Test report

FCC ID: 2AI4T-XNKF01

Test Report

Download: PDF
FCCID_4467160

FCC TEST REPORT FCC ID: 2AI4T-XNKF01 On Behalf of Shenzhen Xhorse Electronics Co., Ltd. Universal Smart Key Model No.: XNKF01, XSKF01 Prepared for : Shenzhen Xhorse Electronics Co., Ltd. 2009-2011,Changhong Science and Technology Building, Science Park Address : South Twelfth Road, High Tech Science Park,Nanshan District, Shenzhen,China Prepared By : Shenzhen Alpha Product Testing Co., Ltd. Building i, No.2, Lixin Road, Fuyong Street, Bao’an District, 518103, Address : Shenzhen, Guangdong, China Report Number : T1881255 06 Date of Receipt : August 09, 2018 Date of Test : August 09, 2018-September 04, 2018 Date of Report : September 29, 2019 Version Number : REV0

Page 2 of 29 Report No.: T1881255 06 Contents 1. General Information ..................................................................................................................... 5 1.1. Description of Device (EUT) ...............................................................................5 1.2. Accessories of Device (EUT)...............................................................................6 1.3. Tested Supporting System Details .......................................................................6 1.4. Test Facility ..........................................................................................................6 2. Summary of test ............................................................................................................................ 7 2.1. Summary of test result .........................................................................................7 2.2. Block Diagram .....................................................................................................8 2.3. Test mode .............................................................................................................8 2.4. Test Conditions.....................................................................................................8 2.5. Measurement Uncertainty (95% confidence levels, k=2) ....................................8 2.6. Test Equipment.....................................................................................................9 3. Radiation Emission ..................................................................................................................... 10 3.1. Radiation Emission Limits(15.209&231) ..........................................................10 3.2. Test Setup ...........................................................................................................10 3.3. Test Procedure ....................................................................................................12 3.4. Test Equipment Setting For emission test. .........................................................12 3.5. Test Condition ....................................................................................................12 3.6. Test Result ..........................................................................................................12 4. Power Line Conducted Emission ............................................................................................... 16 4.1. Conducted Emission Limits (15.209) ................................................................16 4.2. Test Setup ...........................................................................................................16 4.3. Test Procedure ....................................................................................................17 4.4. Test Results ........................................................................................................17 5. Occupied bandwidth ................................................................................................................... 18 5.1. Test limit.............................................................................................................18 5.2. Method of measurement .....................................................................................18 5.3. Test Setup ...........................................................................................................18 5.4. Test Results ........................................................................................................18 6. Transmission time ....................................................................................................................... 20 6.1. Test limit.............................................................................................................20 6.2. Method of measurement .....................................................................................20 6.3. Test Setup ...........................................................................................................20 6.4. Test Results ........................................................................................................21 7. Antenna Requirement................................................................................................................. 23 7.1. Standard Requirement ........................................................................................23 7.2. Antenna Connected Construction ......................................................................23 7.3. Result..................................................................................................................23 8. Test setup photo .......................................................................................................................... 24 9. Photos of EUT.............................................................................................................................. 25

Page 3 of 29 Report No.: T1881255 06 TEST REPORT DECLARATION Applicant : Shenzhen Xhorse Electronics Co., Ltd. 2009-2011,Changhong Science and Technology Building, Science Park South Address : Twelfth Road, High Tech Science Park,Nanshan District, Shenzhen,China Manufacturer : Shenzhen Xhorse Electronics Co., Ltd. 2009-2011,Changhong Science and Technology Building, Science Park South Address : Twelfth Road, High Tech Science Park,Nanshan District, Shenzhen,China EUT Description : Universal Smart Key (A) Model No. : XNKF01, XSKF01 (B) Trademark : Measurement Standard Used: FCC Rules and Regulations Part 15 Subpart C Section 15.231 ANSI C63.10-2013 The device described above is tested by Shenzhen Alpha Product Testing Co., Ltd. to determine the maximum emission levels emanating from the device. The maximum emission levels are compared to the FCC Part 15 Subpart C limits both conducted and radiated emissions. The test results are contained in this test report and Shenzhen Alpha Product Testing Co., Ltd. is assumed of full responsibility for the accuracy and completeness of these tests. After the test, our opinion is that EUT compliance with the requirement of the above standards. This report applies to above tested sample only. This report shall not be reproduced in parts without written approval of Shenzhen Alpha Product Testing Co., Ltd. Reak Yang Tested by (name + signature)........…..: …………………………………. Project Engineer Simple Guan Approved by (name + signature)…....: Project Manager …………………………………. Date of issue…… …………………..: September 29, 2019

Page 4 of 29 Report No.: T1881255 06 Revision History Revision Issue Date Revisions Revised By REV0 September 29, 2019 Initial released Issue Simple Guan

Page 5 of 29 Report No.: T1881255 06 1. General Information 1.1. Description of Device (EUT) EUT : Universal Smart Key Model No. : XNKF01, XSKF01 All model’s the function, software and electric circuit are the same, DIFF. : except the model number difference. This report performs the model XNKF01. Trade mark : Power supply : DC 3V from battery Operation frequency : 433.92MHz, 315MHz Modulation : ASK Antenna Type : Internal antenna, max gain 0dBi. Software version : V1.0.0 Hardware version : V6

Page 6 of 29 Report No.: T1881255 06 1.2. Accessories of Device (EUT) Accessories1 : / Manufacturer : / Model : / Power supply : / 1.3. Tested Supporting System Details Certification or No. Description Manufacturer Model Serial Number DOC / / / / / / 1.4. Test Facility Shenzhen Alpha Product Testing Co., Ltd Building i, No.2, Lixin Road, Fuyong Street, Bao’an District, 518103, Shenzhen, Guangdong, China June 21, 2018 File on Federal Communication Commission Registration Number: 293961 July 15, 2019 Certificated by IC Registration Number: CN0085

Page 7 of 29 Report No.: T1881255 06 2. Summary of test 2.1. Summary of test result Description of Test Item Standard Results Spurious Emission Section 15.231&15.209 PASS Conduction Emission Section 15.207 N/A Occupied bandwidth Section 15.231 PASS Transmission time Section 15.231 PASS Band Edge Section 15.231 N/A Antenna Requirement Section 15.203 PASS Note ：Test according to ANSI C63.10-2013

Page 8 of 29 Report No.: T1881255 06 2.2. Block Diagram 1. For radiated emissions test: EUT was placed on a turn table, which is 0.8 meters high above ground for below 1 GHz test and 1.5 meters high above ground for below 1 GHz test . EUT was set into test mode before test. New battery is used during all test EUT 2.3. Test mode EUT work in Continuous TX mode, and select test channel, wireless mode Tested mode, channel, and data rate information Frequency Mode Channel (MHz) CH1 433.92 ASK CH2 315 2.4. Test Conditions Temperature range 21-25℃ Humidity range 40-75% Pressure range 86-106kPa 2.5. Measurement Uncertainty (95% confidence levels, k=2) Item MU Remark Uncertainty for Power point Conducted Emissions Test 2.71dB Uncertainty for Radiation Emission test in 3m chamber 3.90 dB Polarize: V (30MHz to 1GHz) 3.92dB Polarize: H Uncertainty for Radiation Emission test in 3m chamber 4.26 dB Polarize: H (1GHz to 25GHz) 4.28 dB Polarize: V Uncertainty for conducted RF Power 0.16dB

Page 9 of 29 Report No.: T1881255 06 2.6. Test Equipment Equipment Manufacture Model No. Serial No. Last Cal. Cal Interval 3m Semi-Anechoic ETS-LINDGREN N/A SEL0017 1Year 2018.09.29 Spectrum analyzer Agilent E4407B MY49510055 1Year 2018.09.29 Receiver R&S ESCI 101165 1Year 2018.09.29 Bilog Antenna SCHWARZBECK VULB 9168 9168-438 2Year 2018.09.30 Horn Antenna SCHWARZBECK BBHA 9120 D BBHA 9120 2Year 2018.09.30 D(1201) Active Loop Beijing Daze ZN30900A SEL0097 1Year 2018.09.29 Antenna Cable Resenberger SUCOFLEX MY6562/4 1Year 2018.09.29 104 Cable Resenberger SUCOFLEX 309972/4 1Year 2018.09.29 104 Cable Resenberger SUCOFLEX 329112/4 1Year 2018.09.29 104 Pre-amplifier SCHWARZBECK BBV9743 9743-019 1Year 2018.09.29 Pre-amplifier Quietek AP-180C CHM-0602012 1Year 2018.09.29

Page 10 of 29 Report No.: T1881255 06 3. Radiation Emission 3.1. Radiation Emission Limits(15.209&231) Frequency Field Strength (MHz) Limits at 3 metres (watts, e.i.r.p.) uV/m dB uV/m Measurement distance(m) 0.009-0.490 2400/F(kHz) XX 300 0.490-1.705 24000/F(kHz) XX 30 1.705-30 30 29.5 30 30~88 100(3nW) 40 3 88~216 150(6.8nW) 43.5 3 216~960 200(12nW) 46 3 Above960 500(75nW) 54 3 Carrier 75.6(AV) 3 frequency Carrier 95.6(PK) 3 frequency NOTE: a) The tighter limit applies at the band edges. b) Emission Level(dB uV/m)=20log Emission Level(Uv/m) 3.2. Test Setup See the next page.

Page 11 of 29 Report No.: T1881255 06 Below 30MHz Test Setup Above 30MHz Test Setup Above 1GHz Test Setup

Page 12 of 29 Report No.: T1881255 06 3.3. Test Procedure a) The EUT was placed on a non-metallic table, 80 cm above the ground plane inside a semi-anechoic chamber for below 1GHz and 150 cm above the ground plane inside a semi-anechoic chamber for above 1GHz. The table was rotated 360 degrees to determine the position of the highest radiation. b) The Test antenna shall vary between 1m and 4m,Both Horizontal and Vertical antenna are set ot make measurement. c) The initial step in collecting conducted emission data is a spectrum analyzer Peak detector mode pre-scanning the measurement frequency range. Significent Peaks are then marked. and then Qusia Peak Detector mode remeasured d) If Peak value comply with QP limit Below 1GHz.The EUT deemed to comply with QP limit. But the Peak value and average value both need to comply with applicable limit above 1GHz. e) For the actual test configuration, please see the test setup photo. 3.4. Test Equipment Setting For emission test. 9KHz~150KHz RBW 200Hz VBW1KHz 150KHz~30MHz RBW 9KHz VBW 30KHz 30MHz~1GHz RBW 120KHz VBW 300KHz Above 1GHz RBW 1MHz VBW 3MHz 3.5. Test Condition Continual Transmitting in maximum power(The new battery be used during Test) 3.6. Test Result We have scanned the 10th harmonic from 9KHz to the EUT. Detailed information please see the following page. From 9KHz to 30MHz: Conclusion: PASS Note: The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported.

Page 13 of 29 Report No.: T1881255 06 Notes: 1 --Means other frequency and mode comply with standard requirements and at least have 20dB margin. Correct Factor=Cable Loss+Antenna Factor-Amplifier Gain Measurement Result=Reading + Correct Factor Margin=Measurement Result-Limit 2 –Spectrum setting: a. Peak setting 30MHz-1GHz, RBW=100KHz, VBW=300KHz. 3- PK measure result values is less than the AVG limit values, so AV measure result values test not applicable.

Page 14 of 29 Report No.: T1881255 06 Radiated Emissions Result of Inside band EUT Universal Smart Key Model Name XNKF01 Temperature 24oC Relative Humidity 56% Pressure 960hPa Test voltage DC 3V from battery Test Mode TX 433.92MHz Test by Ella Liang Channel (433.92MHz Below 1GHz) Fre. Plority Reading Antenna Cable Amplifier Correct Measure Limit Margin dBuV Factor Loss Gain Factor Result dBuV/m dB MHz H/V dB dB dB dB dBuV/m 433.92 H 85.55 15.58 0.67 27.22 -10.97 74.58 100.8 PK -26.22 433.92 H -- --- -- -- -- -- 80.8 AV -- 867.84 H 47.56 21.26 0.67 27.22 -5.29 42.27 80.8 PK -38.53 867.84 H -- --- -- -- -- -- 60.8 AV -- 157.01 H 30.27 22.1 0.67 27.22 -4.45 25.82 46 PK -20.18 672.84 H 30.65 20.64 0.67 27.22 -5.91 24.74 46 AV -21.26 433.92 V 86.85 15.58 0.67 27.22 -10.97 75.88 100.8 PK -24.92 -- V -- --- -- -- -- -- 80.8 AV -- 867.84 V 48.24 21.26 0.67 27.22 -5.29 42.95 80.8 PK -37.85 -- V -- --- -- -- -- -- 60.8 AV -- 301.43 V 31.16 22.1 0.67 27.22 -4.45 26.71 46 PK -19.29 501.18 V 31.10 20.64 0.67 27.22 -5.91 25.19 46 AV -20.81 Channel (433.92MHz Above 1GHz) Peak AV Peak Freq. Ant. Pol Ant. / CL Actual Fs Margin Reading Reading Limit Remark (MHz) H/V CF (dB) Peak (dB) (dBuV) (dBuV) (dBuV/m) (dBuV/m) 1301.76 V 56.40 --- -10.41 45.99 74 -28.01 Peak -- V -- --- -- -- 54 -- -- 1301.76 H 56.46 --- -10.41 46.05 74 -27.95 Peak -- H -- --- -- -- 54.00 -- --

Page 15 of 29 Report No.: T1881255 06 EUT Universal Smart Key Model Name XNKF01 o Temperature 24 C Relative Humidity 56% Pressure 960hPa Test voltage DC 3V from battery Test Mode TX 315MHz Test by Ella Liang Channel (315MHz Below 1GHz) Fre.Plority Reading Antenna Cable Amplifier Correct Measure Limit Margin Remark dBuV Factor Loss Gain Factor Result dBuV/m dB MHz H/V dB dB dB dB dBuV/m 315 H 85.49 13.19 0.67 27.22 -13.36 72.13 75.6 -3.47 Peak 630 H 52.10 18.12 0.67 27.22 -8.43 43.67 55.6 -11.93 Peak 945 H 52.72 22.1 0.67 27.22 -4.45 48.27 55.6 -7.33 Peak 315 V 78.99 13.19 0.67 27.22 -13.36 65.63 75.6 -9.97 Peak 630 V 45.99 18.12 0.67 27.22 -8.43 37.56 55.6 -18.04 Peak 945 V 52.58 22.1 0.67 27.22 -4.45 48.13 55.6 -7.47 Peak Channel (315MHz Above 1GHz) Freq. Ant. Pol Peak AV Ant. / CL Peak Margin Actual Fs (MHz) H/V Reading Reading CF Limit (dB) Remark Peak (dBuV) (dBuV) (dB) (dBuV/m) (dBuV/m) 1250 V 52.88 --- -10.01 42.87 74 -31.13 Peak -- V -- --- -- -- -- -- -- 1250 H 51.45 --- -10.0 41.45 74 -32.55 Peak -- H -- --- -- -- -- -- --

Page 16 of 29 Report No.: T1881255 06 4. Power Line Conducted Emission 4.1. Conducted Emission Limits (15.209) Frequency Limits dB(μV) MHz Quasi-peak Level Average Level 0.15 -0.50 66 -56* 56 - 46* 0.50 -5.00 56 46 5.00 -30.00 60 50 Notes: 1. *Decreasing linearly with logarithm of frequency. 2. The lower limit shall apply at the transition frequencies. 3.The limit decreases in line with the logarithm of the frequency in the rang of 0.15 to 0.50 MHz. 4.2. Test Setup

Page 17 of 29 Report No.: T1881255 06 4.3. Test Procedure The EUT is put on the plane 0.8m high above the ground by insulating support and is connected to the power mains through a line impedance stabilization network (L.I.S.N.). This provides a 50ohm coupling impedance for the EUT system. Please refer the block diagram of the test setup and photographs. Both sides of AC lines are checked to find out the maximum conducted emission. In order to find the maximum emission levels, the relative positions of equipment and all of the interface cables shall be changed according to ANSI C63.10-2013 on Conducted Emission Measurement. The bandwidth of test receiver (R & S ESCI) is set at 9 kHz. 4.4. Test Results EUT power supply by battery, so the test not applicable.

Page 18 of 29 Report No.: T1881255 06 5. Occupied bandwidth 5.1. Test limit Please refer section RSS-210 & 15.231 According to§15.231(C), The bandwidth of the emission shall be no wider than 0.25% of the center frequency for devices operating above 70MHz and below 900MHz. 5.2. Method of measurement a)The bandwidth is measured at an amplitude level reduced 20dB from the reference level. The reference level is the level of the highest amplitude signal observed from the transmitter at the fundamental frequency. Once the reference level is established, the equipment is conditioned with typical modulating signal to produce the worst-case (i.e. the widest) bandwidth. b)The test receiver RBW set 30KHz,VBW set 30KHz,Sweep time set auto. 5.3. Test Setup Spectrum EUT Analyzer 5.4. Test Results Freq 20dB Bandwidth 99% Limit Mode Conclusion (MHz) (KHz) Bandwidth (kHz) ASK 433.92 517.3 / 1084.8 PASS ASK 315.00 528.2 / 787.5 PASS Note: Limit = 433.92MHz *0.25% = 1084.8 kHz Limit = 315MHz *0.25% = 787.5 kHz

Page 19 of 29 Report No.: T1881255 06

Page 20 of 29 Report No.: T1881255 06 6. Transmission time 6.1. Test limit Please refer sectionRSS-210 & 15.231 According to §15.231(a)(1), A manually operated transmitter shall employ a switch that will automatically deactivate the transmitter within not more than 5 seconds of being released. 6.2. Method of measurement 6.2.1. Place the EUT on the table and set it in transmitting mode. 6.2.2. Remove the antenna from the EUT and then connect a low loss RF cable from the antenna port to the spectrum analyzer. 6.2.3. Set spectrum analyzer Center= 433.92MHz, Span = 0MHz, Sweep = 10s. 6.2.4. Set the spectrum analyzer as RBW, VBW=100kHz, 6.2.5. Max hold, view and count how many channel in the band. 6.3. Test Setup Spectrum EUT Analyzer

Page 21 of 29 Report No.: T1881255 06 6.4. Test Results Freq Test Result(s) Limit (s) Conclusion (MHz) 433.92 0.18 < 5s PASS 315.00 0.19 < 5s PASS

Agilent Spectrum Analyzer — Swept SA onfint.ceie en t = Center Freq 315.000000 MHz Avg Type: Log.Pur n 5 Trig:Free Run AvglHold: 81100 e Aten: 6 dB Ref Offset 10 dB Loode c CenterFreq X 215.000000 MHz Center 315.000000 MHz Span 0 Hz Mss VBW 300 kHz Sweep 10.00 s (1001 pts) use stams

Page 23 of 29 Report No.: T1881255 06 7. Antenna Requirement 7.1. Standard Requirement An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. 7.2. Antenna Connected Construction The directional gains of antenna used for transmitting is 0 dBi, and the antenna connector is de- signed with permanent attachment and no consideration of replacement. Please see EUT photo for details. 7.3. Result The EUT antenna is Internal antenna. It comply with the standard requirement.

Page 24 of 29 Report No.: T1881255 06 8. Test setup photo Photos of Radiated emission

Page 25 of 29 Report No.: T1881255 06 9. Photos of EUT — l so m io un ho &n

Page 26 of 29 Report No.: T1881255 06 A \1'

Page 27 of 29 Report No.: T1881255 06

Page 28 of 29 Report No.: T1881255 06 — mumpiing

Page 29 of 29 Report No.: T1881255 06 ---------END OF THE REPORT——————


Document Created: 2019-09-29 18:57:29
Document Modified: 2019-09-29 18:57:29
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC