RF exposure report

FCC ID: 2AI3TBT-019

RF Exposure Info

Download: PDF

FCCID_3119116

RF exposure evaluation

The RF exposure evaluation was calculated as below：
1) For BT3.0+EDR: The maximum output power for antenna is 1.59dBm (1.44mW) at 2480MHz.
For BT4.0: The maximum output power for antenna is 0.55dBm (1.14mW) at 2440MHz.
2) For Bluetooth device or fixed location transmitters, no SAR consideration applied.
3) Per KDB 447498 D01v05r02, the 1-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test
separation distances ≤ 50 mm are determined by:
[(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)]
≤ 3.0 for 1-g SAR, where
x f(GHz) is the RF channel transmit frequency in GHz
x Power and distance are rounded to the nearest mW and mm before calculation
x When the minimum test separation distance is < 5 mm, a distance of 5 mm according is applied to
determine SAR test exclusion.

For BT3.0+EDR:
x The result is rounded to one decimal place for comparison
Test exclusion
Frequency Power Max. Power
Channel distance Result thresholds
(GHz) (dBm) (mW)
(mm) for 1-g SAR
CH 78 2.48 1.59 1.44 5 0.454 3.0

For BT4.0:
x The result is rounded to one decimal place for comparison
Test exclusion
Frequency Power Max. Power
Channel distance Result thresholds
(GHz) (dBm) (mW)
(mm) for 1-g SAR
CH 19 2.44 0.55 1.14 5 0.356 3.0

x Base on the calculation value, the RF exposure evaluation is not required.
x The public is not exposed to radio frequency energy level in excess of the Commission’s guideline.

Document Created: 2016-08-25 17:09:01
Document Modified: 2016-08-25 17:09:01

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC