RF Exposure

FCC ID: 2AI88-BTPBT2017

RF Exposure Info

Download: PDF
FCCID_3817130

RF Exposure Compliance Requirement The product belongs to standalone portable device base the FCC rule part 2.1093. The transmission frequencies of the device are between 100 MHz and 6 GHz. The worst case test separation distance is 5mm. The Max Conducted Output Power and SAR Test Exclusion Threshold (mW) are listed below: Transmit frequency Max Conducted Max Conducted SAR Test Exclusion (GHz) Output Power (dBm) Output Power (mW) Threshold (mW) 2.402 1 1.259 9.68 2.441 3 1.995 9.62 2.480 4 2.512 9.52 Frequency Tune up max power Nominal Power Tolerance(dB) (MHz) (dBm) 2.402 0dBm +/- 1 1 2.441 2dBm +/- 1 3 2.480 3dBm +/- 1 4 The SAR Test Exclusion Threshold for 100 MHz to 6 GHz is calculated from: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. According to SAR Exclusion Threshold in KDB 447498 (D01) General RF Exposure Guidance v06, the SAR report is not required.


Document Created: 2018-04-11 16:41:19
Document Modified: 2018-04-11 16:41:19
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC