User manual

FCC ID: 2AID3-V8BT

Users Manual

Download: PDF
FCCID_3008680

USER‘S MANUAL

L—About 1t is asterco headset with Bluctooth technology.It supports the following lowing Bluctooth profites: HSP—Headset Profile HEP — Hands—free Profile AZDP—aAdvanced Audio Distribution Profile sproirtcations Yer. Bluetooth V4.0 Bluctooth Profites usr.urr.AzDr Effecrive Kange =10Merers Music Time *o Hours Standby Time 8oHours Input DC:sV/ 400mAH Charge Time About 2— 3 hours Charge Port use Battery Type Lithium] Battery Capacity 400mAH Microphone Support —s8 20B Speaker Material NdfeB 40mm Sensirivity 105aB 43 B >1% AcIKHz Power To Bear somw zo rmsem Naw About 2152 BUTTONJINTERFACE.SWITCH ON/OFE Power on/ off top and runthe system »a se / P + Ona/Volume Short pres — Next/Volume— Short press.the next. song / Long press,the volume down vo Audio 1O Interface External device aduio input carphone spealcerheadphone audio output to external speakers Charging Conneer the charger USBcharge 2. C harging the battery with USB cable Before charging.power. off the headset.Using the the charging cable connect headset and computer USB or other indieator light red bright.It express 2

successful connection,the headset is charging Built —in battery capacity detection system with ovetload protection.Need not to care long charging timeimpact on the battery.Indicator goes off,chargingis complete. * Low battery—power is low when the green,red and blue linhts blink alternately,Charge as soon as possible,so as to meet the needs of the bluetooth system. * Note:Do not open the proc of charging the headset power, otherwise damage headset hardware and battery life. 3. Use steps * On/ofT(switch).push switch to on,headset will then stsrt.Indicator light blue and red blinks alternately with each other.Bluetooth function of headset have starting and waiting for connect state.At this point the bluetooth headset can be find in the state. * Click on phone bluetooth service and select start.which open the bluetooth function ophone & Opening the phone bluetooth options and search.you willfind the bluetooth for march,the useful I ing show WY—8868.Click on the W\—8868 can connect,headset indicator light green blinks only.it express connection successfully.Note:need to entrythe password(0000)if connect some phones or others. * 1the pairing is not suecessful.please switch off headset firstly,and then re—pair again. After patring is successful.paired devices will remember each other. Unless pairing information is deleted because of new pairing,no need to pair when use next time.If you want to pair the headset with other devices,please pair it with the new device according tosteps 1~6 mentioned above. Multilink technology allows simultancous connection to two different devices.just simply repeat the pairingprocess on both devices. > Re—connecting to a Bluetooth device Automatic connecting tw

Everytime the headset is switched on it wil connect to the nearest and Iast connected device autom ally. >Manual connecting to last—connected device When the headset is in standby mode and doe n‘t connect to any device short press MFB button once. it will connect to last connected device automatically. 4.Precautions 1) The headset is not waterproof,note that waterproof and moisture in order to ensute the system can use normally. 2) It can t to place long—term,need to charge and discharge one time weekly in order to exrend battery life. 3) It is major of support computer USB to cl irge,not change or connect to otherinternal power to charge

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.


Document Created: 2016-05-24 14:46:32
Document Modified: 2016-05-24 14:46:32
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC