Users Manual

FCC ID: 2AIHFZYRMO

Users Manual

Download: PDF
FCCID_3081561










(Charging camera: when you want to charge GoPro camera, please power on the gimbal and plug camera charging cable into the bottom port of pitch motor and the USB port of the camera to charge the camera, as indicated by Video output & left figure. charging cable Video output: when you want to connect analogue monitor to watch real—time image, please power on the gimbal and plug video output & charging cable into corresponding port separately, Connect 3.5mm video output port and analogue monitor port via 3.5mm Video output cable{( ihis cable isn‘t our product).) AV data GND{


For Andraid(supporting Android 4.31) users, please download from Zhiyun offcial wobsita( wwwazhiyun—tech.com ) or scan the loft OR code to download. For I0S users, pleaso search and download APP (ZhiVun Assistant) from APP Store. @pSeumgs [G] 5is curt management 1 & um o (} Sluetooth @ Dnta tratte managomy \, @Turn on the gimbal by pressing @Tutn on the Bluetooth function the Power button in the phone Sattings. ®Open Rider—M APP, search for Bluetooth signals nearly and connect gimbal. Then the APP enter to Control page. Click Power ON, the gimbal start to work,

Remote co gimbal When the gimbal start to work, the Control page allows mode selection, angle changing on all axes and one key to return back to ariginal working position. After gimbal connecting APP, enter to Calibration page, click START CALIBRATION, then place the gimbal as shown on the Contract Image( total 6 pictures) to complete six—side calibration. After gimbal connecting APP, enter to Update page,click START UPDATE to update gimbal firmware.







The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.


Document Created: 2016-07-28 17:10:38
Document Modified: 2016-07-28 17:10:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC