RF Exposure

FCC ID: 2AI7B-W5

RF Exposure Info

Download: PDF
FCCID_4457810

OttLite Technologies, Inc. TEST REPORT SCOPE OF WORK SAR Assessment– W5 REPORT NUMBER 190829003SZN-002 ISSUE DATE [REVISED DATE] 16 September 2019 [--------------------] PAGES 4 DOCUMENT CONTROL NUMBER RF Exposure © 2017 INTERTEK

101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, ShenZhen. Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 www.intertek.com TEST REPORT Intertek No.: 190829003SZN-002 Test Report Applicant : OttLite Technologies, Inc. 220 West 7th Avenue STE 100 Tampa, FL 33602 United States Sample Description Product : LED table lamp Model No. : W5 Brand Name : Electrical Rating : Input: DC 12V, 3A from adapter Output: DC5V, 1A or DC9V, 1.1A by Wireless Charging Output: DC5V, 2.1A by USB Date Received : 29 August 2019 Date Test Conducted : 29 August 2019 to 12 September 2019 Test Requested : Test for compliance with CFR 47 part 1 Test Method : Environmental evaluation and exposure limit according to FCC CFR 47 part 1, 1.1307(c) and (d), 1.1310 Test Result : Pass Conclusion : When determining of test conclusion, measurement uncertainty of tests have been considered. ******************************** End of Page ******************************** Prepared and Checked By: Approved By: Jeff Liang Kidd Yang Engineer Technical Supervisor Date: 16 September 2019 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community, GuanHu Subdistrict, LongHua District, ShenZhen. Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Version: 01-November-2017 Page 1 of 4 RF Exposure

TEST REPORT Intertek No.: 190829003SZN-002 Test Report Test Setup Configuration Note - The RF exposure test is performed in the shield room. - The test distance is between the edge of the charger and the geometric centre of probe. Test Equipment List Name of instrument Model Manufacturer Cal. Date Due Date Exposure Level Tester EHP-50F Narda 01-Apr-2019 01-Apr-2020 Version: 01-November-2017 Page 2 of 4 RF Exposure

TEST REPORT Intertek No.: 190829003SZN-002 Reference Limit: Environmental evaluation and exposure limit according to FCC CFR 47 part 1, 1.1307(c) and (d), 1.1310 According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation. LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) strength (V/m) Strength (A/m) (mW/cm2) (minutes) (A) Limits for Occupational/Controlled Exposure 0.3 – 3.0 614 1.63 (100) * 6 (B) Limits for General Population/Uncontrolled Exposure 0.3 – 1.34 614 1.63 (100) * 30 Note: * = Plane wave equivalent power density Test Result: H-Field Strength at 15 cm surrounding the EUT and 20cm above the top surface of the EUT Frequency EUT Probe Probe Probe Probe Probe Limits Range Operation Position Position Position Position Position (A/m) (MHz) mode Front (A/m) Rear (A/m) Left (A/m) Right (A/m) Top (A/m) 0.110- 1% Battery 0.0233 0.0928 0.0344 0.0594 0.0234 1.63 0.205 Level 50% 0.110- Battery 0.0231 0.0925 0.0342 0.0593 0.0231 1.63 0.205 Level 99% 0.110- Battery 0.0233 0.0927 0.0344 0.0591 0.0233 1.63 0.205 Level 0.110- Stand-by 0.0023 0.0024 0.0231 0.0242 0.0241 1.63 0.205 E-Field Strength at 15 cm surrounding the EUT and 20cm above the top surface of the EUT Frequency EUT Probe Probe Probe Probe Probe Limits Range Operation Position Position Position Position Position (V/m) (MHz) mode Front (V/m) Rear (V/m) Left (V/m) Right (V/m) Top (V/m) 0.110- 1% Battery 0.6726 0.7984 0.8536 0.7775 1.0372 614 0.205 Level 50% 0.110- Battery 0.6724 0.7982 0.8536 0.7774 1.0371 614 0.205 Level 99% 0.110- Battery 0.6724 0.7983 0.8535 0.7774 1.0370 614 0.205 Level 0.110- Stand-by 0.6725 0.0372 0.0328 0.0592 0.0343 614 0.205 Version: 01-November-2017 Page 3 of 4 RF Exposure

TEST REPORT Intertek No.: 190829003SZN-002 Configuration photo of the test: For electronic filing, H-Field & E-Field Strength configuration photographs are saved with filename: H-Field & E-Field Strength test setup photos.pdf. ****************************** End of Report****************************** Version: 01-November-2017 Page 4 of 4 RF Exposure


Document Created: 2019-09-22 16:17:01
Document Modified: 2019-09-22 16:17:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC