Test Report

FCC ID: 2AI53-MC601V

Test Report

Download: PDF
FCCID_3102180

FCC PART 15.249 TEST REPORT For Shenzhen Merrytek Technology Co.,LTD NO.3 Building,380 Xiangshan Avenue,Luotian,Songgang Town,Bao'an District,Shenzhen,Guangdong,China FCC ID: 2AI53-MC601V Report Type: Product Type: Original Report Lighting Control Switch Test Engineer: Rocky Xiao Report Number: RDG160616051-00 Report Date: 2016-08-11 Jerry Zhang Reviewed By: EMC Manager Test Laboratory: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industrial Zone, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Dongguan).

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 TABLE OF CONTENTS GENERAL INFORMATION .......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................3 OBJECTIVE ...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S) .............................................................................................................................3 TEST METHODOLOGY ..................................................................................................................................................3 TEST FACILITY .............................................................................................................................................................3 SYSTEM TEST CONFIGURATION ..........................................................................................................................4 JUSTIFICATION .............................................................................................................................................................4 EUT EXERCISE SOFTWARE ..........................................................................................................................................4 EQUIPMENT MODIFICATIONS .......................................................................................................................................4 SUPPORT EQUIPMENT LIST AND DETAILS ....................................................................................................................4 EXTERNAL I/O CABLE..................................................................................................................................................4 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................4 SUMMARY OF TEST RESULTS ...............................................................................................................................5 FCC§15.203 - ANTENNA REQUIREMENT..............................................................................................................6 APPLICABLE STANDARD ..............................................................................................................................................6 ANTENNA CONNECTOR CONSTRUCTION ......................................................................................................................6 FCC §15.207 (A) – AC LINE CONDUCTED EMISSIONS ......................................................................................7 APPLICABLE STANDARD ..............................................................................................................................................7 MEASUREMENT UNCERTAINTY ....................................................................................................................................7 EUT SETUP ..................................................................................................................................................................7 EMI TEST RECEIVER SETUP .........................................................................................................................................8 TEST PROCEDURE ........................................................................................................................................................8 CORRECTED AMPLITUDE & MARGIN CALCULATION ...................................................................................................8 TEST EQUIPMENT LIST AND DETAILS ...........................................................................................................................9 TEST RESULTS SUMMARY ............................................................................................................................................9 TEST DATA ..................................................................................................................................................................9 FCC§15.205, §15.209&§15.249- RADIATED EMISSIONS ....................................................................................12 APPLICABLE STANDARD ............................................................................................................................................12 MEASUREMENT UNCERTAINTY ..................................................................................................................................12 EUT SETUP ................................................................................................................................................................13 TEST EQUIPMENT SETUP ............................................................................................................................................14 TEST PROCEDURE ......................................................................................................................................................14 CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................................14 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................15 TEST DATA ................................................................................................................................................................15 FCC §15.215(C) – 20 DB BANDWIDTH TESTING ................................................................................................19 APPLICABLE STANDARD ............................................................................................................................................19 TEST PROCEDURE ......................................................................................................................................................19 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................19 TEST DATA ................................................................................................................................................................19 FCC Part 15.249 Page 2 of 20

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 GENERAL INFORMATION Product Description for Equipment under Test (EUT) The Shenzhen Merrytek Technology Co.,LTD’s product, model number: MC601V (FCC ID: 2AI53- MC601V) (the "EUT") in this report was a Lighting Control Switch, which was measured approximately:8 cm (L) x 4.3 cm (W) x 1.7 cm (H), rated input voltage: AC120.0V. All measurement and test data in this report was gathered from production sample serial number: 160616051 (Assigned by BACL, Dongguan). The EUT was received on 2016-06-22. Objective This type approval report is prepared on behalf of Shenzhen Merrytek Technology Co.,LTD. in accordance with Part 2-Subpart J, and Part 15-Subparts A, B and C of the Federal Communication Commissions rules. The tests were performed in order to determine compliance with FCC Part 15, Subpart C, and section 15.203, 15.205,15.207, 15.209 and 15.249 rules. Related Submittal(s)/Grant(s) No related submittal. Test Methodology All measurements contained in this report were conducted with ANSI C63.10-2013, American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices. All emissions measurement was performed and Bay Area Compliance Laboratories Corp. (Dongguan). Test Facility The Test site used by Bay Area Compliance Laboratories Corp. (Dongguan) to collect test data is located on the No.69 Pulongcun, Puxinhu Industrial Zone, Tangxia, Dongguan, Guangdong, China Test site at Bay Area Compliance Laboratories Corp. (Dongguan) has been fully described in reports submitted to the Federal Communication Commission (FCC). The details of these reports have been found to be in compliance with the requirements of Section 2.948 of the FCC Rules on February 06, 2015. The Federal Communications Commission has the reports on file and is listed under FCC Registration No.: 273710. The test site has been approved by the FCC for public use and is listed in the FCC Public Access Link (PAL) database. FCC Part 15.249 Page 3 of 20

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 SYSTEM TEST CONFIGURATION Justification The system was configured for testing in engineering mode with maximum power output. The device operating at 5770MHz. EUT Exercise Software No software was used in testing. Equipment Modifications No modifications were made to the EUT. Support Equipment List and Details Manufacturer Description Model Serial Number Supersun LED LAMP SPSA191227 N/A External I/O Cable Shielding Length Cable Description Ferrite Core From To Type (m) AC Power Line No No 2.0 EUT Lamp Block Diagram of Test Setup LISN1 Led Lamp 10cm EUT Non-Conductive Table 80 cm above Ground Plane 1.5 Meter FCC Part 15.249 Page 4 of 20

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 SUMMARY OF TEST RESULTS FCC Rules Description of Test Result §15.203 Antenna Requirement Compliance §15.207(a) Conduction Emissions Compliance 15.205, §15.209, §15.249 Radiated Emissions Compliance §15.215 (c) 20 dB Bandwidth Compliance FCC Part 15.249 Page 5 of 20

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 FCC§15.203 - ANTENNA REQUIREMENT Applicable Standard For intentional device, according to §15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used. Antenna Connector Construction The EUT has an internal antenna, the antenna gain is 0dBi, fulfill the requirement of this section. Please refer to the EUT photos. Result: Compliant. FCC Part 15.249 Page 6 of 20

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 FCC §15.207 (a) – AC LINE CONDUCTED EMISSIONS Applicable Standard FCC§15.207 Measurement Uncertainty Compliance or non- compliance with a disturbance limit shall be determined in the following manner： If Ulab is less than or equal to Ucispr of Table 1, then: –compliance is deemed to occur if no measured disturbance level exceeds the disturbance limit; –non - compliance is deemed to occur if any measured disturbance level exceeds the disturbance limit. If Ulab is greater than Ucispr of Table 1, then: –compliance is deemed to occur if no measured disturbance level, increased by (Ulab − Ucispr), exceeds the disturbance limit; –non - compliance is deemed to occur if any measured disturbance level, increased by (Ulab − Ucispr), exceeds the disturbance limit. Based on CISPR 16-4-2-2011, measurement uncertainty of conducted disturbance at mains port using AMN at Bay Area Compliance Laboratories Corp. (Dongguan) is 3.12 dB (150 kHz to 30 MHz). Table 1 – Values of Ucispr Measurement Ucispr Conducted disturbance at mains port using AMN (150 kHz to 30 MHz) 3.4 dB EUT Setup FCC Part 15.249 Page 7 of 20

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 The setup of EUT is according with per ANSI C63.10-2013 measurement procedure. The specification used was with the FCC Part 15.207 limits. The spacing between the peripherals was 10 cm. The EUT was connected to a 120 VAC/60 Hz power source. EMI Test Receiver Setup The EMI test receiver was set to investigate the spectrum from 150 kHz to 30 MHz. During the conducted emission test, the EMI test receiver was set with the following configurations: Frequency Range IF B/W 150 kHz – 30 MHz 9 kHz Test Procedure During the conducted emission test, the adapter of laptop was connected to the first LISN. Maximizing procedure was performed on the six (6) highest emissions of the EUT. All data was recorded in the Quasi-peak and average detection mode. Corrected Amplitude & Margin Calculation The basic equation is as follows: VC = VR + AC + VDF Cf = AC + VDF Herein, VC (cord. Reading): corrected voltage amplitude VR: reading voltage amplitude Ac: attenuation caused by cable loss VDF: voltage division factor of AMN Cf: Correction Factor The “Margin” column of the following data tables indicates the degree of compliance within the applicable limit. For example, a margin of 7dB means the emission is 7dB below the maximum limit. The equation for margin calculation is as follows: Margin = Limit – Corrected Amplitude FCC Part 15.249 Page 8 of 20

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date R&S EMI Test Receiver ESCS 30 830245/006 2015-12-10 2016-12-09 R&S L.I.S.N ESH3-Z5 892107/021 2015-07-16 2016-07-15 R&S Two-line V-network ENV 216 3560.6550.12 2015-11-26 2016-11-25 R&S Test Software EMC32 Version8.53.0 N/A N/A * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Results Summary According to the recorded data in following table, the EUT complied with the FCC Part 15.207, with the worst margin reading of: 23.1 dB at 0.429420 MHz in the Line conducted mode Test Data Environmental Conditions Temperature: 26.3°C Relative Humidity: 57 % ATM Pressure: 100.9 kPa The testing was performed by Rocky Xiao on 2016-06-24. FCC Part 15.249 Page 9 of 20

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 Test Mode: Transmitting AC120 V, 60 Hz, Line: 70 Quasi-Peak Limit 60 Average Limit 50 40 Level in dBμ 30 20 10 0 -10 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Frequency Quasi Peak Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.151200 39.2 9.000 L1 10.2 26.7 65.9 Compliance 0.429420 27.9 9.000 L1 10.2 29.4 57.3 Compliance 0.468757 27.3 9.000 L1 10.1 29.2 56.5 Compliance 1.239175 24.3 9.000 L1 10.4 31.7 56.0 Compliance 1.279307 22.1 9.000 L1 10.4 33.9 56.0 Compliance 2.518372 24.1 9.000 L1 10.4 31.9 56.0 Compliance Frequency Average Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.166371 26.1 9.000 L1 10.1 29.0 55.1 Compliance 0.429420 24.2 9.000 L1 10.2 23.1 47.3 Compliance 0.446873 23.4 9.000 L1 10.2 23.5 46.9 Compliance 0.930151 17.2 9.000 L1 10.4 28.8 46.0 Compliance 1.239175 18.7 9.000 L1 10.4 27.3 46.0 Compliance 1.259081 17.1 9.000 L1 10.4 28.9 46.0 Compliance FCC Part 15.249 Page 10 of 20

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 AC120 V, 60 Hz, Neutral: 70 Quasi-Peak Limit 60 Average Limit 50 40 Level in dBμ 30 20 10 0 -10 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Frequency Quasi Peak Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.150000 36.3 9.000 N 10.2 29.7 66.0 Compliance 0.409372 27.9 9.000 N 10.2 29.8 57.7 Compliance 0.495646 25.8 9.000 N 10.1 30.3 56.1 Compliance 0.786832 22.8 9.000 N 10.3 33.2 56.0 Compliance 1.385415 25.7 9.000 N 10.4 30.3 56.0 Compliance 15.126541 23.4 9.000 N 10.7 36.6 60.0 Compliance Frequency Average Bandwidth Corr. Margin Limit Line Comment (MHz) (dBμV) (kHz) (dB) (dB) (dBμV) 0.167702 27.3 9.000 N 10.1 27.8 55.1 Compliance 0.429420 20.5 9.000 N 10.2 26.8 47.3 Compliance 0.446873 20.6 9.000 N 10.1 26.3 46.9 Compliance 1.239175 18.9 9.000 N 10.4 27.1 46.0 Compliance 1.363512 17.1 9.000 N 10.4 28.9 46.0 Compliance 15.126541 22.8 9.000 N 10.7 27.2 50.0 Compliance FCC Part 15.249 Page 11 of 20

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 FCC§15.205, §15.209&§15.249- RADIATED EMISSIONS Applicable Standard As per FCC§15.249 (a), except as provided in paragraph (b) of this section, the field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following: Fundamental Field strength of fundamental Field strength of harmonics frequency (millivolts/meter) (microvolts/meter) 902–928 MHz 50 500 2400–2483.5 MHz 50 500 5725–5875 MHz 50 500 24.0–24.25 GHz 250 2500 As per FCC§15.249 (c), Field strength limits are specified at a distance of 3 meters. (d) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in §15.209, whichever is the lesser attenuation. Measurement Uncertainty Compliance or non- compliance with a disturbance limit shall be determined in the following manner： If Ulab is less than or equal to Ucispr of Table 1, then: –compliance is deemed to occur if no measured disturbance level exceeds the disturbance limit; –non - compliance is deemed to occur if any measured disturbance level exceeds the disturbance limit. If Ulab is greater than Ucispr of Table 1, then: –compliance is deemed to occur if no measured disturbance level, increased by (Ulab − Ucispr), exceeds the disturbance limit; –non - compliance is deemed to occur if any measured disturbance level, increased by (Ulab − Ucispr), exceeds the disturbance limit. Based on CISPR 16-4-2: 2011, measurement uncertainty of radiated emission at a distance of 3m at Bay Area Compliance Laboratories Corp. (Dongguan) is: 30M~200MHz: 4.58 dB for Horizontal, 4.59 dB for Vertical; 200M~1GHz: 4.83 dB for Horizontal, 5.85 dB for Vertical; 1G~6GHz: 4.45 dB, 6G~18GHz: 5.23 dB FCC Part 15.249 Page 12 of 20

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 Table 1 – Values of Ucispr Measurement Ucispr Radiated disturbance (electric field strength at an OATS or in a SAC) (30 MHz to 1000 MHz) 6.3 dB Radiated disturbance (electric field strength in a FAR) (1 GHz to 6 GHz) 5.2 dB Radiated disturbance (electric field strength in a FAR) (6 GHz to 18 GHz) 5.5 dB EUT Setup Below 1 GHz: Above 1 GHz: The radiated emission and out of band emission tests were performed in the 3 meters chamber test site, using the setup accordance with the ANSI C63.10-2013 The specification used was the FCC 15.209/15.205 and FCC 15.249 limits. FCC Part 15.249 Page 13 of 20

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 Test Equipment Setup The system was investigated from 30 MHz to 40 GHz. During the radiated emission test, the EMI test receiver & Spectrum Analyzer Setup were set with the following configurations: Frequency Range RBW Video B/W IF B/W Detector 30 MHz – 1000 MHz 120 kHz 300 kHz 120 kHz QP 1MHz 3 MHz / PK Above 1 GHz 1MHz 10 Hz / Ave. Test Procedure Maximizing procedure was performed on the highest emissions to ensure that the EUT complied with all installation combinations. All data was recorded in the Quasi-peak detection mode from 30 MHz to 1GHz, peak and average detection mode above 1 GHz. Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Loss, and subtracting the Amplifier Gain from the Meter Reading. The basic equation is as follows: Corrected Amplitude = Meter Reading + Antenna Factor + Cable Loss - Amplifier Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of 7dB means the emission is 7dB below the limit. The equation for margin calculation is as follows: Margin = Limit –Corrected Amplitude FCC Part 15.249 Page 14 of 20

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date R&S EMI Test Receiver ESCI 100224 2015-08-03 2016-08-02 Sunol Antenna JB3 A060611-3 2014-11-06 2017-11-05 Sciences HP Amplifier 8447E 2434A02181 2015-09-01 2016-09-01 Agilent Spectrum Analyzer E4440A SG43360054 2015-11-23 2016-11-22 ETS-Lindgren Horn Antenna 3115 9808-5557 2015-09-06 2018-09-06 Mini-Circuit Amplifier ZVA-213-S+ 054201245 2016-02-19 2017-02-19 R&S Spectrum Analyzer FSP 38 100478 2016-05-09 2017-05-09 Ducommun 1007726-01 Horn Antenna ARH-4223-02 2014-06-16 2017-06-15 Technolagies 1304 QLW- Quinstar Amplifier 15964001001 2015-09-06 2016-09-06 18405536-JO N/A Coaxial Cable 14m N/A 2016-05-06 2017-05-06 N/A Coaxial Cable 8m N/A 2016-05-06 2017-05-06 Ducommun 1007726-01 Horn Antenna ARH-2823-02 2014-06-16 2017-06-15 Technolagies 1302 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Data Environmental Conditions Temperature: 27.1 oC Relative Humidity: 48 % ATM Pressure: 100.1 kPa The testing was performed by Rocky Xiao on 2016-06-27. Test Mode: Transmitting FCC Part 15.249 Page 15 of 20

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 Test Mode: Transmitting 30MHz-1GHz： Horizontal Receiver Correction Cord. Frequency Limit Margin Reading Detector Factor Amp. (MHz) (dBμV/m) (dB) (dBμV) (dB/m) (dBμV/m) 30.0000 24.65 QP 0.95 25.60 40.00 14.40 103.7200 25.80 QP -8.60 17.20 43.50 26.30 213.3300 31.44 QP -8.94 22.50 43.50 21.00 336.5200 26.05 QP -5.15 20.90 46.00 25.10 384.0500 25.49 QP -4.09 21.40 46.00 24.60 451.9500 24.23 QP -2.43 21.80 46.00 24.20 FCC Part 15.249 Page 16 of 20

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 Vertical Receiver Correction Cord. Frequency Limit Margin Reading Detector Factor Amp. (MHz) (dBμV/m) (dB) (dBμV) (dB/m) (dBμV/m) 30.0000 27.55 QP 0.95 28.50 40.00 11.50 41.6400 42.85 QP -7.65 35.20 40.00 4.80 61.0400 40.29 QP -12.89 27.40 40.00 12.60 89.1700 35.62 QP -12.02 23.60 43.50 19.90 127.0000 28.00 QP -5.60 22.40 43.50 21.10 188.1100 35.18 QP -8.28 26.90 43.50 16.60 FCC Part 15.249 Page 17 of 20

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 Receiver Rx Antenna Cable Amplifier Corrected Frequency Limit Margin Reading Polar Factor loss Gain Amplitude (MHz) Detector (dBμV/m) (dB) (dBμV) (H/V) (dB(1/m)) (dB) (dB) (dBμV/m) 5770 71.08 PK H 32.15 5.49 26.57 82.15 114.00 31.85 5770 49.86 AV H 32.15 5.49 26.57 60.93 94.00 33.07 5770 87.3 PK V 32.15 5.49 26.57 98.37 114.00 15.63 5770 65.56 AV V 32.15 5.49 26.57 76.63 94.00 17.37 5725 29.4 PK V 32.15 5.60 26.63 40.52 74.00 33.48 11540 34.51 PK V 37.90 8.94 26.10 55.25 74.00 18.75 11540 22.37 AV V 37.90 8.94 26.10 43.11 54.00 10.89 17310 29.53 PK V 41.36 13.25 25.63 58.51 74.00 15.49 17310 17.18 AV V 41.36 13.25 25.63 46.16 54.00 7.84 6875 31.3 PK V 33.28 6.31 26.51 44.38 74.00 29.62 6875 18.87 AV V 33.28 6.31 26.51 31.95 54.00 22.05 10425 30.02 PK V 36.99 8.29 25.66 49.64 74.00 24.36 10425 17.58 AV V 36.99 8.29 25.66 37.20 54.00 16.80 FCC Part 15.249 Page 18 of 20

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 FCC §15.215(c) – 20 dB BANDWIDTH TESTING Applicable Standard Intentional radiators operating under the alternative provisions to the general emission limits, as contained in §§ 15.217 through 15.257 and in Subpart E of this part, must be designed to ensure that the 20 dB bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the equipment operates, is contained within the frequency band designated in the rule section under which the equipment is operated. Test Procedure 1. Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. 2. Position the EUT on the test table without connection to measurement instrument. Turn on the EUT. Then set it to any one convenient frequency within its operating range. Set a reference level on the measuring instrument equal to the highest peak value. 3. Measure the frequency difference of two frequencies that were attenuated 20 dB from the reference level. Record the frequency difference as the emission bandwidth. 4. Repeat above procedures until all frequencies measured were complete. Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date R&S Spectrum Analyzer FSP 38 100478 2015-11-23 2016-11-22 EMDCB- E-Microwave DC Blocking 0E01201047 2016-05-06 2017-05-06 00036 N/A Coaxial Cable 0.1m N/A 2016-05-06 2017-05-06 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). Test Data Environmental Conditions Temperature: 28.4 °C Relative Humidity: 40 % ATM Pressure: 100.3 kPa * The testing was performed by Rocky Xiao on 2016-07-06. Test Result: Compliant. Please refer to following tables and plots FCC Part 15.249 Page 19 of 20

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG160616051-00 Test Mode: Transmitting Frequency 20 dB Bandwidth (MHz) (MHz) 5770 3.208 Middle Channel ***** END OF REPORT ***** FCC Part 15.249 Page 20 of 20


Document Created: 2019-09-12 10:47:35
Document Modified: 2019-09-12 10:47:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC