UnionTrust                                                Date: 2019/5/26


System Check_H1800

DUT: Dipole 1800 MHz

Communication System: CW; Frequency: 1800 MHz;Duty Cycle: 1:1
Medium: H1800 Medium parameters used: £=1800 MHz; 0 = 1.43 mho/m; 8.= 39.2; p= 1000
kg/m>

DASY4 Configuration:
— Probe: ES3DV3 — SN3090; ConvF(5.36, 5.36, 5.36); Calibrated: 2019/4/12
— Sensor—Surface: 3mm (Mechanical Surface Detection)
— Electronics: DAE4 Sn662; Calibrated: 2019/4/11
— Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378
— ; Postprocessing SW: SEMCAD, V1.8 Build 186


system check/Area Scan (51x71x1): Measurement grid: dx=1 5mm, dy=1 5mm
Maximum value of SAR (interpolated) = 5.24 mW/g

system check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value = 48.7 V/m; Power Drift=0.101 dB
Peak SAR (extrapolated)= 7.06 W/kg
SAR(1 g) = 3.9 mW/g; SAR(10 g) = 2.05 mW/g
Maximum value of SAR (measured) = 4.90 mW/g

   dB
    0.000

    —3.52

    —7.04

    10.6

    "14.1

    "17.6
               0 dB =4.90mW/g


Test Laboratory : UnionTrust                                               Date: 2019/526


System Check_H1900

DUT: Dipole 1900 MHz

Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1
Medium: H1900 Medium parameters used: £= 1900 MHz; 0 = 1.44 mho/m; s =41; p = 1000 kg/m3

DASY4 Configuration:
— Probe: ES3DV3 — SN3090; ConvF(6.4, 6.4,6.4); Calibrated: 2019/4/12
— Sensor—Surface: 3mm (Mechanical Surface Detection)
— Electronics: DAE4 $n662; Calibrated: 2019/4/11
— Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378
— ; Postprocessing SW: SEMCAD, V1.8 Build 186



system check/Area Scan (51x71x1): Measurement grid: dx=15mm, dy=1 5mm
Maximum value of SAR (interpolated) = 0.440 mW/g

system check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value=9.15 V/m; Power Drift= 0.031 dB
Peak SAR (extrapolated) =0.609 W/kg
SAR(1 g) = 0.379 mW/g; SAR(10 g) = 0.178 mW/g
Maximum value of SAR (measured) = 0.426 mW/g

    dB
    0.000

    3.52

    —7.04

    10.6

    14.

    "17.6
                0 dB = 0.426mW/g


Test Laboratory: UnionTrust                                                 Date: 2019/5730


System Check_H2450

DUT: Dipole 2450 MHz

Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1
Medium: H2450 Medium parameters used: £= 2450 MHz; 0 = 1.85 mho/m; s = 38; p = 1000 kg/m>

DASY4 Configuration:
— Probe: ES3DV3 — SN3090; ConvyF(6.4, 6.4, 6.4); Calibrated: 2019/4/12
— Sensor—Surface: 3mm (Mechanical Surface Detection)
— Electronics: DAE4 $Sn662; Calibrated: 2019/4/11
— Phantom: SAM 2; Type: QD 000 P40 CB; Serial: TP—1376
— ; Postprocessing SW: SEMCAD, V1.8 Build 186


system check/Area Scan (51x71x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (interpolated)= 7.82 mW/g

system check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value= 50.3 V/m; Power Drift=0.129 dB
Peak SAR (extrapolated) = 11.2 Wikg
SAR(1 g) = 5.25 mW/g; SAR(10 g) = 2.4 mW/g
Maximum value of SAR (measured) =6.91 mW/g

   dB
    0.000

    ~4.64

    ~1.28

    ~13.9

    —18.6

    —23.2
               0 dB =6.91mW/g


Test Laboratory: UnionTrust                                                Date: 2019/931


System Check_H2600

DUT: Dipole 2600 MHz

Communication System: CW; Frequency: 2600 MHz;Duty Cycle: 1:1
Medium: H2600 Medium parameters used: £= 2600 MHz; 0 =2.02 mho/m; &.= 37.6; p = 1000
kg/m*

DASY4 Configuration:
— Probe: ES3DV3 — SN3090; ConvyF(6.4, 6.4, 6.4); Calibrated: 2019/4/12
— Sensor—Surface: 3mm (Mechanical Surface Detection)
— Electronics: DAE4 $n662; Calibrated: 2019/4/11
— Phantom: SAM 2; Type: QD 000 P40 CB; Serial: TP—1376
— ; Postprocessing SW: SEMCAD, V1.8 Build 186


system check/Area Scan (51x71x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (interpolated)= 0.663 mW/g

system check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=Smm
Reference Value=6.88 V/m; Power Drift=0.05 dB
Peak SAR (extrapolated)= 1.11 Wikg
SAR(1 g) = 0.515 mW/g; SAR(10 g) = 0.224 mW/g
Maximum value of SAR (measured) = 0.672 mW/g

   dB
    0.000

    —5.00

    —10.0

    ~15.0

    —20.0

    ~25.0
               0 dB =0.672mW/g


Test Laboratory : UnionTrust                                                Date: 2019/526


System Check_B750

DUT: Dipole 750 MHz

Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1
Medium: B750 Medium parameters used: £=750 MHz; 0 = 0.967 mho/m; &,.= 55.3; p = 1000 kg/m3

DASY4 Configuration:
— Probe: ES3DV3 — SN3090; ConvF(6.4, 6.4,6.4); Calibrated: 2019/4/12
— Sensor—Surface: 3mm (Mechanical Surface Detection)
— Electronics: DAE4 $n662; Calibrated: 2019/4/11
— Phantom: SAM 2; Type: QD 000 P40 CB; Serial: TP—1376
— ; Postprocessing SW: SEMCAD, V1.8 Build 186



system check/Area Scan (51x81x1): Measurement grid: dx=15mm, dy=1 5mm
Maximum value of SAR (interpolated) = 1.04 mW/g

system check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value=27.0 V/m; Power Drift= 0.002 dB
Peak SAR (extrapolated) = 1.36 Wikg
SAR(1 g) = 0.894 mW/g; SAR(10 g) = 0.587 mW/g
Maximum value of SAR (measured) = 1.04 mW/g

    dB
    0.000

    —2.06

    4.12

    —6.18

    —8.24

    110.3
                0 dB =1.04mwW/g


Test Laboratory: UnionTrust                                                 Date: 2019/5/22


System Check_B835

DUT: Dipole 835 MHz

Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1
Medium: B835 Medium parameters used: £= 835 MHz; 0 = 0.996 mho/m; e = 56.4; p = 1000 kg/m>

DASY4 Configuration:
— Probe: ES3DV3 — SN3090; ConvF(6.18, 6.18, 6.18); Calibrated: 2019/4/12
— Sensor—Surface: 3mm (Mechanical Surface Detection)
— Electronics: DAE4 Sn662; Calibrated: 2019/4/11
— Phantom: SAM 2; Type: QD 000 P40 CB; Serial: TP—1376
— ; Postprocessing SW: SEMCAD, V1.8 Build 186


system check/Area Scan (51x81x1): Measurement grid: dx=1 5mm, dy=1 5mm
Maximum value of SAR (interpolated)= 0.111 mW/g

system check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value=8.89 V/m; Power Drift=0.110 dB
Peak SAR (extrapolated)= 0.139 W/kg
SAR(1 g) = 0.096 mW/g; SAR(10 g) = 0.063 mW/g
Maximum value of SAR (measured) =0.111 mW/g

   dB
    0.000

    —2.06

    4.12

    —6.18

    —8.24

    10.3
               0 dB =0.111mW/g


Test Laboratory: UnionTrust                                                 Date: 2019/5/20


System Check_B1750

DUT: Dipole 1750 MHz

Communication System: CW; Frequency: 1750 MHz;Duty Cycle: 1:1
Medium: MSL1750 Medium parameters used: £= 1750 MHz; 0= 1.46 mho/m; 8.= 54.8; p= 1000
kg/m*

DASY4 Configuration:
— Probe: ES3DV3 — SN3090; ConvyF(4.95, 4.95, 4.95); Calibrated: 2019/4/12
— Sensor—Surface: 3mm (Mechanical Surface Detection)
— Electronics: DAE4 $n662; Calibrated: 2019/4/11
— Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378
— ; Postprocessing SW: SEMCAD, V1.8 Build 186


system check/Area Scan (51x71x1): Measurement grid: dx=15mm, dy=1 5mm
Maximum value of SAR (interpolated)= 0.531 mW/g

system check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=Smm
Reference Value=18.2 V/m; Power Drift=0.024 dB
Peak SAR (extrapolated) = 0.659 W/kg
SAR(1 g) = 0.376 mW/g; SAR(10 g) = 0.201 mW/g
Maximum value of SAR (measured) = 0.473 mW/g

   dB
    0.000

    —3.30

    ~6.60

    ~9.90

    —13.2

    —16.5
               0 dB =0.473mW/g


Test Laboratory : UnionTrust                                                Date: 2019/521


System Check_B1900

DUT: Dipole 1900 MHz

Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1
Medium: B1900 Medium parameters used: {= 1900 MHz; 0 = 1.55 mho/m; &.= 52.5; p = 1000

kg/m*

DASY4 Configuration:
— Probe: ES3DV3 — SN3090; ConvF(6.4, 6.4,6.4); Calibrated: 2019/4/12
— Sensor—Surface: 3mm (Mechanical Surface Detection)
— Electronics: DAE4 $n662; Calibrated: 2019/4/11
— Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378
— ; Postprocessing SW: SEMCAD, V1.8 Build 186


system check/Area Scan (51x71x1): Measurement grid: dx=15mm, dy=1 5mm
Maximum value of SAR (interpolated) = 0.548 mW/g

system check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value=13.7 V/m; Power Drift=0.02 dB
Peak SAR (extrapolated) = 0.754 W/kg
SAR(1 g) = 0.418 mW/g; SAR(1O g) = 0.217 mW/g
Maximum value of SAR (measured) = 0.522 mW/g

    dB
    0.000

    —3.64

    —7.28

    10.9

    14.6



                0 dB =0.522mW/g


Test Laboratory: UnionTrust                                                Date: 2019/5/30


System Check_B2450

DUT: Dipole 2450 MHz

Communication System: CW; Frequency: 2450 MHz:Duty Cycle: 1:1
Medium: M2450 Medium parameters used: £= 2450 MHz; a=2.01 mho/m; 8.= 53.1;p =1000
kg/m>

DASY4 Configuration:
— Probe: ES3DV3 — SN3090; ConvF(4.47, 4.47, 4.47); Calibrated: 2019/4/12
— Sensor—Surface: 3mm (Mechanical Surface Detection)
— Electronics: DAEA4 $n662; Calibrated: 2019/4/11
— Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1125
— ; Postprocessing SW: SEMCAD, V1.8 Build 186


system check/Area Scan (51x71x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (interpolated) = 6.24 mW/g

system check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, daz=5mm
Reference Value= 34.0 V/m; Power Drift=0.021 dB
Peak SAR (extrapolated) = 9.47 W/kg
SAR(1 g) = 4.83 mW/g; SAR(10 g) = 2.09 mW/g
Maximum value of SAR (measured) = 5.86 mW/g

   dB
    0.000

    ~4.56

    —9.12

    "13.7

    "18.2

    —22.8
               0 dB = 5.86mW/g


Test Laboratory: UnionTrust                                                 Date: 2019/5/29


System Check_B2600

DUT: Dipole 2600 MHz

Communication System: CW; Frequency: 2600 MHz;Duty Cycle: 1: 1
Medium: B2600 Medium parameters used: £= 2600 MHz; 0 = 2.2 mho/m; e = 52.4; p = 1000 kg/m>

DASY4 Configuration:
— Probe: ES3DV3 — SN3090; ConvF(6.4, 6.4, 6.4); Calibrated: 2019/4/12
— Sensor—Surface: 3mm (Mechanical Surface Detection)
— Electronics: DAE4 Sn662; Calibrated: 2019/4/11
— Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1125
— ; Postprocessing SW: SEMCAD, V1.8 Build 186


system check/Area Scan (51x71x1): Measurement grid: dx=12mm, dy=12mm
Maximum value of SAR (interpolated) = 0.759 mW/g

system check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Reference Value=7.10 V/m; Power Drift=0.05 dB
Peak SAR (extrapolated)= 1.28 W/kg
SAR(1 g) = 0.577 mW/g; SAR(10 g) = 0.256 mW/g
Maximum value of SAR (measured) = 0.768 mW/g

   dB
    0.000

    —5.00

    10.0

    "15.0

    —20.0

    —25.0
               0 dB =0.768mW/g


Test Laboratory: UnionTrust                                                   Date: 6/24/2019

System Check-D5GHz_H5250

DUT: Dipole D5GHzV2 SN:1145

Communication System: CW; Frequency: 5250 MHz;Duty Cycle: 1:1
Medium: H5G Medium parameters used: f = 5250 MHz; σ = 4.721 S/m; εr = 36.359; ρ = 1000 kg/m3

DASY4 Configuration:
- Probe: EX3DV4 - SN7351; ConvF(5.4, 5.4, 5.4); Calibrated: 12/14/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn679; Calibrated: 4/23/2019
- Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378
- ; Postprocessing SW: SEMCAD, V1.8 Build 186


Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 19.6 W/kg

Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 71.97 V/m; Power Drift = -0.13 dB
Peak SAR (extrapolated) = 33.9 W/kg
SAR(1 g) = 8.17 W/kg; SAR(10 g) = 2.4 W/kg
Maximum value of SAR (measured) = 19.0 W/kg


Test Laboratory: UnionTrust                                                   Date: 6/24/2019

System Check-D5GHz_H5600

DUT: Dipole D5GHzV2 SN:1145

Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1
Medium: H5G Medium parameters used: f = 5600 MHz; σ = 5.065 S/m; εr = 35.849; ρ = 1000 kg/m3

DASY4 Configuration:
- Probe: EX3DV4 - SN7351; ConvF(4.77, 4.77, 4.77); Calibrated: 12/14/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn679; Calibrated: 4/23/2019
- Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378
- ; Postprocessing SW: SEMCAD, V1.8 Build 186


Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 20.2 W/kg

Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 72.22 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 37.0 W/kg
SAR(1 g) = 8.31 W/kg; SAR(10 g) = 2.36 W/kg
Maximum value of SAR (measured) = 19.9 W/kg


Test Laboratory: UnionTrust                                                   Date: 6/24/2019

System Check-D5GHz_H5750

DUT: Dipole D5GHzV2 SN:1145

Communication System: CW; Frequency: 5750 MHz;Duty Cycle: 1:1
Medium: H5G Medium parameters used: f = 5750 MHz; σ = 5.224 S/m; εr = 35.651; ρ = 1000 kg/m3

DASY4 Configuration:
- Probe: EX3DV4 - SN7351; ConvF(4.9, 4.9, 4.9); Calibrated: 12/14/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn679; Calibrated: 4/23/2019
- Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378
- ; Postprocessing SW: SEMCAD, V1.8 Build 186


Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 18.9 W/kg

Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 68.75 V/m; Power Drift = 0.03 dB
Peak SAR (extrapolated) = 36.8 W/kg
SAR(1 g) = 7.75 W/kg; SAR(10 g) = 2.19 W/kg
Maximum value of SAR (measured) = 19.2 W/kg


Test Laboratory: UnionTrust                                                   Date: 6/25/2019

System Check-D5GHz_B5250

DUT: Dipole D5GHzV2 SN:1145

Communication System: CW; Frequency: 5250 MHz;Duty Cycle: 1:1
Medium: B5G Medium parameters used: f = 5250 MHz; σ = 5.494 S/m; εr = 48.293; ρ = 1000 kg/m3

DASY4 Configuration:
- Probe: EX3DV4 - SN7351; ConvF(4.49, 4.49, 4.49); Calibrated: 12/14/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn679; Calibrated: 4/23/2019
- Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378
- ; Postprocessing SW: SEMCAD, V1.8 Build 186


Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 17.1 W/kg

Pin=100mW/Zoom Scan (7x7x6)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 50.15 V/m; Power Drift = 0.05 dB
Peak SAR (extrapolated) = 30.1 W/kg
SAR(1 g) = 7.18 W/kg; SAR(10 g) = 2.03 W/kg
Maximum value of SAR (measured) = 17.6 W/kg


Test Laboratory: UnionTrust                                                   Date: 6/25/2019

System Check-D5GHz_B5600

DUT: Dipole D5GHzV2 SN:1145

Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1
Medium: B5G Medium parameters used: f = 5600 MHz; σ = 5.957 S/m; εr = 47.703; ρ = 1000 kg/m3

DASY4 Configuration:
- Probe: EX3DV4 - SN7351; ConvF(3.91, 3.91, 3.91); Calibrated: 12/14/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn679; Calibrated: 4/23/2019
- Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378
- ; Postprocessing SW: SEMCAD, V1.8 Build 186


Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 17.8 W/kg

Pin=100mW/Zoom Scan (7x7x6)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 50.40 V/m; Power Drift = 0.05 dB
Peak SAR (extrapolated) = 30.3 W/kg
SAR(1 g) = 7.42 W/kg; SAR(10 g) = 2.11 W/kg
Maximum value of SAR (measured) = 18.7 W/kg


Test Laboratory: UnionTrust                                                   Date: 6/25/2019

System Check-D5GHz_B5750

DUT: Dipole D5GHzV2 SN:1145

Communication System: CW; Frequency: 5750 MHz;Duty Cycle: 1:1
Medium: B5G Medium parameters used: f = 5750 MHz; σ = 6.165 S/m; εr = 47.5; ρ = 1000 kg/m3

DASY4 Configuration:
- Probe: EX3DV4 - SN7351; ConvF(4.1, 4.1, 4.1); Calibrated: 12/14/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn679; Calibrated: 4/23/2019
- Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378
- ; Postprocessing SW: SEMCAD, V1.8 Build 186


Pin=100mW/Area Scan (91x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 17.6 W/kg

Pin=100mW/Zoom Scan (7x7x6)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm
Reference Value = 51.43 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 32.6 W/kg
SAR(1 g) = 7.28 W/kg; SAR(10 g) = 2.03 W/kg
Maximum value of SAR (measured) = 18.2 W/kg



Document Created: 2019-09-11 00:17:47
Document Modified: 2019-09-11 00:17:47

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC