User manual

FCC ID: 2AI88-BTPBT2017

Users Manual

Download: PDF
FCCID_3817123

Safety Instruction: Bluetooth® Wireless Speaker Buttons: How to Charge the Speaker: Play / Pause: • Do not use this device near water; clean only using a dry or slightly This speaker has built-in rechargeable battery, before the first use, the • Press the to play or pause the song , press it again to pause or moist cloth. battery should be charged to ensure optimal performance and battery continue to play the song. • The appliance shall not be exposed to dripping or splashing and no life. Pull the speaker cover gentlely, micro USB jack is under the cover. objects filled with liquids, such as vases, shall be placed near the Charging the speaker for about 4 hours by connecting the speaker to the product. ON / OFF / USB port of a PC which is powered on, alternately the speaker may be Previous / Next Song: • Do not place speaker on any wet surface. SWITCH MODE powered by a AC/DC wall charger (not included) with a 5V 500mA • Press the button ( , ) once to select the song. Press the • Do not cover the unit with any table-clothes, curtains, etc. Place the INDICATION VOLUME UP / SKIP USB output. The red charging indication light will be “on” while it is for the previous song, press for the next song. unit where there is good air circulation. LIGHT charging, it turns off while fully charged. • No naked flames sources, such as candles, should be placed near the PLAY / PAUSE VOLUME DOWN / Bluetooth Pairing: product. REWIND Volume Control: • Press the player’s button gently. Pressing them too hard can damage • Press and hold the ON/OFF button ( /M ) for about 3 seconds to • Press and hold ( , ) for a while to adjust the sound volume. turn on the speaker. The blue color indication light will flash Front: the player. alternatively showing it is in bluetooth pairing mode. Press to decrease sound volume; press to increase sound Plush with Bluetooth® Speaker • Do not expose product to temperature above 35˚C; keep it out of direct sunlight. • The speaker starts searching for bluetooth device. volume. Stop press while it reaches the desired sound level. • This product has no user-serviceable parts. Do not attempt to repair • Turn on your bluetooth enabled music player device ( ie. iPod/iPhone, User Manual this product yourself. KEY RING SPEAKER COVER MICROPHONE mobile phone or compatible device) to search this bluetooth speaker. Handsfree function: • This speaker has built-in microphone, it can be work as handsfree • Do not subject the product to harsh impacts. Do not drop the Please refer to the device user manual to activate the bluetooth RESET speaker after connnected mobile phone with bluetooth connection. appliance. This may result in damage to the product. function and pairing procedures. • Do not place unit near TV, speakers, wireless telephones and other • Select to pair the “iCRW-MB3P” device from the bluetooth list. • User can pick up the phone call by press the Play / Pause once. MICRO USB JACK objects that generate strong magnetic fields. • Once paired the blue indication light will be ON. Now you can play • Hang up the calling by press the Play / Pause button once again. • When the unit is affected by a strong electromagnet field or by other music from your bluetooth device to this bluetooth speaker. • Keep press Play / Pause button for about 2 seconds to redial the interference simply turn off to reset the speakers, it will return to last called phone number. ( not the call-in number ) Please read this user manual carefully before operating the appliance; and normal operation. • When it is not being used for a long period time, please turn off the save it for further reference. speaker. Camera Shutter function: 3. Close the velcro properly and enjoy your music with the plush. Troubleshooting: FCC Warning: This device complies with Part 15 of the FCC Rules. • When connected bluetooth, short press the /M button to switch 1. Cannot pair successfully Changes or modifications to this unit not expressly approved by the party Operation is subject to the following two conditions: responsible for compliance could void the user’s authority to operate the to camera shutter mode. ( with shutter sound indication ) Check whether the speaker is in power on and bluetooth is in searching ► equipment. (1) this device may not cause harmful interference, and • Open the Camera application on your mobile phone. mode. (2) this device must accept any interference received, including interference that • Press the to take photo. ► Check whether there are too many bluetooth receviers around. Turn them NOTE: may cause undesired operation. off to avoid any disturbance and pair again. This equipment has been tested and found to comply with the limits for a Class B Bluetooth Speaker and the Plush: digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 2. The sound is too low or distorted provide reasonable protection against harmful interference in a residential 1. There has a velcro on the rear side of the plush. ► Check the volume setting on your device and adjust the volume to a installation. suitable sound level. Rear: Others: ► Check if the speaker is battery low, charge the speaker. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful This bluetooth speaker has a key ring, you can bring it with you interference to radio communications. everywhere, and it can works as a stand. 3. Cannot play music properly ► Check whether the distance between the speaker and bluetooth device However, there is no guarantee that interference will not occur in a particular is too far from its working distance ( maximum 10M in outdoor operating installation. If this equipment does cause harmful interference to radio or television space ) or whether there are some obstancles blocking the communication reception, which can be determined by turning the equipment off and on, the user between the speaker and bluetooth device. is encouraged to try to correct the interference by one or more of the following 2. Open the velcro and place the bluetooth speaker inside. measures: 4. Speaker malfunction - Reorient or relocate the receiving antenna. BC ► Press the “RESET” button by using a pin and restart the device. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the 5. Speaker play “bi bi” sound receiver is connected. ► The battery is in low level, please charge the unit. - Consult the dealer or an experienced radio/TV technician for help. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Moppet Enterprises Limited is under license. Other trademarks and trade KEY RING SPEAKER STAND names are those of their respective owners.


Document Created: 2016-06-21 10:17:47
Document Modified: 2016-06-21 10:17:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC